桩基建模方法对自升式钻井平台动力响应的影响

随着海洋油气开采作业水深的不断增加,海洋平台固有频率随之降低,易与相同频率成分的波浪产生共振,因此对平台动力响应特性研究是非常有必要的,而桩基模型在平台动力响应分析中发挥着关键作用。以某400英尺自升式钻井平台研究对象,基于等效建模的思想,分别建立了固支桩基、铰接桩基、线性弹簧桩基及非线性弹簧桩基四种有限元模型,并对其进行静力分析、模态分析及瞬态动力学分析,通过对比得到的振动频率、动力放大因子及波流惯性力,得出弹簧桩基模型在平台动力响应分析中的有效性及合理性结论。     

计及叶片载荷的双机对转式海流发电机系泊系统动力分析

本文设计了一种新型的双机对转式海流发电机并对其系泊系统与叶片载荷和直径关系进行模拟分析。首先将单机式海流发电机与已有研究进行对比验证其可靠性，然后在不改变系泊方式的前提下，设计出双机式结构，并通过分析机身位移和旋转比较两种系统的稳定性。为考虑叶片载荷对系泊系统影响，在Orcaflex中对不同精细程度的叶片进行建模，分别对比单一翼型/三翼型/九翼型的数值模拟结果。接着使用M-BEMT软件优化后的翼型参数，对比使用原始升阻力系数的三翼型发电机的模拟结果，同时将使用不同直径叶片的发电机系统进行对比，说明双机式发电机的稳定性更优，对海流发电机及其系泊系统的设计提供重要参考价值。     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

车务可视化信息系统设计与实现

车务可视化信息系统通过三维模型及虚拟漫游的展现形式,将铁路运行及运营的动态信息进行集成和柔性展示,实现旅客服务信息及运输管理相关数据的整合,通过可视化的展现方式既方便旅客及管理人员,又充分展示铁路信息化建设的成果。     

SS4B电力机车转向架可视化标准作业系统研究

SS_4B型电力机车转向架结构复杂,检修工序繁琐,对作业人员的检修技能培训要求高,针对目前培训方式存在的问题,提出建立转向架可视化标准作业系统,综合利用多媒体技术、数字化建模技术以及虚拟现实技术,构建集三维动画和人机交互功能于一体,信息集中化、培训作业标准化、培训时空自由化、周期短且考核针对性强的可视化培训系统,实现对SS_4B型电力机车转向架系统的内部结构、检修流程及其动态拆装过程的逼真模拟,提升实操培训效率和沉浸式体验,提高检修人员技能水平。     

轨道复合不平顺对无缝线路横向变形的影响分析

轨道复合不平顺会对行车的安全及稳定性产生较大影响,也是影响无缝线路横向变形的一个重要因素。为研究轨道复合不平顺对无缝线路的具体影响,通过构建三维轨道框架非线性有限元模型,采用轨道框架单点(或多点)位置发生横向及竖向位移来模拟复合不平顺状态,通过计算获取节点位移变化规律,进而分析轨道复合不平顺对无缝线路横向变形的影响作用。研究结果表明,轨道的复合不平顺会对无缝线路的横向变形产生显著的影响;当线路出现三角坑等类似病害时,其节点位移变化更为显著,在无缝线路的日常养护维修中应尤为注意。     

某型汽轮机超速脱扣试验浅析

某型汽轮机的超速保护装置采用脱扣结构,文章针对该汽轮机的超速脱扣结构进行分析,总结此种超速脱扣装置的装配要求和试验方法,以利于该型汽轮机的生产。     

Environmental and transport effects of warehouse relocationing: evidence from Norway

Reducing traffic volumes and CO2-emissions from freight transport has proven difficult in many countries. Although the increasing suburbanization of warehouses is seen as a relevant land use trend, comprehensive analyses of their impact remain scarce. This study uses real data in modeling transport, costs, environmental and modal effects from warehouse relocations around Oslo and Trondheim (Norway). Results indicate that for Oslo, traffic performance (ton-km), CO2-emissions, and transport costs increase following warehouse suburbanization. For Trondheim, transport performance and CO2-emissions increase less, while transport costs decrease marginally. We conclude that specific case characteristics (geography and trade patterns) are important in determining the strength and direction of effects, and expect that common concomitant developments (warehouse centralization and consolidation) would lead to more pronounced results. Our findings confirm some, but challenge other, findings from the relatively scarcely literature available. Finally, the study's more general insights and observations can help advance similar analyses beyond Norway.     

Life cycle assessment of heated apron pavement system operations

Heated pavement systems (HPS) offer an attractive alternative to the cumbersome process of removing ice and snow from airport pavements using traditional snow removal systems. Although snow and ice removing efficiency and economic benefits of HPS have been assessed by previous studies, their environmental impact is not well known. Airport facilities offering public or private services need to evaluate the energy consumption and global warming potential of different types of snow and ice removal systems. Energy usage and emissions from the operations of hydronic heated pavement system using geothermal energy (HHPS-G), hydronic HPS using natural gas furnace (HHPS-NG), electrically heated pavement system (EHPS), and traditional snow and ice removal system (TSRS) are estimated and compared in this study using a hybrid life cycle assessment (LCA). Based on the system models assessed in this study, HPS application in the apron area seems to be a viable option from an energy or environmental perspective to achieve ice/snow free pavement surfaces without using mechanical or chemical methods. TSRS methods typically require more energy and they produce more greenhouse gas (GHG) emissions compared to HPS during the operation phase, under the conditions and assumptions considered in this study. Also, HPS operations require less energy and have less GHG emissions during a snow event with a smaller snowfall rate and a larger snow duration.     

Capturing correlation with a mixed recursive logit model for activity-travel scheduling

Representing activity-travel scheduling decisions as path choices in a time–space network is an emerging approach in the literature. In this paper, we model choices of activity, location, timing and transport mode using such an approach and seek to estimate utility parameters of recursive logit models. Relaxing the independence from irrelevant alternatives (IIA) property of the logit model in this setting raises a number of challenges. First, overlap in the network may not fully characterize perceptual correlation between paths, due to their interpretation as activity schedules. Second, the large number of states that are needed to represent all possible locations, times and activity combinations imposes major computational challenges to estimate the model. We combine recent methodological developments to build on previous work by Blom Västberg et al. (2016) and allow to model complex and realistic correlation patterns in this type of network. We use sampled choices sets in order to estimate a mixed recursive logit model in reasonable time for large-scale, dense time-space networks. Importantly, the model retains the advantage of fast predictions without sampling choice sets. In addition to estimation results, we present an extensive empirical analysis which highlights the different substitution patterns when the IIA property is relaxed, and a cross-validation study which confirms improved out-of-sample fit.