港口散粮工程电气系统的特点及应注意的问题

结合大连港大窑湾码头已建成的2个散粮专用泊位在电气系统设计和施工中出现的问题,对港口散粮工程电气系统的特点及应注意的问题作一阐述。     

纯电动汽车能量回收控制策略研究

纯电动汽车的能量回收技术有很高的研究价值,是提高整车经济性的有效手段之一。以一种并联能量回收方案为研究对象,从再生制动原理进行分析,在电池回收能力、电机回收能力及负载功率消耗的限制前提下,提出一个合理的能量回收控制策略,兼顾整车的经济性及乘客的舒适性,并通过ADVISOR进行NEDC工况仿真验证。试验表明,与无能量回收车型对比,相同时间内该策略下整车电池SOC值明显下降缓慢,该研究为制动能量回收策略算法的进一步优化开发提供参照。     

移相全桥ZVS控制的电动汽车DC/DC转换器设计研究

本文采用移相全桥控制策略,设计了一种应用于电动汽车的DC/DC变换器并能实现功率开关的零电压导通.本文对其进行了简要介绍移相全桥ZVS-DC变换器的拓扑结构.制造了一个原型进行了一系列的实验.最终的实验结果与仿真结果相一致,且满足要求设计要求,证明设计方案的可行性.     

基于LabVIEW和PXI的电力机车电气综合性能测试系统

介绍了电力机车电气综合性能测试平台的基本组成,从硬件平台、软件设计等方面详细分析了基于LabVIEW和PXI的电力机车电气综合性能测试系统的开发应用。     

地铁通风小系统风机送电调试的探讨

通过6个案例分析,从不同调试故障的处理方法,归纳出3类常见调试问题,进而提出分3步进行的送电调试,为快速、高效地完成通风小系统风机送电调试任务提供了一条可行的便利途径。     

宝马车系诊断设备及电控发动机的重点组成部件

介绍宝马发动机电控系统诊断信息、车间诊断设备、电控发动机的重点组成部件。     

A model-based traction control strategy non-reliant on wheel slip information

A traction control system (TCS) for two-wheel-drive vehicles can conveniently be realised by means of slip control. Such a TCS is modified in this paper in order to be applicable to four-wheel-drive vehicles and anti-lock braking systems, where slip information is not readily available. A reference vehicle model is used to estimate the vehicle velocity. The reference model is excited by a saw-tooth signal in order to adapt the slip for maximum tyre traction performance. The model-based TCS is made robust to vehicle modelling errors by extending it with (i) a superimposed loop of tyre static curve gradient control or (ii) a robust switching controller based on a bi-directional saw-tooth excitation signal. The proposed traction control strategies are verified by experiments and computer simulations.     

Multivariable speed synchronisation for a parallel hybrid electric vehicle drivetrain

In this article, a new drivetrain configuration of a parallel hybrid electric vehicle is considered and a novel model-based control design strategy is given. In particular, the control design covers the speed synchronisation task during a restart of the internal combustion engine. The proposed multivariable synchronisation strategy is based on feedforward and decoupled feedback controllers. The performance and the robustness properties of the closed-loop system are illustrated by nonlinear simulation results.     

Fault classification method for the driving safety of electrified vehicles

A fault classification method is proposed which has been applied to an electric vehicle. Potential faults in the different subsystems that can affect the vehicle directional stability were collected in a failure mode and effect analysis. Similar driveline faults were grouped together if they resembled each other with respect to their influence on the vehicle dynamic behaviour. The faults were physically modelled in a simulation environment before they were induced in a detailed vehicle model under normal driving conditions. A special focus was placed on faults in the driveline of electric vehicles employing in-wheel motors of the permanent magnet type. Several failures caused by mechanical and other faults were analysed as well. The fault classification method consists of a controllability ranking developed according to the functional safety standard ISO 26262. The controllability of a fault was determined with three parameters covering the influence of the longitudinal, lateral and yaw motion of the vehicle. The simulation results were analysed and the faults were classified according to their controllability using the proposed method. It was shown that the controllability decreased specifically with increasing lateral acceleration and increasing speed. The results for the electric driveline faults show that this trend cannot be generalised for all the faults, as the controllability deteriorated for some faults during manoeuvres with low lateral acceleration and low speed. The proposed method is generic and can be applied to various other types of road vehicles and faults.     

船舶电气安装工艺分析

文章结合在造项目船的作业情况,对船舶电气舾装件的安装、电缆敷设的工艺应用等进行了分析研究,并提出优化建议,以提高电装生产效率.