基于 Petri 网的装备临抢修业务流程建模研究*

为了提高装备临抢修业务工作的科学性和准确性,论文利用Petri网建模的优势,将排队系统运用到装备临抢修业务流程建模研究中,利用库所优先级实现对故障装备按重要程度进行优先修理。论文讨论了将排队系统转化为HTCPN模型的建模规则,这种方法既可以给出简单直观的模型顶层结构,又可以根据实际情况对模型进行细化,并有利于对模型进行分析和仿真。最后利用CPN Tools工具对所建立的模型进行了性能分析,验证了模型的实用性和有效性。     

激光焊接夹层板结构设计程序开发

基于U-I型、U-IV型、V-I型、V-IV型4种夹层板结构形式,利用PCL(Patran Command Language)语言对MSC.Patran进行二次开发,设计开发出折叠式夹层板结构设计程序(FEA-LASCOR)。该程序仅需设计者在用户界面简单操作即能够实现夹层板板格快速建模、屈服强度分析、结果处理等功能。验算分析表明FEALASCOR程序具有与传统数值仿真分析一样的精度,并缩短了繁琐的建模工作,显著提高设计分析效率,为夹层板船体结构设计高效、快捷的分析工具。     

大型船舶推进轴系扭振特性仿真和试验

基于多体动力学耦合理论结合有限元理论,以1艘大型船舶为研究对象,建立其推进轴系的刚柔耦合多体动力学仿真模型,对大型低转速推进轴系在工作中的扭振特性进行研究。在仿真计算的基础上,利用扭振测试系统对实船的扭振进行测量,并从多个谐次将轴系扭振的仿真计算值与试验测量值进行对比和分析。分析结果表明,通过仿真计算得到的轴系扭转振动变化趋势与实际测量值基本相符,验证了仿真模型的正确性和可行性。同时,通过Adams/Virbration模块分析了船体变形对轴系扭振的影响,证明了船体变形会导致轴系扭转振动增大。     

一种螺旋桨参数化建模方法

对螺旋桨进行优化时,需要建立起优化计算的样本空间,即要实现初始桨的参数化建模。本文基于贝塞尔曲线拟合原理编程实现了螺旋桨的参数化建模,对螺旋桨的径向参数分布分别用一条贝塞尔曲线进行拟合,曲线的控制点通过遗传算法寻优求得。文中以4382桨为例,对其进行参数化建模,讨论了三、四、五、六阶贝塞尔曲线的拟合效果,发现三阶贝塞尔曲线拟合光顺性最好、拟合平均误差可以控制在0.3%以内,而且控制点个数较少,最适合拟合螺旋桨径向参数分布。最后通过调整三次贝塞尔曲线控制点的位置调整了原桨叶的几何形状,得到光顺性较好的新桨叶模型,表明该参数化建模方法合理。     

Within day rescheduling microsimulation combined with macrosimulated traffic

The concept of rescheduling is essential to activity-based modeling in order to calculate effects of both unexpected incidents and adaptation of individuals to traffic demand management measures. When collaboration between individuals is involved or timetable based public transportation modes are chosen, rescheduling becomes complex. This paper describes a new framework to investigate algorithms for rescheduling at a large scale. The framework allows to explicitly model the information flow between traffic information services and travelers. It combines macroscopic traffic assignment with microscopic simulation of agents adapting their schedules. Perception filtering is introduced to allow for traveler specific interpretation of perceived macroscopic data and for information going unnoticed; perception filters feed person specific short term predictions about the environment required for schedule adaptation. Individuals are assumed to maximize schedule utility. Initial agendas are created by the FEATHERS activity-based schedule generator for mutually independent individuals using an undisturbed loaded transportation network. The new framework allows both actor behavior and external phenomena to influence the transportation network state; individuals interpret the state changes via perception filtering and start adapting their schedules, again affecting the network via updated traffic demand. The first rescheduling mechanism that has been investigated uses marginal utility that monotonically decreases with activity duration and a monotonically converging relaxation algorithm to efficiently determine the new activity timing. The current framework implementation is aimed to support re-timing, re-location and activity re-sequencing; re-routing at the level of the individual however, requires microscopic travel simulation.     

(Unintended) Transport impacts of an energy-environment policy: The case of CNG conversion of vehicles in Dhaka

Motor vehicles are one of the major sources of air pollution in Dhaka, the capital of Bangladesh. The government took various policies to convert the petroleum vehicles on road to run on compressed natural gas (CNG), which allows both air quality improvements and energy security benefits. One of the market friendly policies to encourage the fuel switch was to increase the price differential between CNG and petrol and diesel. This has allowed a wide-scale adoption of CNG as the fuel of choice. However, several years into the policy, there is now a widespread belief among the policymakers that the CNG conversion may have increased car ownership and car travel due to their lower running costs, resulting in more congestion and a reversal of the strategy is on the cards. It is therefore important to test the hypothesis whether CNG conversion had genuinely increased car ownership and car travel in Dhaka city. This paper presents the results of a questionnaire survey and an econometric intervention analysis to understand the impact of CNG conversion on car ownership and car travel in Dhaka. Attention is also given to disentangle the self-selection and price-induced travel effects of CNG conversion. Results show that ownership did not increase, but travel of on-road vehicles increased due to the CNG policy. However, additional congestion costs are still around one half of the health benefits brought about by the policy.     

Privacy protection method for fine-grained urban traffic modeling using mobile sensors

With the ubiquitous nature of mobile sensing technologies, privacy issues are becoming increasingly important, and need to be carefully addressed. Data needs for transportation modeling and privacy protection should be deliberately balanced for different applications. This paper focuses on developing privacy mechanisms that would simultaneously satisfy privacy protection and data needs for fine-grained urban traffic modeling applications using mobile sensors. To accomplish this, a virtual trip lines (VTLs) zone-based system and related filtering approaches are developed. Traffic-knowledge-based adversary models are proposed and tested to evaluate the effectiveness of such a privacy protection system by making privacy attacks. The results show that in addition to ensuring an acceptable level of privacy, the released datasets from the privacy-enhancing system can also be applied to urban traffic modeling with satisfactory results. Albeit application-specific, such a “Privacy-by-Design” approach would hopefully shed some light on other transportation applications using mobile sensors.     

装载机连杆机构优化设计

结合传统设计方法和现代优化方法有效地解决了原设计中装载机不能满足平移性和自动放平性的问题;在用作图法确定铰接点大致位置的基础上,建立了连杆机构参数化模型,并对模型进行了优化研究。结果表明:新机构能满足平移性和自动放平性要求。该方法对类似的机构优化问题有一定的参考价值。     

基于Cruise自卸车动力经济性仿真分析与优化

动力性、经济性是评价车辆性能的重要指标,也是产品开发过程中需要重点考虑的内容。针对某款重卡车的动力性、经济性,利用AVL的计算分析软件Cruise进行仿真分析,并将计算结果与实验结果进行对比,结果吻合较好。在此模型基础上,对拓展车型的多种匹配方案进行优化分析计算,并确定最佳方案。     

基于齿轮非线性动力学的变速器异响分析

从非线性动力学的角度对某变速器齿轮异响故障进行分析,针对异响的表现特征对单对齿轮副间隙非线性振动问题进行研究,从影响齿轮非线性动力响应特征的激励频率、载荷比、阻尼比等参数出发分析系统稳定的条件,并根据分析所得的结论对变速器异响问题的改进提出建议。