基于直接CAA与SEA的汽车风噪预测与控制

本文中对某一SUV风噪的预测与控制进行研究.首先基于风洞测试进行风噪声源特性与传递路径的分析,发现泄漏噪声主要发生在500 Hz以上中高频段,车底风噪主要集中于800 Hz以下中低频段,而在外形噪声中,由车顶和四门传递的风噪的贡献大于翼子板.然后基于气动噪声直接计算法和统计能量分析对外形噪声进行仿真,并结合风洞测试分析...     

Phase change analysis of an underwater glider propelled by the ocean's thermal energy

The phase change characteristic of the power source of an underwater glider propelled by the ocean's thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process,but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees,the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change,and the slope of the temperature time history curve remains the same. However,the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size,boundary conditions,and the power source's cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38mm needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.     

蜂窝式夹芯层结构横向耐撞性能数值仿真研究

蜂窝式夹层板结构具有强度高、结构轻等优越的性能,其中夹芯层结构起关键作用。文中采用非线性有限元软件MSC/Dytran模拟仿真了蜂窝式夹芯层结构在横向冲击载荷作用下的渐进屈曲过程,分析了结构的耐撞性能,结构参数对耐撞性能的影响。研究分析表明:蜂窝式夹芯层结构在横向冲击载荷作用下具有稳定的压溃载荷、较长的有效行程,具有优良的吸能特性。结构密度是影响结构耐撞性能的关键因素;夹芯层高度对结构的耐撞性影响不大,增加结构夹芯层高度结构吸能增加。     

对ANN技术表达船体曲线算法的改进

应用人工神经元网络（ANN）技术表达船体曲线。根据问题性质,选用小波基作为前向单层神经网络的神经元激励函数,结合逐层学习（OHLO）算法对一艘3．6万吨散货船的后半体进行了表达。编程运算结果表明,该方法速度较传统的BP算法有较大提高。     

Can ports increase traffic while reducing inputs? Technical efficiency of Spanish Port Authorities using a directional distance function approach

The focus of this paper is on the productive efficiency of ports. We estimate a directional technology distance function using parametric techniques to analyze the production technology and technical efficiency of a set of Spanish Port Authorities observed over the period 1993–2012. Technical inefficiency is conceived as the ability of ports to simultaneously expand a given output and contract variable inputs while maintaining quasi-fixed inputs and other outputs constant. Thus, for containerized cargo we address the following question: Given the amount of quasi-fixed inputs used by the firm and given the volume of the other outputs (liquids, solids, non-containerized cargo and passenger traffic), could ports increase their containerized merchandise while simultaneously reducing their variable inputs? Similar questions are asked for solid bulk and non-containerized general cargo. Our results show evidence of technical inefficiency among the ports in our sample. In particular, if the ports operated efficiently, we find that containerized cargo could be expanded by an average of over 6.4%, with an equivalent reduction in variable inputs. Solid bulk cargo and general non-containerized cargo could be increased by 4.1% and 6.1% respectively, with corresponding reductions in variable inputs. An implication of our results is that there is ample scope for specialization on the part of ports with no increase in infrastructure costs. Given that large investments in infrastructure have been made in Spanish port over the last decade, this opens the possibility of moving towards a management model based on taking advantage of existing capacity rather than new investments.     

LNG卸料臂与船对接法兰面泄漏分析

LNG卸料臂是LNG卸载过程中最重要的设备之一,而卸载过程中卸料臂与船对接法兰面最易发生泄漏,因此避免其泄漏很重要。文中以某LNG接收站为例,简要介绍卸料臂预冷流程;对曾经发生过的泄漏展开分析,结果发现预冷速度过快是造成对接法兰面泄漏的主要原因;提出了相应的改进措施。改进之后,此LNG接收站卸船期间再未出现卸料臂与船对接法兰面泄漏的问题。     

照明长度和亮度随车速变化的隧道照明智能控制系统研究

随着我国交通运输业日益发达,越来越多的公路隧道投入运营,其安全性和运营成本之间的矛盾也越来越受到关注,如何在保证隧道运营安全的前提下,尽可能的降低运营成本成为亟待解决的难题。本文从隧道照明安全节能的角度出发,提出一种根据车速改变加强照明区段长度的隧道照明控制系统,满足照明质量的同时进行隧道的"按需照明"。系统将车速信息分为50 km/h以下、50~70 km/h、70~90 km/h、90 km/h以上四个速度区段,每个速度区段设计不同的加强照明区段长度;通过电感式线圈检测进入隧道的车辆速度作为控制输入参数,控制相应区段进行照明。     

水泥稳定砂砾就地冷再生工艺及其节能环保意义

道路损坏后路基和路面材料的再生利用不仅能够节约大量宝贵的筑路材料,而且具有重要的环境保护意义。采用冷再生技术将原有旧路面材料以专用机械作业方式进行就地再生,并将其作为水泥稳定砂砾摊铺在原有道路上并作为新铺道路的基础是实现上述理念的成功尝试。     

新机遇下我国新能源汽车换电模式发展前景分析

换电模式是一种新能源汽车快速补电方式,具有补电速度快、自动化水平高、集成度高等优点,可大大降低消费者里程焦虑。还可实现“车电分离”销售,解决消费者购车成本高的难题。由于受到换电标准不统一、换电车型少等因素限制,新能源汽车换电模式发展较为缓慢。随着财政补贴退坡,换电模式重新引起政府部门和行业企业重视。文章重点研究了换电模式技术路线、应用现状和技术优势,分析了新的机遇下换电模式的发展空间和市场前景。     

纯电动物流车用PMSM降开关损耗控制

物流车是城市内部运送货物的重要交通工具,具有运行距离短、启停频率高、运行时间长的特点。城市内部物流车都逐步采用纯电动物流车代替传统的燃油车。针对物流车运行特点,文章对电动物流车电机控制算法进行优化,在考虑不同工况下使用不同的开关频率,降低开关损耗,减少控制器发热。通过对降低开关损耗控制方法与传统控制方法在不同车辆运行工况下对比,电机控制器发热均有所降低,同时电机控制器效率有所增加。