再生旧沥青混合料用做柔性基层研究

旧沥青混合料的再生利用可以节省建设投资,保护环境,文中介绍了旧沥青混合料残余性能的评价方法,冷拌结合料乳化沥青和稳定剂的选择。通过工程实例探讨了再生料用做柔性基层配合比设计的方法、原则,铺筑的施工工艺及其路用性能的检测跟踪。     

基于刚柔耦合多体动力学模型的配气机构计算

通过在配气机构多刚体模型中引入柔性体,描述了配气机构的动力学性能;建立了柔性体气门弹簧,分析了气门弹簧动刚度的非线性行为,并且依据模态技术计算得到其动态应力;该方法为优化设计配气机构等机械产品及对其进行疲劳性能研究提供了依据。     

The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

The hunting motion of a passenger coach is investigated using a multibody system in which the wheelsets and the rails can be modelled as flexible bodies. By comparing the results for different model variants, in which the structural flexibilities of the wheelsets and of the rails are either taken into account or neglected, the impact of the flexibilities is analysed. It turns out that the flexibilities of both the wheelsets and the rails have a significant impact on the hunting behaviour by increasing the lateral motions of the wheelsets and lowering the critical speed. In order to investigate the impact of the flexibilities under different operating conditions, the calculations are carried out for track geometries using different rail profiles (60E1, 60E2) and different rail cants (1:40, 1:20) and for different values for the friction coefficient (0.25…0.4) at the wheel–rail contact. The results show that the influence of the flexibilities is the strongest for high lateral forces, which occur e.g. for contact geometries leading to high hunting frequencies and for high values of the friction coefficient. The results also show in some cases a strong impact of the flexibilities on the position of the wheel–rail contact on the running surface of the rail, which is of particular interest with respect to wear simulation.     

长寿柔性基层沥青路面的极限应变

长寿柔性路面设计通常采用沥青层底极限拉应变和土基顶部极限压应变作为控制指标。现阶段极限应变指标参照室内试验结果确定，且数值相对固定。而现场路面结构层应变响应值受结构厚度、荷载、环境作用（温度及老化）等因素的影响，在服役过程中不断演化。以2条服役超过35年的柔性路面结构（屯门公路与吐露港公路）为基础，分析了不同服役阶段路面结构层在不同荷载、环境作用下的极限应变响应，探讨了柔性路面极限应变的大概范围。研究结果表明：在初始服役状态下，屯门公路高温状态下沥青层底的极限拉应变为376×10^-6，土基顶部极限压应变为562×10^-6；低温状态下上述极限应变分别降为87×10^-6，249×10^-6；吐露港公路高温状态下沥青层底、土基顶部极限应变分别为149×10^-6，324×10^-6，低温状态下上述应变分别降为50×10^-6，156×10^-6。在经过长期服役后，老化状态下2类路面沥青层底拉应变及土基顶部压应变均大幅降低。屯门公路在使用36年后，某些路段出现零星的疲劳破坏，而吐露港公路则没有发现疲劳破坏。极限应变计算结果表明，路面关键位置的应变受荷载、沥青层厚度、温度和沥青层老化状态等多因素的影响。因此，在进行长寿柔性基层路面设计中，荷载、沥青层厚度、温度及沥青层老化状态等因素都应该考虑在内。     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

城市道路沥青路面结构力学响应分析

针对济南市城市道路常用的三种主要沥青路面结构形式,半刚性基层、复合式基层及柔性基层路面结构,该文采用壳牌设计软件BISAR 3.0计算三种结构沥青路面的应力、应变响应,对各自受力不利形式及空间位置进行对比分析.通过比较,证明:从力学角度分析,复合式基层沥青路面在各项力学性能均优于半刚性基层沥青路面及柔性基层沥青路面,推...     

柔性拱钢性梁桥设计

合肥铁路枢纽南环线跨合宁高速特大桥是一座铁路上跨高速公路的特大桥,该桥采用(114.75+229.5+114.75)m柔性拱刚性梁,主跨跨度在国内同类型桥梁中居于首位.介绍了该桥的总体设计、结构构造及总体施工方法.     

科研院所科研项目的柔性量化管理方案探讨

深入分析科研院所科研项目管理中存在的问题。在分析管理粗放化、生产资源利用率低等弊端的基础上,运用精细化、效益型管理思想,借助计算机辅助手段,提出一种能够适应小批量、多品种科研项目管理的柔性量化管理方案。据此可清楚、准确掌握未来各个时间段的工作量与人力资源和生产资源匹配情况,进而达到合理调整,优化科研项目生产计划的目的。     

Coupled vibration analysis of Maglev vehicle-guideway while standing still or moving at low speeds

Dynamic instability, that is, resonance, may occur on an electromagnetic suspension-type Maglev that runs over the elevated guideway, particularly at very low speeds, due to the flexibility of the guideway. An analysis of the dynamic interaction between the vehicle and guideway is required at the design stage to investigate such instability, setting slender guideway in design direction for reducing construction costs. In addition, it is essential to design an effective control algorithm to solve the problem of instability. In this article, a more detailed model for the dynamic interaction of vehicle/guideway is proposed. The proposed model incorporates a 3D full vehicle model based on virtual prototyping, flexible guideway by a modal superposition method and levitation electromagnets including feedback controller into an integrated model. By applying the proposed model to an urban Maglev vehicle newly developed for commercial application, an analysis of the instability phenomenon and an investigation of air gap control performance are carried out through a simulation.