大风天气下洋山港超大型船舶撤离泊位方法研究

根据洋山港自然、地理条件,运用目前在航道论证方面已经比较成熟的船舶操纵模拟器,有针对性地对大风天气下靠泊超大型船舶安全撤离泊位方法进行了研究;根据所选8000 TEU超大型集装箱船舶的模拟船型撤离泊位进行模拟实验的结果和在对实验数据充分、系统分析的基础上,提出了超大型船舶安全撤离泊位的具体方法,为洋山港超大型集装箱船舶在大风天气下安全撤离泊位提供比较科学的参考依据。     

南通港南通港区规划中若干问题的探讨

由于南通地区公路客运优势的确立,南通港区作为南通市对外交通的中心地位受到严重挑战,因此,港区功能由客运转为货运成为必然。对客运设施进行全面改造;将浮码头改造为固定码头;对任港河口的封堵进行研究;废弃内河港池,扩大陆域纵深及面积是南通港区改造的四大关键举措。     

沥青运输船装卸系统优化设计

针对沥青的特性,本文对沥青装卸系统进行了分析,在沥青泵组、装卸管系、伴热管系等方面提出了几种可行的设计方案,并对这些方案作了比较,指出了设计中应注意的一些问题。     

SS3B固定重联机车的研制

系统介绍了由2节SS3B机车经过技术改造成12轴重载货运SS3B固定重联机车；重点介绍了机车的主要结构、性能参数和总体布置，同时简述了机车的主要系统和特点。试验表明，机车的改造是成功的。     

Sediment geochemistry and mineralogy in Milos bay, SW Kyklades, Aegean Sea, Greece

This work aims at studying the geochemistry and mineralogy of Milos bay surface sediments. The bay forms an enclosed marine area, supplied totally by volcanic formations. Totally 16 samples were subjected to sedimentological (grain size), mineralogical (microscope examination and X-ray diffraction of the bulk sample and the pelitic fraction), and geochemical analyses (X-ray fluorescence in the pelitic fraction). Also the carbonate content was determined. Sediments were sandy with a high carbonate content (14–58%). The dominant minerals recognized in the pelitic fraction were smectite, kaolinite and illite, followed by chlorite, quartz, calcite, Mg-calcite and feldspars. In general, element concentrations appeared to be within the normal range, except Pb and Zn, which exhibited relatively high values. The Index of Geoaccumulation I_geo was computed, in order to investigate a possible enrichment of the surface sediments in metals. The analysis revealed again high values of I_geo class for both Pb and Zn. A careful study of the area, in relation to the quality of the catchment basins petrology, lead to a non-anthropogenic origin of these high concentrations. The enrichment of the surface sediments in Pb and Zn is attributed to the weathering of several mineral deposits, pyroclastic rocks and lavas, covering almost all Milos vicinity. A study of the geochemical data correlation coefficient matrix revealed three major groups of elements: (i) the elements of detrital origin represented by Si, Al, K and a part of the metals; (ii) the carbonates group; and (iii) a Fe–Mn oxyhydroxides–oxides group, which attracts a part of Pb, Cr and Ni.     

重庆朝天门长江大桥施工控制压重方案设计

朝天门长江大桥全长932 m,主桥为(190+552+190)m三跨连续单拱钢桁梁。结合主跨合龙特点介绍主跨合龙的思路、计算及操作要点,应用大型有限元分析程序MIDAS建立了朝天门长江大桥的三维有限元简化计算模型,并对其进行了施工过程控制分析。压重方案设计可以为同类桥梁的施工控制分析提供有益的思路。     

独立式和整体式货舱的沥青运输船技术特点分析

沥青船属于化学品船,在设计中必须充分考虑其特点,特别是货舱结构形式、船检规范也有特别要求,技术上有一定难点。文章以6200m^3独立式货舱沥青船和4999t整体式货舱沥青船的设计和建造为基础,对其货舱结构形式等的技术特点进行较全面的比较、分析介绍,为今后同类型船舶的建造提供有益的参考。     

关于散装化学品船安全运输的几点思考

本文分析了散装化学品的危险性和散装化学品船的特殊危险性,系统分析了散装化学品船安全管理中存在的主要问题,提出和总结了加强散装化学品船安全运输的几项措施。     

Modeling Feedback Scheme of Empty Cars in Unloading End of Heavy Haul Railway

The transportation organization of heavy haul railway is complex in China, especially, the feedback of empty cars. On the basis of reference to the existing research results, and deep analysis of the characteristics of empty cars distribution of heavy haul railway, the authors construct the feedback schematic model of empty cars in unloading end of heavy haul railway. The minimum quantity of the combined trains and the time for combination is taken as the model goal and solution algorithm on the basis of minimum cost and maximum flow is formulated. Daqin railway is taken as an example and relevant conclusions of feedback scheme of empty cars of heavy haul railway, through an analysis of calculation results, are drawn.     

Effect of handling characteristics on minimum time cornering with torque vectoring

In this paper, the effect of both passive and actively-modified vehicle handling characteristics on minimum time manoeuvring for vehicles with 4-wheel torque vectoring (TV) capability is studied. First, a baseline optimal TV strategy is sought, independent of any causal control law. An optimal control problem (OCP) is initially formulated considering 4 independent wheel torque inputs, together with the steering angle rate, as the control variables. Using this formulation, the performance benefit using TV against an electric drive train with a fixed torque distribution, is demonstrated. The sensitivity of TV-controlled manoeuvre time to the passive understeer gradient of the vehicle is then studied. A second formulation of the OCP is introduced where a closed-loop TV controller is incorporated into the system dynamics of the OCP. This formulation allows the effect of actively modifying a vehicle's handling characteristic via TV on its minimum time cornering performance of the vehicle to be assessed. In particular, the effect of the target understeer gradient as the key tuning parameter of the literature-standard steady-state linear single-track model yaw rate reference is analysed.