软弱围岩隧道修建新方法——核心土加固变形控制法

2006年我国铁路系统相关施工单位开始接触变形控制法隧道施工技术,经过长达5年的基础理论学习研究与准备,在铁道部和兰渝铁路公司的支持下,2011年由中铁瑞威公司和意大利土力公司联合在兰渝铁路桃树坪隧道进行了中国首次隧道核心土加固变形控制法应用试验研究,并取得成功。文章通过工程实践,对桃树坪隧道的工程概况、地质问题、施工工艺、施工设备及核心土加固控制变形技术的应用效果作了较详细介绍。     

粉喷桩施工技术在高速公路软基加固中的应用

文章结合某高速公路软基加固工程实例,介绍了粉喷桩软基加固处理施工的工艺流程及技术要点,并分析了影响粉喷桩软基加固施工的主要因素,提出了相应的质量控制措施。     

箱形拱桥结构检测及加固处理

文章以梧州西江大桥箱形拱桥为例,在对桥梁结构进行外观检测的基础上,利用Midas Civil 2010建立模型,通过静载和动载试验分析了该桥的承载能力及结构力学特性,提出了相应的维修加固措施,并探讨了维修加固处理的工程效果。     

丽香铁路黄山哨隧道下穿岩堆段设计施工关键技术

以下穿岩堆段的丽香铁路黄山哨隧道为工程依托,对岩堆段地表开裂及洞内初期支护边墙严重变形的问题进行研究。地表埋设6根测斜管监测地表位移情况,洞内布置3个断面进行围岩压力、钢架内力、二次衬砌内力、初期支护与二次衬砌间的接触压力、锚杆轴力量测。在分析现场岩堆段洞内外受力机制及原因的基础上,根据数值计算结果优化二次衬砌断面型式及进一步加大二次衬砌厚度及配筋。采取以下措施控制隧道岩堆段变形： 1）地表岩堆土石接触面开裂处增设截排水措施; 2）加大隧道初期支护钢架型号及加长岩堆侧边墙径向系统锚杆; 3）加大隧道边墙轮廓曲率并优化隧道二次衬砌型式为圆顺型; 4）隧道预留变形量加大至30 cm; 5）隧道二次衬砌内净空预留50 cm补强空间; 6）隧道拱部设置42小导管超前支护。现场岩堆段采取以上措施后已顺利施工通过,根据洞内外监测结果显示,结构在安全可控范围内。     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

组合型水泥粉煤灰碎石桩(CFG桩)复合地基在深厚软基处理中的应用

在深厚软土地基(fak≤100 kPa)上建造储罐等建筑物,承载力要求高、不均匀沉降变形要求严,若采用单一CFG桩复合地基加固,可能导致桩距过小或桩长太长,需要采用组合型复合地基,CFG桩+振冲碎石桩复合地基是组合型复合地基的一种。根据CFG桩+碎石桩组合型复合地基的加固机理,分析了其受力特性以及CFG桩和碎石桩的作用,研究表明CFG桩对提高地基承载力和减小沉降起控制作用。基于优化理论,建立了组合复合地基的优化设计方法。通过工程实例讨论了组合复合地基的优化设计方法,结果表明:复合地基的承载力、沉降量和经济效益均满足工程要求。     

软土地基中格形地下连续墙护岸前沿土体加固参数研究

格形地下连续墙是一种新型直立式护岸结构,整体刚度大,辅之以护岸前沿的软土地基加固,能减少墙体水平位移,确保工程结构和周边环境安全。以某电厂取水口护岸工程为例,介绍格形地下连续墙结构在护岸工程中的应用,利用有限元分析软件Plaxis3D,采用土体硬化模型(HS模型)建立三维模型,给出加固参数设计方法,研究护岸前沿土体加固的面积置换率、加固宽度和加固深度对格形地下连续墙变形的影响。因软土地基上结构受软土强度参数的影响较大,故对软土强度指标和水泥土强度指标进行敏感性分析。     

三维地面模型测量技术在水运工程中的应用

码头、航道等水运工程的三维设计、BIM设计需要更精细的、直观的、全覆盖的三维地面模型。利用多波束测深技术、无人机航测技术和三维激光扫描技术采集高精度的测量点云数据,基于AutoCAD、Civil 3D等软件平台,建立高精度、直观的三维地面模型的技术方案,结合工程实例进行论证分析。结果表明,从陆域到水域再到局部重点建构筑物三维测量内外业技术解决方案合理、效果显著,能较好地满足三维设计、BIM设计等要求,具有较高的应用和参考价值。     

振冲法加固砂土地基工艺选择及施工参数控制

根据砂土的黏粒含量,振冲法可采用不加填料的振冲密实法或有填料的振冲置换法,选择合适的振冲施工工艺和确定合理的工艺参数,与地基加固效果和地基处理的工程投资密切相关。在振冲器的振动荷载作用下,由于饱和砂土的液化产生振密作用,根据孔隙水压力的增长模型,推导了饱和砂土的临界液化时间,并分析留振时间的影响因素。结合两个工程实例,探讨了振冲密实法和振冲置换法两种工艺的适应性及加固效果。根据砂土的类型和黏粒含量,将砂土地基分为3类,不同的砂土地基采用合适的振冲工艺,并得出施工参数的合理区间。