汽车制动液的发展与选用

汽车制动液是保证车辆有效制动和行驶安全的专用化学制品。介绍了制动液的基本要求、发展概况、以及制动的性能和选用中应注意的事项。     

Evaluation of added resistance in regular incident waves by computational fluid dynamics motion simulation using an overlapping grid system

A computational fluid dynamics simulation method called WISDAM-X was developed to evaluate the added resistance of ships in waves. The Reynolds-averaged Navier–Stokes (RANS) equation was solved by the finite-volume method and a MAC-type solution algorithm. An overlapping grid system was employed to implement rigorous wave generation, the interactions of ships with incident waves, and the resultant ship motions. The motion of the ship is simultaneously solved by combining the solution of the motion of the ship with the solution of the flow about the ship. The free surface is captured by treatment by the density-function method. The accuracy of WISDAM-X is examined by a comparison with experimental data from a container carrier hull form, and shows a fairly good agreement with respect to ship motion and added resistance. Simulations were also conducted for a bow-form series of a medium-speed tanker to examine the effectiveness of the WISDAM-X method as a design tool for a hull form with a smaller resistance in waves. It was confirmed that the WISDAM-X method can evaluate the added resistance with sufficient relative accuracy and can be used as a design tool for ships.     

The clinical analysis of three methods in the treatment of intracranial bacterial infection

Objective To analyze the effect of three therapeutic methods to find an optimal approach to the treatment of intracranial bacterial infection by retrospectively reviewing 33 intracranial bacterial infection patients who were admitted from 1995 to 2008 in oar hospital. Methods The treatments by intermittent lumbar puncture,continuous lumbar subarachnoid space drainage, and embedment of Ommaya cyst for continuous drainage from the ventricles were performed in 15 cases, 12 cases, and 6 cases respectively along with intravenous application of full dose of antibiotics. Results Nineteen cases were cured and the best prognosis was from the group of Ommaya cyst embedment and continuous drainage from the ventricles. Conclusion Management goals are prompt recognition of the central nervous system (CNS) infection, rapid identification of causative organisms and initiation of treatment with the optimal management methods for complications. Embedment of Ommaya cyst for continuous drainage from the ventricle is a safe and effective treatment for intracranial bacterial infection.     

On the application of hydraulic theory to the deep-water flow through the Irbe Strait

A flow-dependent critical-point method for investigating topographically controlled flow in natural channels is applied to the bottom current through the Irbe Strait connecting the Baltic proper and the Gulf of Riga. This approach is based on the functional formalism due to Gill [Gill, A.E., 1977. The hydraulics of rotating-channel flow. J. Fluid Mech., 80, 641–671.], and here is used for the stratified flow structure observed during the IRBEX-95 field campaign. A critical section of the realizable flow regime was found to be located slightly downstream of the most pronounced horizontal constriction of the channel. The predicted baroclinic volume flux 7200 m³ s⁻¹ overestimates the observed mean bottom-water transport by around 30%, a discrepancy which most likely can be explained by the lack of sea level conditions and friction in the model.     

基于OpenFOAM的发动机舱回流计算方法研究

研究车辆在怠速工况下的发动机舱热空气回流问题，基于OpenFOAM 软件进行回流计算方法的开发。通过设置监控面及组分转换面来重新定义格栅新空气和舱内回流热空气等组分，可直接计算出回流在监控面上的分布及回流率和回流量。根据开发的方法对某款插电式混合动力汽车（Plug-in Hybrid Electric Vehicle，PHEV）车型进行计算并提出不同的优化方案，使其发动机舱回流率从32.7% 分别降低至24.0%和9.3%，回流量从0.169 kg/s分别降低至0.128 kg/s和0.048 kg/s，从而降低了冷凝器等散热器的进风温度，提高了怠速工况下热管理系统的性能。     

Flow-field guided steering control for rigid autonomous ground vehicles in low-speed manoeuvring

ABSTRACT

This paper studies the low-speed manoeuvring problem for autono-mous ground vehicles operating in complex static environments. Making use of the intrinsic property of a fluid to naturally find its way to an outflow destination, a novel guidance method is proposed. In this approach, a reference flow field is calculated numerically through Computational Fluid Dynamics, based on which both the reference path topology and the steering reference to achieve the path are derived in a single process. Steering control considers three constraints: obstacle and boundary avoidance, rigidity of the vehicle, plus the non-holonomic velocity constraints due to the steering system. The influences of the parameters used during the flow field simulation and the control algorithm are discussed through numerical cases. A divergency field is defined to evaluate the quality of the flow field in guiding the vehicle. This is used to identify any problematic branching features of the flow, and control is adapted in the neighbourhood of such branching features to resolve possible ambiguities in the control reference. Results demonstrate the effectiveness of the method in finding smooth and feasible motion paths, even in complex environments.     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.     

轮胎压路机驱动方式的对比分析

通过对现有市场上的轮胎压路机机械传动、液力传动、液压传动3种传动方式的对比分析，归纳出其优缺点，综合分析得出液压传动的轮胎压路机在性能、工作效率、维护保养、驾驶的舒适性方面有着较为明显的优势。     

船舶舱室置换通风系统的数值模拟和优化

船上有些空间大、人员集中、船体结构复杂的舱室,传统送风方式难以满足需求,给空气环境设计带来很大挑战。文章采用计算流体力学方法研究置换通风系统在船舶舱室中的应用,通过建立物理和数值计算模型,在设计初始阶段对其进行气流组织、热舒适性等方面的模拟分析和优化应用研究;针对某实船舱室的置换通风系统原始方案和优化方案进行对比分析,结果表明置换通风系统具有流动分层和垂直温度梯度的特点。相比原始方案,优化方案使舱室内温度、风速和热舒适性指标等得到优化,有效降低了吹风感,保证人体周围的空气品质,热舒适性指标也符合标准要求。对船舶置换通风系统的应用研究具有借鉴意义。     

层合圆锥壳的声辐射

为了研究流体载荷作用下正交铺设层合圆锥壳的声辐射,详细研究了一个锥壳的声辐射理论模型。通过把层合圆锥壳划分为许多小段圆柱,处理作用在锥壳上的重质流体载荷。然而,锥壳的位移场仍然由单个锥壳的运动方程描述。锥壳的位移利用波传播法和Galerkin法求解。锥壳的远场声辐射利用两端带无限障板的全部圆柱段的声辐射相叠加。声压在波数域表示。研究了层合锥壳的结构声辐射特性。