搅拌桩处理公路软弱地基施工工艺的探讨

以搅拌桩工艺处理软土地基,使其承压性能达到道路施工的必要条件。基于工程实践对其使用工艺进行技术优化,对于提高作业效率和降低工程成本是十分必要的。     

Corrosion rate measurements in steel sheet pile walls in a marine environment

Corrosion of steel structures in the marine environment is a major problem. The deterioration of this kind of structures is costly and difficult to predict both when designing new structures and when estimating the remaining service life time for existing structures. The aim of this investigation was to find indicative values for the corrosion rate of steel sheet piles on the Swedish west coast. Such corrosion rates (mm/year) can be used both when designing new structures by oversizing the steel thickness and when estimating the bearing capacity of existing sheet pile structures. Earlier investigations on the corrosion rates along the Swedish east coast – with salinity from about 0.2% to 0.8% – are still used today as guidelines for the corrosion rate of all steel structures in the Swedish maritime environment even though the salinity on the west coast can be as high as 3.0%.Steel sheet pile wharfs located in the port of Halmstad on the Swedish west coast were inspected by ultrasonic measurements. Three wharf structures with a total length of about 700 m were inspected. None of the inspected wharfs had or have had cathodic protection. The thickness measurements of the steel sheet pile structures were performed by divers.The age of the three inspected sheet pile structures ranged from 36 to 51 years. The dimensions of the original sheet pile sections are known. One of the quay structures is located along a river. The salinity at all wharfs varied from low values at the surface to approx. 2% at the bottom (also in the river outflow).The measured average corrosion rates were in the same order as the design values in the European code. However, the results indicate increased corrosion rates about 1 m below the mean water surface and at the level of the propellers from the ships berthing the most frequented of the inspected wharfs, 3–6 m below water surface.The tolerances of steel sheet thicknesses – usually in the order of ±6% – are often neglected when investigating the remaining thickness in steel sheet piles. A simple calculation model shows that the sheet pile must be almost 50 years of age before an accurate estimation on the corrosion rate can be made, considering the tolerances, if the true original sheet pile thickness is not known.     

高铁湿陷性黄土隧道地基处理浅析

根据湿陷性黄土隧道工程特点,结合宝兰客专客运专线王家岔湿陷性黄土隧道地基加固处理的工程实例,阐述了洞口和洞内两种施工工艺不同的水泥土挤密桩施工方案,分析了隧道内水泥土挤密桩施工对其它工序的干扰和对工期的影响,以及施工振动对初支结构和围岩稳定的危害,提出了有效的控制措施.     

Evaluating the effects of bus design on passenger flow: Is agent-based simulation a feasible approach?

In this paper, we propose an agent-based simulation approach that is capable of simulating the flow of passengers on board buses and at bus stops. The intention is that it will be applied during vehicle development to analyze how vehicle design affects passenger flow, and thus also how it affects system performance such as dwell time. In turn, this could aid the developers in making design decisions early in the development process. Besides introducing the simulation tool itself, the paper explores the realism of the data generated by the tool. A number of passenger flow experiments featuring a full-scale bus mockup and 50 participants were carried out. The setup of these experiments mirrored a number of ‘bus journeys’ (regarding vehicle design, number of passengers boarding/alighting at each stop and so on) that had previously been simulated using the simulation tool. When the data from the simulations were compared with the data from the passenger flow experiments, it could be concluded that the tool is indeed able to generate realistic passenger flows, although with some errors when a large number of passengers board/alight. The simulated dwell times were rationally affected by the tested bus layout aspects. It was concluded that the tool makes it possible to evaluate how variations in bus layouts affect passenger flow, providing data of sufficiently high quality to be useful in early phases of vehicle design.     

高桥墩桩基础的优化设计及因素分析

在高桥墩桩基屈曲能量法分析的基础上,提出兼顾结构稳定、强度和经济性的优化模型,并应用优化算法中非线性序列二次规划法,进行优化设计探讨,同时给出优化设计算法流程图,编制了相应的优化计算程序;为了解桥墩高度、轴向荷载、地基比例系数和混凝土弹性模量对于高桥墩桩基屈曲的影响,结合优化设计模型进行了因素分析,探讨了参数变量对目标函数最优值的影响规律和程度,比较结果说明,在进行高桥墩桩基的屈曲受力分析时,高桥墩的大变形影响不容忽视;而一般在工程设计中,可考虑将桩周土体和混凝土弹性模量的增强作用作为设计的安全储备。     

填料性能对预应力锚拉式桩板墙影响的数值分析

预应力锚拉式桩板墙是一种得到广泛应用的新型支挡结构,本文通过建立耦合分析数值模型对桩板墙的受力特征进行了有限元分析。通过分析了解填料的力学参数(变形模量、摩擦角、粘聚力)对桩板墙位移、弯矩、土压力以及锚固端接触应力和自由段轴力的变化。揭示填料力学性能对预应力锚拉式桩板墙的影响,为类似工程的设计提供参考。     

信号采样理论在交通流检测点布设中的应用

在对交通流检测点布设领域研究应用现状进行分析与抽象的基础上,提出交通流检测点布设本质上属于空间交通流信号采样问题。依据信号采样理论,建立了确定检测点间距或密度的方法与流程,该流程包括空间交通流信号产生、离散傅里叶变换、频谱分析、间距确定、误差分析5个步骤。对高速公路拥挤状态下的仿真分析表明:100 m的检测点间距可以满足对拥挤交通流状态的真实检测,该数值接近于实际应用中的最小值(125 m),说明该理论方法具有较好的实用性。     

大吨位超长钢筋笼的制造与安装

简要介绍南京大胜关长江大桥主桥主墩深水基础钻孔桩超长钢筋笼的制造与安装。