流线型钢箱梁涡激振动机理与气动控制措施

以某主跨390 m的独塔流线型钢箱梁斜拉桥为工程依托，采用风洞试验与计算流体动力学（Computational Fluid Dynamics，CFD）相结合的方法对流线型钢箱梁涡激振动机理与气动控制措施进行研究。首先，采用几何缩尺比为1∶30的主梁节段模型进行主梁涡振性能与气动控制措施优化研究；其次，采用CFD方法对主梁涡振响应进行流固耦合计算，将Newmark-β算法嵌入ANSYS Fluent用户自定义函数（User Defined Functions，UDFs）实现主梁结构振动响应求解，同时结合动网格技术实现主梁断面流固耦合分析；并根据判断条件来检索箱梁壁面上的网格单元，以获得主梁断面振动过程中的表面压力，然后结合主梁结构振动响应、表面压力以及流场特征等对主梁涡激振动机理进行分析。结果表明：该桥主梁原设计方案存在涡激共振现象，将梁底检修车轨道内移120 cm可有效抑制主梁涡振响应；主梁涡激振动响应的数值模拟结果与风洞试验结果吻合较好；检修车轨道内移120 cm后主要改变了箱梁下表面平均压力系数分布特性，且箱梁表面各测点脉动压力卓越频率不一致，有效减小了主梁涡激振动响应；流线型箱梁靠近迎风侧的“被动区域”对结构涡振响应贡献较小，背风侧“驱动区域”发生周期性旋涡脱落是影响流线型箱梁涡振的主要因素。     

The impact of land-use mix on residents' travel energy consumption: New evidence from Beijing

Policies that encourage mixed land use are widely believed to make transport more energy efficient. However, few studies have directly examined the impacts of land-use heterogeneity on travel energy consumption at the individual level. Moreover, the definition and measures of land-use heterogeneity are debated. This paper aims to fill these gaps using the large city of Beijing, China, as a case study. Three types of land use are examined in terms of their effects on individual residents’ travel energy consumption. The results suggest that high land-use diversity and a good jobs-housing balance significantly reduces commuting travel. Interestingly, highly heterogeneous retail and housing areas may have high travel energy use, as residents are more likely to go shopping. There are obvious spatial variations in these effects. Residents of suburban ‘newtowns’, where the jobs-housing balance is particularly good, consume less travel energy. The results suggest that decreased use of conventional planning patterns, such as the socialist danwei system, and increasing urban sprawl, bring new challenges to achieving transport efficiency. Mixed land-use policies can be an effective solution to these challenges.     

钢檩条设计中的若干问题

轻型屋面钢檩条的竖向荷载、整体稳定性计算以及檩条与屋面梁、屋架的连接构造是设计的重要环节,本文结合规范和国家标准设计图的编制提出若干问题,供参考.     

高墩连续刚构左右幅相连横向抗风分析

高墩大跨径连续刚构桥梁主墩横向抗风设计问题突出,多以增大主墩底部尺寸来解决,但变截面高墩容易造成施工不便和影响美观。对分幅桥梁,笔者认为可将左右幅0#块用外伸横隔板相连,双幅桥梁的主墩共同承担横向风荷载。以龙门大桥为例,用Midas建立单幅桥梁和双幅相连桥梁的两个模型,比较各自的内力和稳定性,再应用ANSYS对受力复杂的0#块及其外伸隔板作三维实体仿真分析。结果表明,双幅桥梁相连后可有效减少墩底内力,提高整体稳定性。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

柴油发动机掺烧生物柴油的经济性研究

为了更好地评价柴油机燃用生物柴油的经济性,分析了生物柴油和0#石化柴油的理化性质,分别对生物柴油的体积分数为0.2,0.5,1的B20、B50、B100 3种燃料和0#柴油在495Q3柴油机上进行了试验。试验结果显示燃用3种燃料的燃油消耗率比0#柴油在中小负荷时平均增加5.30%,9.65%,19.04%,大负荷时平均增加2.86%,4.75%,9.64%;能量等值折合油耗率在中小负荷时平均增加2.65%,2.63%,5.74%,大负荷时平均降低0.26%,1.97%,4.80%。     

Er~(3+)及Er~(3+)/Yb~(3+)掺杂YBa_3B_9O_(18)材料的发光性能

通过高温固相烧结法制备了Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉.X射线衍射结果表明,Er3+/Yb3+的掺杂并没有改变基质的六方结构.应用325 nm激光激发Er3+掺杂YBa3B9O18,观察到了Er3+离子的特征发射峰,证明了Er3+离子与基质间的能量传递.应用980 nm激光分别激发Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉,观测到了Er3+离子的上转换过程,该过程可通过能级图进行解释.实验结果表明Yb3+对Er3+的上转换发光有敏化作用.     

机动车交通流比功率与能耗模型研究

为研究机动车交通流能耗,将机动车交通流比功率(VSP)作为研究对象.从最常见的单车比功率研究出发,使用气体动力学交通流模型联系单车比功率与交通流整体比功率,以此建立交通流比功率模型.为使此模型具备更显著的物理意义,将交通流比功率分为两部分,一部分为平衡交通流状态下的比功率,另一部分为偏离平衡交通流状态导致的比功率变化量,模型中的交通流参数与变量能够通过现有的交通流探测设备获取.将比功率理论模型从单车扩展到了交通流,用数学公式反应了交通流状态与比功率的关系,并且证明了交通流比功率能够通过交通流参数进行估计.并由交通流比功率出发,推导出交通流比功公式.此外研究了平衡态交通流比功率及比功与密度的关系.为研究机动车交通流能耗探索了新的思路.     

船舶电力系统暂态稳定性的混合分析法

针对大型船舶电力系统的特点及其日益突出的暂态稳定性问题,开展了适用于船舶电力系统的方法研究。结合船舶电网拓扑结构自身特点,建立了适用于大扰动下暂态稳定分析的船舶柴油发电机组的动态等值模型、推进电机及其螺旋桨四象限工作特性等值模型。以船舶电网轴线为界,将系统等效成两机模型进行时域仿真分析,在此基础上建立系统能量函数,提出了一种适用于船舶电力系统的暂态稳定性混合分析法。该方法即可定量描述系统暂态稳定性及其稳定裕度,又可直观地在线监测系统各状态变量的动态过程。最后通过仿真算例验证了新方法的正确性和有效性。     

一种适用于虚拟惯量优化控制研究的风电场等值建模方法

大型风电场的建模分析是研究风电参与电力系统频率调控的前提。风电场内机组众多且运行方式各异,根据风电机组的整体结构及虚拟惯量控制策略的基本原理,在直驱式风电机组单机详细模型的基础上进行简化,然后按典型风速将风电场内全部机组分为三群,同群机组采用聚合方法得到等值机组,从而形成最终的风电场多机并网等值模型。考虑风速扰动和负荷扰动两种情况,通过Matlab/Simulink软件对比校验所建模型,仿真结果显示了该建模方法的有效性。