大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

提高八钢专用铁路货运量的对策

优化调整货物运输结构、提高铁路发运占比是落实"蓝天保卫战"的一项具体举措。为了满足宝钢集团新疆八一钢铁有限公司生产规模的不断扩大、外运需求旺盛的实际,在对其铁路运输现状和需求,以及存在的线路质量较差、装卸效率较低、运输组织衔接弱等问题进行剖析的基础上,提出提高铁路货运量对策,即:推进路企直通战略合作、升级改造设备设施、构建调度全程统一指挥模式、优化货流源头组织,以加快调整运输结构,增加铁路货运量,推动铁路高质量发展。     

How the environmental impact affects the design of logistics networks based on cost minimization

The degree of centralization of the logistics network is one of the important strategic decisions to take. This issue has often been studied but mainly from a cost minimization focus. This research studies the influence of incorporating the environmental impact in logistics network design models, comparing the results with those obtained considering cost minimization only. A fuzzy biobjective optimization model is used to carry out a number of experiments. By weighting the relative importance of the two objectives, the differences with respect to the base cost minimization solution can be ascertained. Our results show that in general more material is moved through warehouses when the environmental impact is considered and more decentralized facilities are opened.     

大城市中小学周边地区交通拥堵问题分析与解决策略

交通拥堵已经成为我国大城市的一种社会问题,它与每一个人都息息相关,如何更好地处理这种问题,使其减少对人们出行的影响,成为值得每一个人思考的问题。针对大中型城市中的交通拥堵其中的一种现象进行深入的剖析,系统介绍交通拥堵的成因,有针对性地提出如何改善中小学周边地区交通拥堵现象的一些观点和做法。     

浅谈沿海航行船舶应急演练存在的问题与改进措施

在日常船舶安全检查中,发现应急训练与演习存在一些问题,这些问题影响了船员应急反应能力的提升,带来了船舶安全隐患。根据国内航行货船应急训练与演习的要求,提出改进建议,旨在提高船员对应急训练与演习的认识,加强日常训练与演习,不断提升应急反应能力,以保障船舶和船员生命安全。     

Validation of an extended discrete first-order model with variable speed limits

This paper validates the prediction model embedded in a model predictive controller (MPC) of variable speed limits (VSLs). The MPC controller was designed based on an extended discrete first-order model with a triangular fundamental diagram. In our previous work, the extended discrete first-order model was designed to reproduce the capacity drop and the propagation of jam waves, and it was validated with reasonable accuracy without the presence of VSLs. As VSLs influence traffic dynamics, the dynamics including VSLs needs to be validated, before it can be applied as a prediction model in MPC. For conceptual illustrations, we use two synthetic examples to show how the model reproduces the key mechanisms of VSLs that are applied by existing VSL control approaches. Furthermore, the model is calibrated by use of real traffic data from Dutch freeway A12, where the field test of a speed limit control algorithm (SPECIALIST) was conducted. In the calibration, the original model is extended by using a quadrangular fundamental diagram which keeps the linear feature of the model and represents traffic states at the under-critical branch more accurately. The resulting model is validated using various traffic data sets. The accuracy of the model is compared with a second-order traffic flow model. The performance of two models is comparable: both models reproduce accurate results matching with real data. Flow errors of the calibration and validation are around 10%. The extended discrete first-order model-based MPC controller has been demonstrated to resolve freeway jam waves efficiently by synthetic cases. It has a higher computation speed comparing to the second-order model-based MPC.     

桥涵桥头跳车的原因及处理对策

桥涵桥头跳车现象对行驶过程的平稳舒适性造成影响,导致车辆减速,会造成人员的心理和身体上的压力,影响驾驶人员的行车操作,严重时甚至可能会造成交通事故。     

Distributed MPC for cooperative highway driving and energy-economy validation via microscopic simulations

Traffic congestion and energy issues have set a high bar for current ground transportation systems. With advances in vehicular communication technologies, collaborations of connected vehicles have becoming a fundamental block to build automated highway transportation systems of high efficiency. This paper presents a distributed optimal control scheme that takes into account macroscopic traffic management and microscopic vehicle dynamics to achieve efficiently cooperative highway driving. Critical traffic information beyond the scope of human perception is obtained from connected vehicles downstream to establish necessary traffic management mitigating congestion. With backpropagating traffic management advice, a connected vehicle having an adjustment intention exchanges control-oriented information with immediately connected neighbors to establish potential cooperation consensus, and to generate cooperative control actions. To achieve this goal, a distributed model predictive control (DMPC) scheme is developed accounting for driving safety and efficiency. By coupling the states of collaborators in the optimization index, connected vehicles achieve fundamental highway maneuvers cooperatively and optimally. The performance of the distributed control scheme and the energy-saving potential of conducting such cooperation are tested in a mixed highway traffic environment by the means of microscopic simulations.     

广西交通科技资源共享平台建设探讨

文章针对广西交通科技项目管理系统现状,分析了建设交通科技资源共享平台的必要性,阐述了交通科技资源共享平台建设的关键技术、创新点及主要内容,指出该共享平台的建设可改善和提高交通运输科技项目质量及监管水平。     

Integrated vehicle and powertrain optimization for passenger vehicles with vehicle-infrastructure communication

This research proposes an optimal controller to improve fuel efficiency for a vehicle equipped with automatic transmission traveling on rolling terrain without the presence of a close preceding vehicle. Vehicle acceleration and transmission gear position are optimized simultaneously to achieve a better fuel efficiency. This research leverages the emerging Connected Vehicle technology and utilizes present and future information—such as real-time dynamic speed limit, vehicle speed, location and road topography—as optimization input. The optimal control is obtained using the Relaxed Pontryagin’s Minimum Principle. The benefit of the proposed optimal controller is significant compared to the regular cruise control and other eco-drive systems. It varies with the hill length, grade, and the number of available gear positions. It ranges from an increased fuel saving of 18–28% for vehicles with four-speed transmission and 25–45% for vehicles with six-speed transmission. The computational time for the optimization is 1.0–2.1 s for the four-speed vehicle and 1.8–3.9 s for the six-speed vehicle, given a 50 s optimization time horizon and 0.1 s time step. The proposed controller can potentially be used in real-time.