长输油气管道金属损失漏磁内检测技术研究

以管道漏磁内检测器为载体,通过对管体进行在线的漏磁内检测,可以达到量化管道缺陷、避免事故发生的目的。文中介绍了管道金属损失漏磁内检测技术,分析了油气管道漏磁内检测技术原理及漏磁内检测系统组成,利用有限元分析方法研究了管道缺陷尺寸对于漏磁场信号的影响,验证了管道漏磁内检测技术的可靠性。     

双顶管施工下穿既有电力方涵的安全影响分析

为了减少对地下构筑物安全的影响,非开挖的管线施工方式已成为市政给排水管道的最佳施工方案之一.依托南昌市某新建道路排水工程,通过有限元数值模拟分析,分析了双顶管施工对上部既有电力方涵结构的影响.研究结果表明:双顶管同时并行施工和单一先后施工对既有结构沉降的影响有着差异,且双顶管同时并行施工产生的影响更大.在实际工程中,因...     

城市公交车身轻量化分析与设计

作为城市枢纽的公交车,采用纯电动技术可作为降低城市环境污染、减少能源消耗的切入点.目前续驶里程短是制约纯电动公交发展的主要因素.可以通过增加动力电池的电量或者对整车进行轻量化来增加续驶里程.在轻量化设计方面,对高强钢、铝合金、镁合金、工程塑料和碳纤维等几种轻量化材料进行对比分析,从中选出目前较为合适的铝合金材料.通过理...     

Environmental lumping for efficient fatigue assessment of large-diameter monopile wind turbines

Fatigue damage is one of the governing factors for the design of offshore wind turbines. However, the full fatigue assessment is a time-consuming task. During the design process, the site-specific environmental parameters are usually condensed by a lumping process to reduce the computational effort. Preservation of fatigue damage during lumping requires an accurate consideration of the met-ocean climate and the dynamic response of the structure. Two lumping methods (time-domain and frequency-domain) have been evaluated for a monopile-based 10 MW offshore wind turbine, both based on damage-equivalent contour lines. Fatigue damage from lumped load cases was compared to full long-term fatigue assessment. The lumping methods had an accuracy of 94–98% for the total long-term fatigue damage and 90% for individual wind speed classes, for aligned wind and waves. Fatigue damage was preserved with the same accuracy levels for the whole support structure. A significant reduction of computational time (93%) was achieved compared to a full long-term fatigue assessment. For the cases with 30° and 60° wind-wave misalignment, there was a mean underestimation of approximately 10%. Variations in penetration depth did not affect the selection of the lumped sea-state parameters. This work presents a straightforward method for the selection of damage-equivalent lumped load cases, which can adequately preserve long-term fatigue damage throughout the support structure, providing considerable reduction of computational effort.     

舰载雷达稳定平台基座优化设计

本文对某舰载雷达稳定平台基座在船摇、风载和振动载荷作用下的受力情况进行分析和计算。运用有限元技术对原基座的载荷分布进行分析,同时对基座进行结构优化设计。通过对优化后基座的有限元分析计算表明其满足减重要求和船摇、风载和振动条件下的强度设计要求。     

MTMD to increase fatigue life for OWT jacket structures using Powell's method

The Powell's method was developed to determine the optimal stiffness and damping of multi-tuned mass dampers (MTMD) in offshore wind turbine (OWT) support structures under fatigue loads. Numerical examples indicated that the Powell's method results are always better than those using MTMD formulations. With the exception of the blade passing (3P) frequency, it was found in this work that a positive integer (n) multiple of the 3P frequency will also result in a large wind-induced vibration, which can be excited by the frequency of the first structural vertical rotation mode and will cause significant fatigue damage. The first translation mode TMD installed at the tower top is efficient to increase fatigue life at the tower and brace connections, but it cannot reduce fatigue damage at the column and brace connections below the platform. The second translation mode TMD can reduce fatigue damage resulting from large wave loads and thus increase the fatigue life of the braces and columns. The mode-3 TMD with a reduction in the 3(3P) vertical rotation can effectively increase the fatigue life of the braces and columns. Thus, the appropriate use of these TMDs can be effective for the fatigue problem of OWT support structures.     

