管道惯性测绘系统研制及应用

针对管道中心线地理坐标信息的测量需求,基于惯性导航原理,研制了以管道内检测器为载体的管道中心线测绘内检测设备,并将其与漏磁内检测器结合进行工程应用。选取了5处已知点对测绘结果进行了验证,测绘结果和实际验证结果表明:研制的惯性导航内检测器能够准确测绘管道中心线轨迹坐标,在校验点间距约为2 km时,5个距校验点约1 km的已知点的平均测绘误差约为1.8 m;通过将惯性导航检测器与漏磁检测器的组合使用,可有效获取管道缺陷的地理坐标信息,提高了管道内检测缺陷检测定位的精度。     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

Mode jumping in the lateral buckling of subsea pipelines

Unburied subsea pipelines under high-temperature conditions tend to relieve their axial compressive stress by forming localised lateral buckles. This phenomenon is traditionally studied under the assumption of a specific lateral deflection profile (mode) consisting of a fixed number of lobes. We study lateral thermal buckling as a genuinely localised buckling phenomenon by applying homoclinic (‘flat’) boundary conditions. By not having to assume a particular buckling mode we are in a position to study transitions between these traditional modes in typical loading sequences. For the lateral resistance we take a realistic nonlinear pipe-soil interaction model for partially embedded pipelines. We find that for soils with appreciable breakout resistance, i.e., nonmonotonicity of the lateral resistance characteristic, sudden jumps between modes may occur. We consider both symmetric and antisymmetric solutions. The latter turn out to require much higher temperature differences between pipe and environment for the jumps to be induced. We carry out a parameter study on the effect of various pipe-soil interaction parameters on this mode jumping. Away from the jumps post-buckling solutions are reasonably well described by the traditional modes whose analytical expressions may be used during preliminary design.     

Heterogeneous hazard model of PEV users charging intervals: Analysis of four year charging transactions data

Public charging infrastructure represents a key success factor in the promotion of plug-in electric vehicles (PEV). Given that a large initial investment is required for the widespread adoption of PEV, many studies have addressed the location choice problem for charging infrastructure using a priori simple assumptions. Ideally, however, identifying optimal locations of charging stations necessitates an understanding of charging behavior. Limited market penetration of PEV makes it difficult to grasp any regularities in charging behavior. Using a Dutch data set about four-years of charging transactions, this study presents a detailed analysis of inter-charging times. Recognizing that PEV users may exhibit different charging behavior, this study estimates a latent class hazard duration model, which accommodates duration dependence, unobserved heterogeneity and the effects of time-varying covariates. PEV users are endogenously classified into regular and random users by treating charging regularity as a latent variable. The paper provides valuable insights into the dynamics of charging behavior at public charging stations, and which strategies can be successfully used to improve the performance of public charging infrastructure.     

Predicting market potential and environmental benefits of deploying electric taxis in Nanjing,China

This paper investigates the market potential and environmental benefits of replacing internal combustion engine (ICE) vehicles with battery electric vehicles (BEVs) in the taxi fleet in Nanjing, China. Vehicle trajectory data collected by onboard global positioning system (GPS) units are used to study the travel patterns of taxis. The impacts of charger power, charging infrastructure coverage, and taxi apps on the feasibility of electric taxis are quantified, considering taxi drivers’ recharging behavior and operating activities. It is found that (1) depending on the charger power and coverage, 19% (with AC Level 2 chargers and 20% charger network coverage) to 56% (with DC chargers and 100% charger network coverage) of the ICE vehicles can be replaced by electric taxis without driving pattern changes; (2) by using taxi apps to find nearby passengers and charging stations, drivers could utilize the empty cruising time to charge the battery, which may increase the acceptance of BEVs by up to 82.6% compared to the scenario without taxi apps; and (3) tailpipe emissions in urban areas could be significantly reduced with taxi electrification: a mixed taxi fleet with 46% compressed-natural-gas-powered (CNG) and 54% electricity-powered vehicles can reduce the tailpipe emissions by 48% in comparison with the fleet of 100% CNG taxis.     

探地雷达在桥梁预应力管道定位检测中的应用

对预应力管道进行定位检测,是目前桥梁无损检测技术的一个重要问题,在阐述探地雷达无损检测技术原理和方法的基础上,通过室内模型试验,并结合工程实例说明了高精度探地雷达在桥梁预应力管道定位检测中的应用,及其无损、简易、效率高、精度高、抗干扰能力强的优点,为准确评价桥梁结构耐久性和安全使用功能提供科学依据。     

基于小波和粒子群算法的HEV行驶状况辨识方法研究

针对混合动力汽车(HEV)行驶状况(道路坡度和整车载荷)变化难以有效识别,导致驱动系统控制策略不能有效满足驾驶员意图问题,以混联式HEV为研究对象,提出了基于小波滤波和粒子群算法的HEV行驶状况辨识方法。首先建立了汽车行驶状况辨识模型,采用最小二乘法确立了优化目标函数,其次研究了基于小波滤波和粒子群算法的HEV行驶状况辨识原理,最后进行了行驶状况粒子群智能算法辨识试验。在采集实车数据的基础上,对实车数据进行小波滤波,并运用行驶状况辨识方法对道路坡度和整车载荷进行了辨识,并对辨识结果进行小波滤波,结果表明,试验工况下整车载荷辨识的相对误差绝对平均值为2.71%,道路坡度辨识的相对误差绝对平均值为3.85%,验证了所提出方法的有效性。     

隧道管棚超前支护施工技术

根据西直沟1#隧道实际工程特点,选取管棚超前支护技术。依据管棚支护的主要机理以及地形地质和荷载情况,采用扇形管棚布置。根据埋深较大时的简化泰沙基公式计算围岩最大压力,并选取管棚参数,对本隧道的施工提供了理论依据,为以后黄土隧道的施工积累了工程实际经验。     

基于名义应力法的动车组车体净水箱吊装部件疲劳强度分析

针对高速运行动车组车体悬挂设备振动疲劳损伤问题,以某型动车组车顶净水箱吊装结构为研究对象,采用名义应力法对吊装结构的焊缝部位进行疲劳强度评估.根据EN 12663标准确定净水箱的工作载荷工况,采用有限元法计算了各工况下结构的振动响应,并基于BS标准计算了焊缝疲劳评估点的寿命.假定各载荷工况出现频率相同的情况下,构造了工作载荷历程,采用Fe-safe软件对焊缝的疲劳寿命进行了仿真分析.两种方法分析结果均表明:焊缝1与焊缝2寿命最低,是结构最易发生疲劳破坏的位置;焊缝位于筋板表面的焊趾寿命低于位于主支撑板表面的焊趾寿命.     

冰区航行船舶电力推进轴系机电耦合的扭振分析

通过螺旋桨桨叶与冰块的相互作用过程,建立单冰块对螺旋桨扭转振动的激励函数;同时建立机电耦合振动数学模型,推导得到机电耦联动力学方程,研究电机电磁激励力对扭转振动的影响。以3500吨科考船电力推进轴系为研究对象,基于冰载荷激励力和电磁激励力对轴系扭转振动进行分析,为复杂的船舶电力推进轴系在冰区航行时的振动研究奠定了基础。