地铁牵引功率模块测试系统设计

地铁牵引系统主要由牵引逆变器提供动力,牵引功率模块是其中的核心主电路部分。介绍了一种地铁牵引系统功率模块测试系统设计思路及参数计算,给出了测试系统的硬件和软件设计方法。通过静态脉冲测试和动态脉冲测试可以看出,设计的测试系统可较为精确地测量到地铁牵引逆变器功率模块每个桥的桥臂IGBT(绝缘栅双极晶体管),且其实测值与理论计算值接近。该测试系统较为适合现场测试和验证功率模块的整体性能。     

An exploratory investigation of the impact of ramp metering on driver acceleration behavior

Ramp metering has been proven as an effective freeway management strategy; however, the impact of ramp metering on drivers' acceleration behavior has not been fully investigated. A better understanding of acceleration behavior changes with ramp metering is critical to the adequate design of ramp metering facilities. In this study, drivers' speed and acceleration data were collected at two representative metered ramps in Los Angeles, California. The speed and acceleration profiles under meter-on and meter-off scenarios were compared. Statistical results demonstrated that ramp metering affects drivers' acceleration behavior at ramp acceleration lane. It was found that at the metered ramp with short existing acceleration length, the average acceleration rate from ramp meter stop bar to 500 ft downstream under meter-on scenario (4.72 ft./s²) is approximately 40% higher than when meter-off (3.18 ft./s²). The design of acceleration lane length for metered on-ramps should therefore take into account the potential impacts of ramp metering on driver acceleration behavior.     

靶场试验指挥控制中心系统及其应用

针对靶场试验指挥控制中心的应用需求，介绍靶场试验指挥控制中心系统的功能、特点以及体系结构和组成，分析系统研制的关键技术，说明该系统的应用范围。目前，该指控中心系统已成功地应用于某大型武器系统靶场试验中，取得了较好效果。     

Integrated coastal water monitoring

Geographical Information Systems (GIS) are important took for environmental monitoring and management. However, their limitations in dealing with complex, dynamic, and mission‐critical situations call for alternative approaches. Integrating GIS with dynamic simulation models offers one such solution. Numerical models that simulate physical, chemical, and biological processes greatly increase our understanding of the environment. Many of these models use refined forecast information to accurately predict processes that help in monitoring and managing the environment. Integrating these models with GIS offers new functionalities. The present research couples the MIKE21 comprehensive modeling system for two‐dimensional free surface flows with the spatial analysis strengths of the ArcView GIS. The southern coastal water system of Singapore serves as the study area. The aim is to develop a comprehensive software system that provides support for both environmental managers and land‐use planners in making their decisions.     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

海上安全信息船舶收听率统计方法研究

通过对海岸电台覆盖范围内船舶接收安全信息情况的统计，可获知信息中心发布的信息资源的利用率，有利于工作人员选择合适的播发方式播发海上安全信息以获取更高的信息覆盖面。以统计学理论为基础建立了一种海上安全信息船舶收听率统计模型，并以实例进行分析，验证了所提模型的可靠性和实用价值。     

汽车碳排放检测能力建设及评价方法研究

结合现有检测能力，顺利完成了碳排放检测能力的改造，测试水平满足欧Ⅴ、欧Ⅵ的要求，达到国际先进、国内一流水平；研究了传统动力汽车碳排放评价方法，针对某公司某轻型客车燃料消耗量偏高的问题，提出了有针对性的降低碳排放的措施，并进行了试验验证。     

Real-time model predictive control of connected electric vehicles

ABSTRACT

Electric Vehicles (EVs) motors develop high torque at low speeds, resulting in a high rate of acceleration with the added advantage of being fitted with smaller gearboxes. However, a rapid rise of torque in EVs fitted with central drive powertrains can create undesired torsional oscillations, which are influenced by wheel slip and flexibility in the halfshaft. These torsional oscillations in the halfshaft lead to longitudinal oscillations in the vehicle, thus creating problems with regard to comfort and drivability. The significance of using wheel slip in addition to halfshaft torsion for design of anti-jerk controllers for EVs has already been highlighted in our previous research. In this research, we have designed a look-ahead model predictive controller (LA-MPC) that calculates the required motor torque demand to meet the dual objectives of increased traction and anti-jerk control. The designed LA-MPC will improve drivability and energy consumption in connected EVs. The real-time capability of the LA-MPC has been demonstrated through hardware-in-the-loop experiments. The performance of the LA-MPC has been compared to other controllers presented in the literature. A validated high-fidelity longitudinal-dynamics model of the Rav4EV, which is the test vehicle of our research has been used to evaluate the controller.     

建设项目交通影响费取值研究

随着对交通问题认识和研究的深入,交通影响分析的思想越来越受到国内交通规划学界和交通工程专家的重视。尤其是交通影响费的取值问题已越来越为专家学者和TIA工作者所关注,这是因为交通影响费是协调项目建设与交通之间关系、控制交通需求的有效手段。而如何根据中国的实际情况收取交通影响费始终是交通影响费理论研究和实际工作中需要解决的重点问题。该文在总结归纳目前国内外常用交通影响费取值方法的基础上,提出了适合我国的费用计算方法。在兼顾公平与效率的基础上,建立了交通影响费分摊优化模型,并以算例说明模型的应用方法。     

深基坑双排桩结构受力变形机理及其计算模型研究

近年来,为了适应国内城市地下工程建设蓬勃发展带来的地下工程密集化、复杂化等方面的需要,深基坑开挖时双排桩围护结构因具有侧向刚度大、控制变形能力强、施工快速等特点在各种大型深基坑工程中得到了较为广泛的推广和应用。但实际设计过程中,由于该结构的变形机理与计算模型尚未有统一的理论,其设计方法比较杂乱,存在一定程度的保守设计。依托南京梅子洲青奥城地下空间工程及其现场监测数据,采用有限元计算模型对近年来在地下工程中逐渐得到推广使用的双排桩围护结构的变形机理、土压力分布规律等进行探讨和研究;在此基础上,结合与目前广为应用的理正双排桩模型和新规范双排桩模型的对比分析,研究并提出更吻合实际的、精确反映结构变形和力学特性的双排桩围护结构的修正设计计算模型,该模型架构清晰,准确性高,贴近实际工程设计,可以大力推广应用于双排桩结构的计算分析。