近场动力学方法及其应用

近场动力学作为一种非局部理论,能够通过键的失效来自发模拟材料的失效、破坏,其在海洋工程领域已取得初步的研究成果,尤其是在冰区船舶与海洋工程领域,更显出了该方法的优越性。为了更好地了解近场动力学在冰区船舶和海洋工程中的应用,对近场动力学在冰区船舶与海洋工程应用中的问题进行梳理,主要包括冰材料本构模型、冰−结构作用模型、冰−水耦合方法、结构物力学模型、水下爆炸破冰应用及结构表面覆冰除冰的应用等。同时,在全面回顾已有研究成果的基础上,分析其特点和面临的挑战,探讨相应的解决思路和未来的研究方向。     

高桩码头异常靠泊有限元仿真模拟

船舶大型化、靠泊作业频繁、管理漏洞以及某些不可抗力因素造成异常靠泊事故时有发生。目前,码头在异常靠泊情况下的受力及位移特性尚不明确,损伤评估缺乏理论基础,为使现场检测更有针对性,利用ANSYS有限元结构分析软件建立了受损码头的数学模型,考虑了桩土间相互作用及橡胶护舷对碰撞的缓冲作用。将模型碰撞损伤结果与码头实际受损情况进行对比,简要分析了碰撞中部分结构受力极值的相对关系和位移情况。结果表明：在该碰撞实例条件下,模型运行基本可反映异常靠泊发生时高桩码头结构损伤情况。     

围区吹填造地新型竹隔堤结构稳定性计算

采用竹结构替代传统的抛石与袋装砂堤,作为围区吹填分区隔堤是一个新的设计思路。为了解该新型隔堤挡土结构在土压作用下的整体安全稳定性与合理的结构尺度,基于浙江省台州东部新区涂面整理工程环湖护岸竹结构外部建设条件,分析影响其整体安全稳定性的因素,采用湖内蓄水平衡土压力的方法,进而运用有限元分析软件PLAXIS计算竹隔堤两侧不同水位差与竹隔堤结构不同跨数组合方案时竹隔堤整体稳定性。     

Dynamic diurnal social taxonomy of urban environments using data from a geocoded time use activity-travel diary and point-based business establishment inventory

In this paper, we explore the diurnal dynamics of joint activity participation in a small city in Pennsylvania, USA, using behavioral data and an inventory of business establishments. We account for the variation caused by the collective impact of social, temporal and spatial choices of individuals to produce predicted space–time visualizations of activity participation. The focus is on how social contexts of an activity impact the temporal and spatial decisions regarding the activity locations and how this impact varies depending on activity types. A comparison across activity types and social interaction types is made among spatial patterns during a day. The CentreSIM dataset, which is a household-based activity diary survey collected in Centre County (Pennsylvania, USA) in 2003, provides very detailed social interaction information enabling the analysis of social, spatial and temporal aspects of activity participation. In this paper we use this information to develop a spatio-temporal interpolation method and demonstration based on kriging. In this way, we extract the dynamic social taxonomy of places from the behavioral information in the dataset and suggest how urban and transportation models can be informed from the dynamics of places by observing “what is taking place” (activities being pursued in the context of this paper) combined with “what exists” (business establishments) or “what is available” (businesses that are open). The method here can also be used to improve the design of urban environments (e.g., filling gaps in desired activity locations), manage specific places (e.g., extending the opening and closing times of businesses), study transportation policies that are sensitive to time of day (e.g., pricing of parking to discourage crowding and traffic congestion), and modeling of spatio-temporal decisions of social activities in travel demand models (e.g., to guide the development of model specification and representation of the space in which behavioral models are applied).