公路隧道工程的环境问题及其对策研究

环保是21世纪最大的课题,而在公路隧道建设中,仍存在很大的问题,本文以公路隧道洞口设计为重点,提出采用绿色洞口、棚洞这两种新型环保的洞门设计,介绍了其施工的工序,最后就隧道洞门设计现阶段存在的问题展开讨论,并提出应对措施。     

武汉光谷国际网球中心与三环线衔接匝道研究

介绍了武汉市三环线武黄立交新增匝道的设计思路、方案调整及匝道车道数研究。通过分析新增匝道建设的主要受控因素,提出了三环线到达及驶离网球中心停车场不同路径的匝道方案,并从多方面对匝道方案进行综合比选。     

隆林新洲养护站边坡稳定性分析

文章利用SLOPE／W模块,基于确定值方法和可靠度理论的极限平衡法．对隆林新洲养护站边坡在不采取支挡措施和采用锚索抗滑桩支挡措施情况下,如何保持边坡稳定性进行了对比分析。     

轴对称解对隧道衬砌水压力计算的适用性研究

文章根据渗流理论推导了隧道衬砌水压力的轴对称解,并利用数值分析方法研究了轴对称解对不同形状隧道断面与浅埋隧道的适用性.研究结果表明:轴对称解适用于非圆形隧道断面衬砌水压力的估算;隧道断面形状对衬砌水压力折减系数的影响较小,可以忽略不计,其影响大小主要由衬砌与围岩的渗透系数比值决定.对于浅埋低水头隧道,用轴对称解计算的毛洞流量Qm与数值解比较,其误差较大,最大误差为36.5％;但用来计算衬砌水压力p1以及衬砌后水流量Q1时,误差相对较小,最大误差为6.3％,特别是利用轴对称解得出的衬砌水压力值与利用数值解得出的衬砌水压力特征值最大误差仅为3.4％.     

Predictive power of inspection outcomes for future shipping accidents – an empirical appraisal with special attention for human factor aspects

This paper investigates whether deficiencies detected during port state control (PSC) inspections have predictive power for future accident risk, in addition to other vessel-specific risk factors like ship type, age, size, flag, and owner. The empirical analysis links accidents to past inspection outcomes and is based on data from all around the globe of PSC regimes using harmonized deficiency codes. These codes are aggregated into eight groups related to human factor aspects like crew qualifications, working and living conditions, and fatigue and safety management. This information is integrated by principal components into a single overall deficiency index, which is related to future accident risk by means of logit models. The factor by which accident risk increases for vessels with above average compared to below average deficiency scores is about 6 for total loss, 2 for very serious, 1.5 for serious, and 1.3 for less-serious accidents. Relations between deficiency scores and accident risk are presented in graphical format. The results may be of interest to PSC authorities for targeting inspection areas, to maritime administrations for improving asset allocation based on prediction scenarios connected with vessel traffic data, and to maritime insurers for refining their premium strategies.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

自升式风电安装平台插桩过程中的耦合作用

以某自升式风电安装平台和其临近的固定平台为研究对象,探讨风电安装平台桩靴入泥带来的挤土荷载与环境荷载的耦合作用对平台桩基强度的影响。分析结果表明:在靠近泥面一定范围之内,在进行导管架钢桩设计时必须考虑挤土荷载与环境荷载的耦合作用,以满足导管架平台桩基的强度要求。     

斜向波浪对斜坡堤胸墙作用力的试验研究

斜坡堤胸墙的稳定性主要受到波浪作用的影响,而且实际工程中斜坡堤多受斜向波浪作用。通过斜向与正向不规则波对斜坡堤胸墙作用的物理模型试验研究,分析斜坡堤单个胸墙所受的斜向波浪总力的折减系数随水位和波浪入射角度的变化规律,并与斜向波浪对单元直立堤的作用情况进行对比。结果表明:斜坡堤单个胸墙所受的斜向波浪总力的折减系数总体上随着水位的降低而变小,随着波浪入射角度的减小而变小;斜向波浪总浮托力的折减系数一般小于总水平力的折减系数;在不同水位和波浪入射角下,斜坡堤单个胸墙所受的斜向波浪总力的折减系数与单元直立堤有一定差别。     

散杂码头设计中节能增效措施的应用

针对码头工程中如何多方位将节能增效措施融入到设计中的问题,以长江江苏段某散杂码头及其堆场的设计为例,在工艺、结构、电气等方面采用多方位比较的方法,工艺采用装船机、取料机和皮带机变频联动系统、旋转式过渡皮带车以及三工位头部伸缩装置等措施,结构方面陆域轨道基础采用新型专利,电气方面采用风光互补路灯及岸电系统等不同的节能增效措施,使项目更经济合理、效益显著。