X型排在长江中下游护滩工程中的应用

主要介绍X型系砼块软体排的现状及存在的问题，以及近期实施工程的改造措施。     

钢管混凝土柔性系杆拱桥施工阶段的静力计算分析

以烟台养马岛大桥为工程背景,采用空间有限元分析方法,对下承式钢管混凝土简支柔性系杆拱桥进行了施工阶段的静力分析与计算,介绍该类型桥梁结构施工阶段有限元模型的建模要点及其边界条件,分析了拱肋的位移、应力以及吊杆、系杆的拉力等随施工阶段变化的规律。计算结果表明,该施工阶段静力计算方法较为符合简支拱桥各个施工阶段的受力特点,因而是可行的,其计算结果可以作为施工监测分析的重要参考。     

基于柔刚体模型的高速车轮振动辐射噪声研究

随着轨道车辆速度的不断提升,其运行噪声已成为城市噪声的主要来源之一,在传统的动力学模型基础上,引入了柔性轮对模块,将车轮辐射噪声与模态结合起来,并对车轮结构进行优化设计,以期为低噪声车轮的研究提供参考依据。     

独立轮对柔性耦合转向架耦合刚度对动力学性能的影响

提出一种独立轮对柔性耦合转向架的方案。通过理论分析得知,一旦耦合刚度合理匹配,该转向架就会在二系悬挂系统和柔性耦合元件的协调作用下自动把前后轮对调整到径向位置,这说明独立轮对柔性耦合转向架有望彻底解决独立轮对的导向难题。然后通过数值仿真全面分析了耦合刚度对独立轮对柔性耦合转向架动力学性能的影响,找出了其影响规律,获得独立轮对柔性耦合转向架耦合刚度的最佳匹配关系,为今后独立轮对柔性耦合转向架的方案设计提供了重要的理论依据。同时本文还提出了独立轮对柔性耦合转向架能产生类蛇行运动的新观念。     

Application of analytical model in the prediction of dynamic responses and fatigue damage of flexible risers: Part II – Dynamic analysis of flexible risers in large-scale domain using a direct moment correction method

In recent years, the dynamic responses of flexible risers have been the focus of many researchers. Most flexible risers undergo a substantial level of irregular motion from environmental loadings, which involves a continuous slip of helical wires. The slip of helical wires especially leads to a hysteretic effect by reducing the bending stiffness, making it hard to predict the dynamic responses of flexible risers. The current study, as an extension to Part I, presents a new large-scale dynamic analysis method for flexible risers. The suggested method creates a large-scale model for the dynamic analysis that considers a geometric and bending nonlinearity of flexible risers. The kinematics of each beam element is formulated based on a Green-Lagrangian strain and the interaction with the seabed, providing a realistic analysis of flexible risers. In particular, the current study introduces a direct moment correction method that modifies the internal force vector using an improved analytical model. The improved analytical model is assigned at each node of the large-scale model and estimates an accurate bending hysteresis curve considering the effect of shear deformation and varying tension. The suggested method corrects the bending moment and shear force of all beam elements based on the bending hysteresis curves obtained from the improved analytical model, by which a complex bending behavior of flexible risers is reflected in a large-scale domain. As a result, this study achieves a more accurate prediction of the dynamic responses and fatigue damage of flexible risers. A new dynamic analysis program, called OPFLEX, is developed herein based on the suggested analysis method. Using the developed program, the current study conducts several numerical investigations to identify the effect of the shear deformation and varying tension. Consequently, it is confirmed that the shear deformation of internal layers reduces the fatigue damage of helical wires by delaying the increase of internal stress. It is also identified that the effect of varying tension deteriorates the fatigue life of flexible risers through a continuous change of contact pressure during bending.     

