SWD6LTM410C船用柴油机拉缸故障的分析与排除

文章结合SWD6LTM410C船用柴油机,阐述了拉缸的现象、产生的机理及可能的原因,提出了故障排除的方法,并针对类似故障在柴油机日常维护管理中应注意的问题进行总结。     

基于时间累计法的机车维修性预计分析

基于时间累积法,阐述机车维修性预计工作流程以及系统与LRU平均修复时间的计算方法。并以空调与通风系统为例,说明了系统及LRU平均修复时间的计算过程,并由此得出整车的平均修复时间。文章最后阐述了维修性预计对机车设计的指导作用以及使用时间累积法的局限性。     

Adhesion estimation at the wheel–rail interface using advanced model-based filtering

The railway industry in the UK is currently expanding the use of condition monitoring of railway vehicles. These systems can be used to improve maintenance procedures or could potentially be used to monitor current vehicle running conditions without the use of cost prohibitive sensors. This paper looks at a novel method for the online detection of areas of low adhesion in the wheel/rail contact that cause significant disruption to the running of a network, particularly in the autumn season. The proposed method uses a Kalman–Bucy filter to estimate the creep forces in the wheel–rail contact area; post-processing is then applied to provide information indicative of the actual adhesion level. The algorithm uses data that, in practice, would be available from a set of modest cost inertial sensors mounted on the vehicle bogie and wheel-sets. The efficacy of the approach is demonstrated using simulation data from a nonlinear dynamic model of the vehicle and its track interface.     

Fault classification method for the driving safety of electrified vehicles

A fault classification method is proposed which has been applied to an electric vehicle. Potential faults in the different subsystems that can affect the vehicle directional stability were collected in a failure mode and effect analysis. Similar driveline faults were grouped together if they resembled each other with respect to their influence on the vehicle dynamic behaviour. The faults were physically modelled in a simulation environment before they were induced in a detailed vehicle model under normal driving conditions. A special focus was placed on faults in the driveline of electric vehicles employing in-wheel motors of the permanent magnet type. Several failures caused by mechanical and other faults were analysed as well. The fault classification method consists of a controllability ranking developed according to the functional safety standard ISO 26262. The controllability of a fault was determined with three parameters covering the influence of the longitudinal, lateral and yaw motion of the vehicle. The simulation results were analysed and the faults were classified according to their controllability using the proposed method. It was shown that the controllability decreased specifically with increasing lateral acceleration and increasing speed. The results for the electric driveline faults show that this trend cannot be generalised for all the faults, as the controllability deteriorated for some faults during manoeuvres with low lateral acceleration and low speed. The proposed method is generic and can be applied to various other types of road vehicles and faults.     

铁道车辆轴箱弹簧断裂故障对动力学性能的影响

车辆运行过程中,当轴箱弹簧突发断裂故障,会造成动力学状态和性能突变,一系悬挂刚度突然减小,暂时失去承载能力,会威胁车辆行车安全。结合整车的动力学仿真,建立了轴箱弹簧断裂过程的力学模型,对整个断裂过程进行仿真,模拟了轴箱弹簧突然断裂工况下车辆动力学性能变化,分析了轴箱弹簧断裂条件下车辆直线行车安全性以及曲线通过安全性。计算分析结果表明:轴箱弹簧突然断裂导致一系悬挂刚度剧变,引起轮轨垂向力先减小后增大,轮重减载率、脱轨系数等参数增大直至超限,但对轮轨横向力影响不大。     

丰田卡罗拉轿车转向困难故障分析

本文主要介绍一部2012款卡罗拉电动转向系统(EPS)的构造,工作原理,分析该车出现转向困难,组合仪表上P/S警告灯亮起故障的原因,并提出解决故障的方法。     

故障树分析与危险源日志的结合

主要介绍故障树分析方法,并结合工作经验讲述如何将故障树分析结果与危险源日志进行对应链接,从而清晰、形象的为危险源的来源提供有力证据,规范项目技术风险管理。     

Carrier冷藏集装箱微电脑控制器排气压力故障排除

通过对CARRIER冷藏集装箱排气压力故障的分析,阐述修理冷藏集装箱微电脑控制器的一般分析方法、测试方法及应注意问题。     

Fault Diagnosing System of Steam Generator for Nuclear Power Plant Based on Fuzzy Neural Networks

All kinds of reasons are analysed in theory and a fault repository combined with local expert experiences is establishedaccording to the structure and the operation characteristic of steam generator in this paper. At the same time, Kohonen algo-rithm is used for fault diagnoses system based on fuzzy neural networks. Fuzzy arithmetic is inducted into neural networks tosolve uncertain diagnosis induced by uncertain knowledge. According to its self-association in the course of default diagnosis. thesystem is provided with non-supervise, self-organizing, self-learning, and has strong cluster ability and fast cluster velocity.     

船用微机监测系统的故障诊断与排除

由于船用微机监测系统工作条件的特殊性,系统运行过程中经常出现故障。文章根据监测系统的组成及工作特点,论述了监测系统的故障分类,讨论了分析故障的一般方法,并分析监测系统常见故障的原因及对策。