汽车制动液的发展与选用

汽车制动液是保证车辆有效制动和行驶安全的专用化学制品。介绍了制动液的基本要求、发展概况、以及制动的性能和选用中应注意的事项。     

Evaluation of added resistance in regular incident waves by computational fluid dynamics motion simulation using an overlapping grid system

A computational fluid dynamics simulation method called WISDAM-X was developed to evaluate the added resistance of ships in waves. The Reynolds-averaged Navier–Stokes (RANS) equation was solved by the finite-volume method and a MAC-type solution algorithm. An overlapping grid system was employed to implement rigorous wave generation, the interactions of ships with incident waves, and the resultant ship motions. The motion of the ship is simultaneously solved by combining the solution of the motion of the ship with the solution of the flow about the ship. The free surface is captured by treatment by the density-function method. The accuracy of WISDAM-X is examined by a comparison with experimental data from a container carrier hull form, and shows a fairly good agreement with respect to ship motion and added resistance. Simulations were also conducted for a bow-form series of a medium-speed tanker to examine the effectiveness of the WISDAM-X method as a design tool for a hull form with a smaller resistance in waves. It was confirmed that the WISDAM-X method can evaluate the added resistance with sufficient relative accuracy and can be used as a design tool for ships.     

钢桥面板纵肋顶板焊缝疲劳裂纹扩展的关键影响因素

正交异性钢桥面板疲劳问题突出，纵肋与顶板焊缝处是其关键疲劳易损部位，研究该部位疲劳裂纹的扩展过程并确定关键影响因素及其效应，有助于深刻理解其疲劳损伤机理。建立正交异性钢桥面板疲劳试验节段模型的有限元分析模型，将纵肋与顶板焊缝焊根处的疲劳裂纹近似为半椭圆形裂纹，基于断裂力学实现其扩展全过程的三维数值模拟。在此基础上研究初始裂纹的纵向位置和初始裂纹形状对疲劳裂纹扩展过程的影响，阐明扩展过程中的疲劳裂纹的形状变化，以及疲劳裂纹关键部位应力强度因子幅值的变化规律。研究表明：对于典型的正交异性钢桥面板纵肋与顶板焊缝，在纵向一段范围内，初始裂纹的纵向位置对裂纹扩展的影响不大；初始裂纹形状对裂纹扩展的影响主要体现在裂纹扩展的初始阶段，经过一段时间的扩展之后，不同形状的初始裂纹将演变为相对稳定的形状；持续一段时间后，裂纹将逐渐变得较为扁长；疲劳裂纹在深度方向上扩展超过约顶板厚度一半时，最深点的扩展速率将会减慢；深度相同的裂纹，形状越扁长时越倾向于向深度方向扩展，越不扁长时越倾向于向长度方向扩展。     

板-桁模型计算钢筋混凝土构件抗扭强度综述

首先简单介绍了现有的钢筋混凝土构件抗扭强度计算的简化力学模型,并指出了板-桁模型提出的必要性,最后对板-桁模型进行了详细介绍,有关经验可供相关专业人员参考。     

车辆侧翻的运动力学分析及预防措施

车辆转弯发生侧翻是最常见、最严重的交通事故之一。对车辆转弯的4种运动状态进行了力学分析，对“车轮下的奇迹”进行科学的压力测算，提出了防止车辆侧翻的具体措施。     

The clinical analysis of three methods in the treatment of intracranial bacterial infection

Objective To analyze the effect of three therapeutic methods to find an optimal approach to the treatment of intracranial bacterial infection by retrospectively reviewing 33 intracranial bacterial infection patients who were admitted from 1995 to 2008 in oar hospital. Methods The treatments by intermittent lumbar puncture,continuous lumbar subarachnoid space drainage, and embedment of Ommaya cyst for continuous drainage from the ventricles were performed in 15 cases, 12 cases, and 6 cases respectively along with intravenous application of full dose of antibiotics. Results Nineteen cases were cured and the best prognosis was from the group of Ommaya cyst embedment and continuous drainage from the ventricles. Conclusion Management goals are prompt recognition of the central nervous system (CNS) infection, rapid identification of causative organisms and initiation of treatment with the optimal management methods for complications. Embedment of Ommaya cyst for continuous drainage from the ventricle is a safe and effective treatment for intracranial bacterial infection.     

On the application of hydraulic theory to the deep-water flow through the Irbe Strait

A flow-dependent critical-point method for investigating topographically controlled flow in natural channels is applied to the bottom current through the Irbe Strait connecting the Baltic proper and the Gulf of Riga. This approach is based on the functional formalism due to Gill [Gill, A.E., 1977. The hydraulics of rotating-channel flow. J. Fluid Mech., 80, 641–671.], and here is used for the stratified flow structure observed during the IRBEX-95 field campaign. A critical section of the realizable flow regime was found to be located slightly downstream of the most pronounced horizontal constriction of the channel. The predicted baroclinic volume flux 7200 m³ s⁻¹ overestimates the observed mean bottom-water transport by around 30%, a discrepancy which most likely can be explained by the lack of sea level conditions and friction in the model.     

基于OpenFOAM的发动机舱回流计算方法研究

研究车辆在怠速工况下的发动机舱热空气回流问题，基于OpenFOAM 软件进行回流计算方法的开发。通过设置监控面及组分转换面来重新定义格栅新空气和舱内回流热空气等组分，可直接计算出回流在监控面上的分布及回流率和回流量。根据开发的方法对某款插电式混合动力汽车（Plug-in Hybrid Electric Vehicle，PHEV）车型进行计算并提出不同的优化方案，使其发动机舱回流率从32.7% 分别降低至24.0%和9.3%，回流量从0.169 kg/s分别降低至0.128 kg/s和0.048 kg/s，从而降低了冷凝器等散热器的进风温度，提高了怠速工况下热管理系统的性能。     

Flow-field guided steering control for rigid autonomous ground vehicles in low-speed manoeuvring

ABSTRACT

This paper studies the low-speed manoeuvring problem for autono-mous ground vehicles operating in complex static environments. Making use of the intrinsic property of a fluid to naturally find its way to an outflow destination, a novel guidance method is proposed. In this approach, a reference flow field is calculated numerically through Computational Fluid Dynamics, based on which both the reference path topology and the steering reference to achieve the path are derived in a single process. Steering control considers three constraints: obstacle and boundary avoidance, rigidity of the vehicle, plus the non-holonomic velocity constraints due to the steering system. The influences of the parameters used during the flow field simulation and the control algorithm are discussed through numerical cases. A divergency field is defined to evaluate the quality of the flow field in guiding the vehicle. This is used to identify any problematic branching features of the flow, and control is adapted in the neighbourhood of such branching features to resolve possible ambiguities in the control reference. Results demonstrate the effectiveness of the method in finding smooth and feasible motion paths, even in complex environments.     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.