Tangential force variation due to the bogie direction reversal procedure

A range of tangential forces is generated within the contact patch when a wheelset moves on the rail. These forces are intensified when incorporating curved tracks and motored axle rail vehicles [Arrus, P., de Pater, A.D. and Meyers, P., 2002, The stationary motion of a one-axle vehicle along a circular curve with real rail and wheel profiles. Vehicle System Dynamics, 37(1), 29–58]. The wheelset is subject to flange contact if an unbalanced force remains in a curve towards the high rail gauge face. The resultant force in the transverse direction includes the lateral force, the radial force, and the creep forces in addition to the effect of the frequent wheelset displacement due to the kinematic oscillation [Iwnicki, S., 2003, Simulation of wheel–rail contact forces. Fatigue Fracture Engineering Material Structure, 26, 887–900]. This article has focused on a potential variation in some of the forces cited when the wheelset is subject to backward and forward movements. A severe wear rate observed within the wheel flange region in Iranian Railways was investigated by operating a test bogie on a curvaceous track. An obvious improvement in the wear rate and wear pattern of the wheels was attained when the second test bogie encountered a bogie direction reversal procedure. This enhancement is considered in this article from the force analysis standpoint.     

地铁运营对古建筑物振动响应影响分析

以南昌地铁1号线诱发的环境振动对"八一起义纪念馆"影响为工程背景,运用傅里叶变换法和有限元软件ANSYS,分别建立列车-轨道结构双层梁模型和大地-建筑物有限元模型。以水平速度为评价指标,仿真分析轮轨竖向力作用以及竖向力和横向力共同作用对古建筑物的振动影响。计算结果表明,地铁引起的建筑物振动为低频振动;随着楼层的增加,建筑物水平振动逐渐增大;横向力对建筑物的振动能量分布没有影响,对水平振动有一定的影响,其中对x方向影响较大;该建筑物振动没有超过标准。     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

斗轮式取料机行走位置精确定位

斗轮式取料机行走位置校正装置在定位中起到很重要的作用.分析了原有行走机构定位原理与状况.介绍了新定位装置的设计思路和实施方案,改革后提高了全场设备相互协同的效率和相互保护的可靠性.     

发动机带传动中皮带寿命提高方法研究

设计一种新型的通用皮带预紧力测量装置，通过分析发动机皮带传动中的横向振动，提出带轮结构布置原则。实验证明，根据该原则进行皮带轮结构布置并设定准确的皮带预紧力，可减小传动打滑现象，有效提高皮带的使用寿命及皮带传动效率.     

Mathematical modelling of train–turnout interaction

The paper proposes a mathematical model of train–turnout interaction in the mid-frequency range (0–500 Hz). The model accounts for the effects of rail profile variation along the track and of local variation of track flexibility. The proposed approach is able to represent the condition of one wheel being simultaneously in contact with more than one rail, allowing the accurate prediction of the effect of wheels being transferred from one rail to another when passing over the switch toe and the crossing nose. Comprehensive results of train–turnout interaction during the negotiation of the main and the branch lines are presented, including the effect of wear of wheel/rail profiles and presence of track misalignment. In the final part of the paper, comparisons are performed between the results of numerical simulations and line measurements performed on two different turnouts for urban railway lines, showing a good agreement between experimental and numerical results.     

大瑞铁路老红坡隧道穿越接触带单侧涌泥处理技术

大瑞铁路老红坡隧道穿越可溶岩与非可溶岩接触带施工单侧发生涌泥大变形地质灾害。通过分析变形开裂及地质成因，正洞内采用迂回导坑方案探明涌泥体范围，采用洞内扩挖工作洞室，在隧道单侧轮廓外施作超前水平注浆+高压水平旋喷桩加固及超前水平长大管棚的方案进行处理，并对该段支护及衬砌结构调整加强。依据现场工况，采用三台阶法分部、分段拆换作业，在钢架拱脚增设临时仰拱或临时横撑控制收敛变形，及时施作格栅钢架模筑衬砌，变形稳定后再施作永久二次衬砌。该技术在大瑞铁路老红坡隧道单侧突泥涌水地质灾害处治施工实践中得到了成功应用，取得了良好效果。     

郝家村隧道水平岩层坍塌整治技术

结合郝家村隧道施工实例,首先阐明了研究水平岩层垮塌整治的必要性,然后介绍了隧道工程区域内的工程概况及水文地质条件。在此基础上对郝家村隧道水平岩层的地质特征以及工程特性进行了研究分析,指出了围岩变形垮塌的演化机制和破坏机理。最后对坍塌段的整治原则、开挖方法、支护措施、监控量测技术进行了探讨,并针对郝家村隧道的具体情况,给出了相关隧道施工的注意事项。     

重载货车车轮踏面垂直磨耗原因分析及改进

分析总结了大秦线重载货车车轮磨耗的原因,并针对解决大秦线车轮非正常磨耗提出几点建议。     

化马隧道涌水处理浅析

化马隧道涌水为高压宽张岩溶裂隙水,具水量大,压力高,涌水连续、贯通性好、补给水头稳定等特点。通过详细地质勘探、水文地质条件分析及准确地质超前预报,掌握了涌水的特点和性质,提出了采用迂回导坑绕避结合泄水洞排水的处理方案,顺利通过了隧道涌水段。