高速排水型船舶艉浪数值计算

采用近、远域结合的方法,对高速排水型船舶在深水状态下的NPL单体船、双体船以及三体船的艉浪进行数值计算,计算与试验比较表明该方法是可行性的,初步探讨了深水条件下单体船艉浪的衰减规律。     

自锚式斜拉—悬索协作体系桥活载响应分析

结合一座自锚式斜拉—悬索协作体系桥的方案设计,采用了非线性和线性二阶两种方法对活载作用下的结构体系进行了对比计算,讨论了能否用线性二阶的方法替代非线性方法的可行性,对这一体系桥梁的研究与工程设计有一定的参考价值。     

土的应力应变关系中柔度矩阵的研究

在土的应力应变关系中,柔度矩阵要求主对角线元素为正且主对角线元素占优,对主应力表示的柔度矩阵进行了研究,证明了这两个条件同时满足时柔度矩阵的行列式必大于0.因而,柔度矩阵的行列式是否大于0可以作为评价土的本构模型合理性的一个方法.通过对传统弹塑性模型塑性柔度矩阵的研究,发现传统弹塑性模型的塑性柔度矩阵行列式等于0,不能...     

An efficient and exact event-based algorithm for solving simplified first order dynamic network loading problems in continuous time

In this paper a novel solution algorithm is proposed for exactly solving simplified first order dynamic network loading (DNL) problems for any generalised network. This DNL solution algorithm, termed eLTM (event-based Link Transmission Model), is based on the seminal Lighthill–Witham–Richards (LWR) model, adopts a triangular fundamental diagram and includes a generalised first order node model formulation. Unlike virtually all DNL solution algorithms, eLTM does not rely on time discretisation, but instead adopts an event based approach. The main advantage of this approach is the possibility of yielding exact results. Furthermore, an approximate version of the same algorithm is introduced. The user can configure an a-priori threshold that dictates the approximation error (measurable a-posteriori). Using this approximation the computational effort required decreases significantly, making it especially suitable for large scale applications. The computational complexity is investigated and results are demonstrated via theoretical and real world case studies. Fixed periods of stationary demands are included adopting a matrix demand profile to mimic basic departure time demand fluctuations. Finally, the information loss of the approximate solution is assessed under different configurations.     

混合下单模式下在线餐饮订单配送优化模型

针对在线餐饮订单量激增及订单到达非均匀分布导致的调度不合理与资源浪费等问题，提出顾客提前下单与动态实时下单相结合的下单模式，研究此模式下订单配送优化. 考虑在线餐饮订单配送优化具有的动态VRP和多回程VRP属性，以最小化配送成本为目标，建立带有软时间窗的整数规划模型. 设计基于插入算法和2-opt 邻域搜索的混合启发式算法求解模型. 通过算例，分析提前下单顾客比例、提前下单时长等因素的影响. 结果表明，单个因素的增加会降低配送成本，当两者同时增加，因系统达到饱和使配送成本不升反降，因此要调整措施使顾客下单情况与系统配送能力相适应.     

A Note on Shor''s Quantum Algorithm

Shor proposed a polynomial time algorithm for computing the order of one element in a multiplicative group using a quantum computer. Based on Miller's randomization, he then gave a factorization algorithm. But the algorithm has two shortcomings, the order must be even and the output might be a trivial factor. Actually, these drawbacks can be overcome if the number is an RSA modulus. Applying the special structure of the RSA modulus,an algorithm is presented to overcome the two shortcomings. The new algorithm improves Shor's algorithm for factoring RSA modulus. The cost of the factorization algorithm almost depends on the calculation of the order of 2 in the multiplication group.     

半序F-型拓扑空间中一类算子方程的可解性

在引入-辅助序的F-型拓扑空间中,利用其相关性质,采用半序方法研究了一类算子方程Lx=Nx的可解性,证明了其解的存在性。     

运用二阶摄动方法预测焊接点疲劳微弯裂纹的路径发展

利用二阶摄动方法分析研究了轻微弯曲疲劳裂纹尖端应力强度因子的变化幅度,进一步得到了在循环载荷下直线裂纹微弯延伸尖端应力强度因子变化幅值的近似表达式.以匹配渐进扩张的形式考虑了远区域边界条件的效果,研究了裂尖附近的渐进应力场.利用Irwin公式计算出了由于裂纹发展而引起的应变能释放率变化幅值.预测了在具有非均匀断裂韧度的物质中裂纹的延伸.考虑了循环载荷、残余应力,以及由于焊接而引起的物质衰变等因素,利用了二阶摄动方法预测了沿着焊接点传播的弹脆性裂纹路径.     

预应力束张拉顺序对锚下局部应力影响分析

预应力混凝土构件中通常布置有多束预应力束,在施工设计中需要考虑预应力束的张拉顺序,合理的进行预应力筋的张拉。采用有限元程序ANSYS对不同的预应力束张拉顺序下某大桥主粱被动锚固区的局部应力进行分析计算,计算结果对同类桥梁的设计施工有一定的参考价值。     

Improvement of the second order approximation of the smoothed particle hydrodynamics

The smoothed particle hydrodynamics (SPH), as a fully Lagrangian particle method, has been successfully applied to astrophysical problems and extended to elastic dynamics and computational fluid dynamics.High order derivatives have to be approximated when elastic dynamics problems are modeled. However, the approximation errors in SPH could lead to computational failure in the case that the order of derivative is high.A novel method was proposed in order to improve the accuracy of SPH method, which shows the relationship between the selected functions and their SPH approximations. The entire involved system was represented by a finite number of particles that carry individual mass and occupy individual space, and the integral interpolation was approximated by a summation interpolation. In addition, error comparison was made between SPH method with and without the present improvement.