液压式盾构/TBM主机平移-空推集成装置的研制

研究目的:目前,隧道掘进机平移与空推工艺多采用不同装置分步完成,装置安装耗时费力,严重影响项目施工进程,且国内外没有可同时解决掘进机主机平移和空推的工法或装置。本文研制了一种基于液压的盾构/TBM主机平移-空推集成装置,将平移与空推工序合一,可极大提高工程施工效率,实现荷载600 t盾构/TBM主机连续移位。研究结论:(1)利用液压力驱动液压马达实现装置移位和驱动轮90°转向,实现了平移与空推工艺集成;(2)多轮系和从动轮碟簧设计可优化载荷分布,从动轮选用自润滑推力关节轴承使装置可适应一定倾斜度和不平度,提升装置运行平稳性;(3) 600 t荷载下,利用聚氨酯包敷于钢轮外的复合轮设计减小了轮系与地面接触应力,降低地面要求;(4) ANSYS仿真分析表明承载台架满足强度要求;(5)目前该装置已成功应用于青岛地铁8号线项目,缩短工期20 d,填补了国内外技术空白,应用前景广阔。     

船舶推进同步电机PTI/PTO模式研究

PTI/PTO推进是最近发展起来的一种新型船舶推进方式,兼具传统柴油机推进和电力推进优点,可实现多种船舶工作模式,具有操控性好、安全、经济等特点,将是未来船舶推进方式发展方向之一.本文介绍了PTI/PTO推进模式理论和工作模式,便于理解该推进方式,希望有助于船舶推进技术的发展.     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

Socially optimal electric driving range of plug-in hybrid electric vehicles

This study determines the optimal electric driving range of plug-in hybrid electric vehicles (PHEVs) that minimizes the daily cost borne by the society when using this technology. An optimization framework is developed and applied to datasets representing the US market. Results indicate that the optimal range is 16 miles with an average social cost of $3.19 per day when exclusively charging at home, compared to $3.27 per day of driving a conventional vehicle. The optimal range is found to be sensitive to the cost of battery packs and the price of gasoline. When workplace charging is available, the optimal electric driving range surprisingly increases from 16 to 22 miles, as larger batteries would allow drivers to better take advantage of the charging opportunities to achieve longer electrified travel distances, yielding social cost savings. If workplace charging is available, the optimal density is to deploy a workplace charger for every 3.66 vehicles. Moreover, the diversification of the battery size, i.e., introducing a pair and triple of electric driving ranges to the market, could further decrease the average societal cost per PHEV by 7.45% and 11.5% respectively.     

基于小波和粒子群算法的HEV行驶状况辨识方法研究

针对混合动力汽车(HEV)行驶状况(道路坡度和整车载荷)变化难以有效识别,导致驱动系统控制策略不能有效满足驾驶员意图问题,以混联式HEV为研究对象,提出了基于小波滤波和粒子群算法的HEV行驶状况辨识方法。首先建立了汽车行驶状况辨识模型,采用最小二乘法确立了优化目标函数,其次研究了基于小波滤波和粒子群算法的HEV行驶状况辨识原理,最后进行了行驶状况粒子群智能算法辨识试验。在采集实车数据的基础上,对实车数据进行小波滤波,并运用行驶状况辨识方法对道路坡度和整车载荷进行了辨识,并对辨识结果进行小波滤波,结果表明,试验工况下整车载荷辨识的相对误差绝对平均值为2.71%,道路坡度辨识的相对误差绝对平均值为3.85%,验证了所提出方法的有效性。     

改进的免疫模拟退火算法求解混合流水车间调度问题

针对混合流水车间调度问题的特点,设计了一种双层编码和解码的方法,在一定程度上扩大了可行解的搜索范围,为了克服传统免疫算法在初期收敛速度慢的问题,在算法的早期应用特定的变异算子,以期提高收敛速度,为避免算法陷入局部最优解,在算法后期,利用模拟退火算法的随机扰动性,引导算法跳出局部最优解,同时还引入了免疫记忆,运用精英保留策略预防最优解的丢失,最终提出了一种改进的混合免疫算法.通过仿真结果表明了该算法在解决混合流水车间问题上的可行性和有效性.     

冰区航行船舶电力推进轴系机电耦合的扭振分析

通过螺旋桨桨叶与冰块的相互作用过程,建立单冰块对螺旋桨扭转振动的激励函数;同时建立机电耦合振动数学模型,推导得到机电耦联动力学方程,研究电机电磁激励力对扭转振动的影响。以3500吨科考船电力推进轴系为研究对象,基于冰载荷激励力和电磁激励力对轴系扭转振动进行分析,为复杂的船舶电力推进轴系在冰区航行时的振动研究奠定了基础。     

喷水推进船航速预报的动量通量试验技术发展现状

喷水推进是与中高速船舶相匹配的一种具有时代特征的先进推进方式,显著提高了船舶的快速性与操纵性,广泛应用于国内外高性能船舶。开展基于动量通量的试验技术研究,可有效提高喷水推进船舶航速预报精度,促进喷水推进技术快速发展与应用。本文在梳理喷水推进船模自航试验研究成果的基础上,分析了当今国际上喷水推进自航试验主流方法"动量通量法"的原理与关键技术以及应用状况,对航速预报精度有显著影响的流量、进出口动量通量的测量方法以及喷水推进装置对船体的作用等参数的测量方法进行了归纳,在此基础上针对国内外的差距,提出了我国发展相关技术的建议。     

基于T-S模糊模型的船舶推进系统故障诊断研究

基于船舶推进系统基准(SPSB)测试平台,建立了船舶推进控制系统的T-S模糊模型,结合满意控制理论,通过模糊化与反模糊化将船舶推进系统分成多个局部子系统,给出了各局部子系统在执行器恒偏差故障下,满足多个性能指标约束的故障诊断观测器设计方法。利用Simulink工具箱建立了仿真模型,验证了船舶推进控制系统多性能指标约束下故障诊断观测器的正确性与有效性,为船舶推进系统的故障诊断提供了新的思路。     

冰载荷冲击下的船舶推进轴系瞬态扭转振动响应分析

传统的推进轴系扭转振动响应计算聚焦于稳态响应,而传递矩阵法、系统矩阵法,可以取得满意的稳态计算结果,但无法处理冰区船舶、海洋工程船舶所遇到的变载荷、变惯量等瞬态工况。为了克服频域扭振计算方法在处理瞬态条件扭振问题的局限性,使用 Newmark 法从时域求解轴系扭转振动微分方程组,基于该算法对某船推进轴系在冰载荷作用下的瞬态响应做了数值计算。其结果表明,在冰载荷冲击下,轴系瞬态扭矩比稳态扭矩大;通过时频分析,在冰载荷作用期间,出现了明显的螺旋桨叶频激励,因此须避免冰载荷激励产生轴系扭转振动的叶次共振。 Newmark 法扭振计算结果与实船测试结果对比表明,该方法在稳态响应计算和时域曲线上都与实际测量结果基本一致,具有工程实用性。