Experimental investigation on vortex-induced force of a Steel Catenary Riser under in-plane vessel motion

A method to identify vortex-induced forces and coefficients from measured strains of a Steel Catenary Riser (SCR) undergoing vessel motion-induced Vortex-induced Vibration (VIV) is proposed. Euler–Bernoulli beam vibration equations with time-varying tension is adopted to describe the out-of-plane VIV responses. Vortex-induced forces are reconstructed via inverse analysis method, and the Forgetting Factor Least Squares (FF-LS) method is employed to identify time-varying vortex-induced force coefficients, including excitation coefficients and added mass coefficients. The method is verified via a finite element analysis procedure in commercial software Orcaflex. The time-varying excitation coefficients and added mass coefficients of an SCR undergoing vessel motion-induced VIV are investigated. Results show that vessel motion-induced VIV is excited at the middle or lower part of the SCR and in the acceleration period of in-plane velocity, where most of the excitation coefficients are positive, while during the deceleration period, the excitation coefficients becomes too small to excite VIVs. Parameter γ [1] has strong correlation with excitation coefficients. In addition, time-varying tensions contribute significantly to the variations of added mass coefficients under the condition that the ratio of dynamic top tension to pretension exceeds the range of 0.7–1.3. Moreover, chaotic behaviors are observed in vortex-induced force coefficients and are more evident with the increase of vessel motion velocity. This behavior may attribute to the randomness existing in in-plane velocity and its coupling with out-of-plane vibrations.     

刚性系杆在软土地区上承式坦拱桥中的应用

介绍了预应力技术在上承式拱桥中的研究及应用现状,提出了在上承式拱桥两桥台之间设置预应力混凝土刚性系杆来平衡水平推力的新思路,并结合背景工程,系统地研究了这种结构体系的受力机理、设计方法及结构控制指标,指出了其相对于柔性系杆的优势及适用条件,并针对地基土比例系数m进行了参数敏感性分析。计算结果表明,参数m的取值对结构受力状态影响显著,建议在地质勘察报告提供的取值范围内选取多个值进行试算。     

水下灌浆定形式海底管道立管固定装置研究

针对海底管道立管管卡发生损坏或者脱落,影响海底管道安全运行的情况,研制新型水下灌浆定型式海底管道立管固定装置。讨论水下管卡的结构形式,材料的选择及管卡灌浆的工艺流程。实验证明,该新型管卡能够代替原有管卡很好地对立管起到保护作用,能确保海底管道的安全运行。     

管壁不连续对管路中传播的弯曲波的隔离

采用梁弯曲振动的运动方程来求解管壁中传播的弯曲波,然后用传递矩阵的方法得出了弯曲波在通过管壁不连续段后的透射系数矩阵。利用边界条件,分析了管壁材料不连续段及其在管路中的布置情况对弯曲波透射系数的影响,并得出了如下结论:作为管路不连续段的铜管、铝管和挠性胶管都可以对管路中传播的弯曲波起到隔离作用,但它们也都有可能使振动放大。这与频率、边界条件和管路不连续段的布置密切相关;对极低频弯曲波的隔离是十分困难的,甚至是不可能的;管路不连续段的布置情况、管路边界条件(即支撑情况)和频率应当是管路隔振设计中需要特别注意的因素;挠性胶管在可以起隔离作用的条件下能够取得比铜管和铝管更低的透射系数和更大的位移补偿。     

城市轨道交通明挖装配式地下结构设计技术及方法

通过多年装配式地下结构建造技术的理论和试验研究，结合实际工程应用，对明挖条件下的城市轨道交通等市政工程预制装配式地下结构的设计技术和方法进行系统性总结。1）从全方位体现装配式技术的工业化建造理念的角度，提出装配式地下结构的设计基本原则和基本规定，并结合明挖装配式结构的特点提出主要设计内容； 2）针对装配式结构设计的重要环节，包括结构体系的确定、基坑工程和结构防水等方面进行论述，提出接头选型、结构拆分及内部结构的设计方法，以及基于装配式结构的基坑工程设计技术要求和设计方法，涵盖支护选型、基坑宽度的确定、桩墙+内支撑体系技术设计要点、基坑回填技术设计要点等，并总结装配式地下结构的防水关键技术。