重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

导电密封胶对不锈钢车体电阻点焊焊接性能影响研究

分析了电阻点焊原理,对相同的点焊搭接方式,分别采用3种工况进行焊接试验。3种工况分别采用相同焊接参数对搭接接触面涂导电密封胶和不涂导电密封胶的试件进行焊接;优化焊接参数后,对搭接接触面涂导电密封胶的试验件进行焊接。对3种工况下完成的焊接试件进行拉伸力检测试验、金相熔核尺寸检测和缺陷检测试验,对熔核直径、拉伸力、熔核内部缺陷的试验结果进行分析。试验结果表明:导电密封胶对电阻点焊的焊接性能存在影响;通过适当优化焊接参数,可以提高涂导电密封胶试件的焊接性能,焊接质量能够满足产品焊接要求。     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

Generalized Maximum Benefit Multiple Chinese Postman Problem

This research is focused on a generalization on the Max Benefit Chinese Postman Problem and the multiple vehicle variant of the Chinese Postman Problem. We call this generalization, the Generalized Maximum Benefit k-Chinese Postman Problem (GB k-CPP). We present a novel Mixed Integer Programming (MIP) formulation for the GB k-CPP. Four different cases of the model are discussed. The first case, performs arc-routing with profits and assumes that the origin and destination for each vehicle is the same for each cycle and is given by the user. The next case relaxes the assumption that the origin and destination for each vehicle should be the same and allows the users to select possible origins/destinations for vehicles. Case three gets the origin for each vehicle as input and produces a solution based on finding the best destination for each vehicle. The last case, that is very general, allows the optimization model to select possibly different locations for vehicle origin and destination, during each cycle. The different cases are applied to a security patrolling case conducted on the network of University of Maryland at College Park campus and the results are compared.     

Heterogeneous hazard model of PEV users charging intervals: Analysis of four year charging transactions data

Public charging infrastructure represents a key success factor in the promotion of plug-in electric vehicles (PEV). Given that a large initial investment is required for the widespread adoption of PEV, many studies have addressed the location choice problem for charging infrastructure using a priori simple assumptions. Ideally, however, identifying optimal locations of charging stations necessitates an understanding of charging behavior. Limited market penetration of PEV makes it difficult to grasp any regularities in charging behavior. Using a Dutch data set about four-years of charging transactions, this study presents a detailed analysis of inter-charging times. Recognizing that PEV users may exhibit different charging behavior, this study estimates a latent class hazard duration model, which accommodates duration dependence, unobserved heterogeneity and the effects of time-varying covariates. PEV users are endogenously classified into regular and random users by treating charging regularity as a latent variable. The paper provides valuable insights into the dynamics of charging behavior at public charging stations, and which strategies can be successfully used to improve the performance of public charging infrastructure.     

Evaluating sustainability of supply chains by two-stage range directional measure in the presence of negative data

Assessing sustainability of supply chains is a critical and increasingly complex problem. In recent years sustainability has received more attention in supply chain management (SCM) literature with triple bottom lines including social, environmental, and economic factors. Conventional data envelopment analysis (DEA) models consider decision making units (DMUs) as black boxes that consume a set of inputs to produce a set of outputs and do not take into consideration internal interactions of DMUs. Two-stage DEA models deal with such DMUs. However, existing two-stage DEA models are applicable only in technologies characterized by positive inputs/outputs. This paper aims to build and present a new two-stage DEA model considering negative input-intermediate-output data. Some numerical examples along with some theorems and properties are given to show capability of proposed method. The proposed ideas are used in a case study where 29 Iranian supply chains producing equipment of expendable medical devices are evaluated in terms of sustainability.     

鱼雷定深航行稳定性的分叉分析

鱼雷定深运动方程含有诸多的非线性项，用传统的分析方法对其稳定性进行研究有较大难度。运用非线性科学中的分叉理论，选定鱼雷定深运动方程中的某一流体动力系数扰动值为分叉参数，系统地分析在经典比例微分深度控制系统作用下，鱼雷在退化平衡点处的航行稳定性。利用中心流形定理，推导出系统状态变量解析表达式，对系统 Hopf分叉进行分析，并进行仿真验证。结果表明，流体动力系数变化使定深航行产生 Hopf分叉，并给出了确保鱼雷稳定航行的流体动力参数取值范围。     

基于FLAC软件模拟强夯加固吹填砂地基

基于港区陆域吹填项目,采用FLAC软件建立三维模型,模拟了不同夯能、夯击次数对强夯效果的影响,对强夯前后杨氏模量的变化进行了分析研究。结果表明,表层吹填砂厚度和下卧软土层分布对夯能的大小起着决定作用。对于下卧松散砂层,可适当加大夯击能量和夯击次数(7~8击),增加其处理深度和效果;而对于下卧软黏土层,可以适当减小夯击能量并增加夯击次数,以提高加固效果。夯击之后,表层吹填砂的杨氏模量有较大的提高,从原来的10 MPa提高到20~40 MPa。     

电子车辆识别技术的性能、安全性和成本分析及应用

电子车辆识别(EVI)是利用电子信号对车辆进行自动识别和监测的技术.随着RFID技术的不断发展,EVI应用的领域和范围不断扩大,这对EVI的性能、安全性和成本提出了更高的要求.     

Urban single-lane roundabouts: A new analytical approach using multi-criteria and simultaneous multi-objective optimization of geometry design,efficiency and safety

Building safe and effective roundabouts requires optimizing traffic (operational) efficiency (TE) and traffic safety (TS) while taking into account geometric factors, traffic characteristics and local constraints. Most existing simulation-based optimization models do not simultaneously optimize all these factors. To capture the relationship among geometry, efficiency and safety, we put forward a model formulation in this paper. We present a new multi-criteria and simultaneous multi-objective optimization (MOO) model approach to optimize geometry, TE and TS of urban unsignalized single-lane roundabouts. To the best of our knowledge, this is the first model that uses the multi-criteria decision-making method known as analytic hierarchy process to evaluate and rank traffic parameters and geometric elements of urban single-lane roundabouts. The model was built based on comprehensive review of the research literature and existing roundabout simulation software, a field survey of 61 civil and traffic expert engineers in Croatia, and field studies of roundabouts in the Croatian capital city of Zagreb. We started from the basis of Kimber’s capacity model, HCM2010 serviceability model, and Maycock and Hall's accident prediction model, which we extended by adding sensitivity analysis and powerful MOO procedures of the bounded objective function method and interactive optimization. Preliminary validation of the model was achieved by identifying the optimal and most robust of three geometric alternatives (V.1-V.3) for an unsignalized single-lane roundabout in Zagreb, Croatia. The geometric parameters in variant V.1 had significantly higher values than in the existing design V.0, while approaches 1 and 3 in variant V.2 were enlarged as much as possible within allowed spatial limits and Croatian guidelines, reflecting their higher traffic demand. Sensitivity analysis indicated that variant V.2 showed the overall highest TE and TS across the entire range of traffic flow demand and pedestrian crossing flow demand at approaches. At the same time, the number of predicted traffic accidents was similar for all three variants, although it was lowest overall for V.2. The similarity in predicted accident frequency for the three variants suggests that V.2 provides the greatest safety within the predefined constraints and parameter ranges explored in our study. These preliminary results suggest that the proposed model can optimize geometry, TE and TS of urban single-lane roundabouts.