复杂海域条件下大跨悬索桥钢箱梁安装关键技术

浙江秀山大桥主桥为主跨926 m的双塔三跨连续钢箱梁悬索桥,全桥加劲梁共分89个安装节段,标准节段吊装重量212.6 t,最大吊装重量247.1 t.桥址处地理环境复杂、海洋环境恶劣,钢箱梁安装难度大.根据现场实际情况,钢箱梁中跨由跨中向桥塔方向对称吊装,两岸边跨由锚碇向桥塔方向对称吊装,先合龙中跨再合龙边跨.施工过程...     

磁悬式水位计在工程上的初步应用

简要介绍测量地下水位常用的几种水位计的工作原理及使用性能。并在双触点式和浮漂式水位计的基础上进行技术改造,开发出磁悬浮式水位计,这种水位计不仅工作性能大大改善,而且经济简便,更适合工程勘察使用。     

港池疏浚过程悬浮物影响预测研究及应用

港池疏浚产生的高浓度悬浮泥沙,对海域环境的影响不能忽视。在建立近海悬浮物二维输移扩散数值模型的基础上,采用有限元分步杂交方法求解,对两种不同施工方案下悬浮物的输移扩散进行预测模拟。根据预测结果,对比分析两种施工方法可能对附近海域水质环境造成影响的程度,为施工方案的选择提供科学依据。     

连续油管注入头浮动夹头的共振频率测量

国产浮动夹头在注入头高速运行情况下易发生变形.需要检测共振频率,避开易变形区域.采用敲击声频率测量法（以下简称声频法）获取共振频率信号,利用TMS320C6701DSP实现信号的采集并在CCS下编写DSP程序实现HHT分析得到共振频率.试验阶段,通过功率谱分析与HHT对比,得到浮动夹头的各阶固有频率.     

黄河流凌河段深水栈桥施工技术

乌锡铁路黄河特大桥桥址位于三湖河口至昭君坟段,北岸为乌拉山山前倾平原,南岸为鄂尔多斯台地,桥址主河道宽710 m,水深3~20 m左右,处于严重的流凌河段,搭建施工栈桥成功与否是确保黄河特大桥顺利施工的关键所在。通过方案比选,确定采用浮桥方式,解决了流凌段栈桥的快速搭拆施工难题,取得了一定的经验。     

有沥青上面层的水泥混凝土路面的应力分析

叙述了有沥青上面层的水泥混凝土路面的荷载应力与温度应力公司方法，提出了简化计算公式。     

Transient responses of a VLFS during landing and take-off of an airplane

The transient elastic deformation of a pontoon-type very large floating structure (VLFS) caused by the landing and take-off of an airplane is computed by the time-domain mode-expansion method. The memory effects in hydrodynamic forces are taken into account, and great care is paid to numerical accuracy in evaluating all the coefficients appearing in the simultaneous differential equations for the elastic motion of a VLFS. The time-histories of the imparted force and the position and velocity of an airplane during landing and take-off are modeled with data from a Boeing 747-400 jumbo jet. Simulation results are shown of 3-D structural waves on a VLFS and the associated unsteady drag force on an airplane, which is of engineering importance, particularly during take-off. The results for landing show that the airplane moves faster than the structural waves generated in the early stage, and the waves overtake the airplane as its speed decreases to zero. The results for take-off are essentially the same as those for landing, except that the structural waves develop slowly in the early stage, and no obstacle exists on the runway after the take-off of airplane. The additional drag force on an airplane due to the elastic responses of the runway considered in this work was found to be small in magnitude.     

At-sea towing of a Mega-Float unit

A huge floating offshore platform (359m long, 60m wide, and 3m deep) was towed into the Pacific Ocean for a validation experiment for a floating airport. Full-scale measurements of towline tension and the bending strain on the upper-deck were made during towing. The measured bending moment agreed well with numerical calculation without taking the draught and towing speed into consideration.     

耗能防撞装置在桥墩基底摇摆隔震中的性能研究

在桩基桥墩基底摇摆隔震中，提出一种增加柔性耗能防撞装置设计方案。当罕遇地震发生时，桥墩在与基础分离处发生摇摆，与设计的防撞装置发生碰撞，延长了系统的撞击时间，使撞击力下降。利用多个钢绳柔性防撞圈同期作用的动态有限元方法建立模型，对防护围刚度分三种情况进行讨论，发现在撞击防撞装置的过程中，前期为部分防撞圈发挥作用，后期为全部防撞圈发挥作用，且“同期作用历时”越短越好。分析结果表明，降低防撞构件的初始刚度，可延迟最大撞击时间，同时可减小最大的撞击压力。     

关于既有线C2等级转换点设置的探讨

为充分发挥快速铁路效益,满足区域城市交通运输需求,既有线提速开行动车组工程项目将日益增多,等级转换点的设置问题也将在设计中成为一个必须研究的课题。结合既有集包增建二线实施CTCS-2级列控系统工程,针对既有线的实际情况对C0/C2等级转换点的设置问题进行探讨,提出等级转换点的设置应在满足线路运输组织方式、尽量提高铁路线路运输能力的前提下必须考虑列车运行速度及制动距离等因素的结论。