Toward an SCA-OSGi based middleware for radio frequency identification applications

The radio frequency identification (RFID) technology progressing is becoming a increasing interest in several application areas. To accommodate diverse and changing requirements from applications,RFID middleware should be reconfigurable. However,current RFID middleware is limited in its ability to support reconfiguration. To solve this problem,we adopt the service-oriented component-based approach in building the middleware. Component-based design enables decomposition of middleware functionality and is eas...     

厦门市基础测绘成果生产技术分析

城市基础测绘一图多用的方法不但能够提高工作效益和经济效益,同时可加快地理空间基础框架的架设。以具体项目为例,完成对厦门市基础测绘成果生产技术分析,以期为新一轮的基础测绘建设启动提供技术保障。     

基于复合混合物理论的热-水力-力学污染物输运模型

污染物在饱和可变形多孔介质中的输运问题属于多场耦舍的范畴．为模拟含N种组分的液相污染物在可压缩固相多孔介质中的输运过程,在复合混合物理论的基础上将体积分数作为内变量引入,提出并建立了可压缩多孔介质中多组分污染物热．水力-力学耦合输运问题的热力学框架．将体积分数看作独立变量用于描述介质的微观结构,并形成动力相容条件来描述由多组分流体饱和的可压缩多孔介质界面处应力突变的微观力学机制．根据近平衡态理论以及线性化方法得到基于上述理论框架的线性化热．水力-力学耦合污染物输运模型．所提出的模型是在公理系统基础上建立的,榆运过程中的渗流和扩散过程最终可表示为与相的密度梯度、组分浓度梯度、体积分数梯度及温度梯度有关的形式,实现了多种因素的耦合．     

骨架密实型水泥稳定碎石组成设计方法研究

通过振实试验确定水泥稳定碎石混合料中粗集料的级配;对不同i值所对应级配的细集料进行强度、CBR、干燥收缩和温度收缩等试验,确定细集料的级配;以强度为指标确定粗、细集料比例,并根据贝雷法参数检验,可确定骨架密实型水泥稳定碎石的集料级配。最后,通过路用性能试验对骨架密实型水泥稳定碎石混合料进行检验的结果表明：骨架密实型水泥稳定碎石混合料的各项路用性能指标均优于规范级配的水泥稳定碎石混合料的性能指标。     

Analysis of Key Factors in Cable Force Calculation for Cable-Stayed Bridges

Three methods for calculating cable force (analytic method, fitting method and finite element method) are analyzed and compared. The effects of boundary condition, spectrum resolution, sampling time, and number of sampling points on the precision of cable force identification are discussed, and error analysis is conducted. The results of three methods applied to a practical project are significantly less than the design value. Comparatively, the result of finite element method is the closest to the design value. Moreover, their computational precision and error are compared and analyzed. The precision of frequency identification of cables, long cables in particular, is strongly affected by frequency resolution. If the frequency resolution is included in calculating the cable force, the identification error can be reduced greatly.     

Watermark in the digital video broadcasting handheld transmission signal

Transmitter identification (TxID) technique is used to diagnose the operation status of radio trans-mitters in DTV distributed transmission network. A new TxID method for digital video broadcasting-handheld (DVB-H) system is proposed. Watermark is embedded in the DVB-H signal to form the composite signal. Ac-cording to watermarking theory we demonstrate the required signal level for watermarking signal to achieve given bit error Probability under different circumstance. By selecting the reference pattern to generate watermarking signal, peak-to-average power ratio (PAPR) of the transmitted signal can be improved. Simulation results show that even in wireless situation the receiver can distinguish the watermarking signal with low embedding strength, and distortion to the host signal can also be ignored.     

Time-varying performance prediction and system identification of internal combustion engines

Design for life-time performance and proper maintenance measures are usually needed to prolong the mean-time-between-failures of complex equipments such as internal combustion engines. To reach this, it is important to obtain the information of time-varying system performance in design stage and to identify the structural change at each moment. So a multidisciplinary model based method is studied in this paper to unify the time-varying performance(TVP) prediction and system identification(SI) of equipments. The related multidisciplinary model in this paper should be not only precise to give simulation results but also sensitive to the variation of system parameters. So the varying history of system performance along with the structural change can be obtained from the model. Then the value of system parameters can be identified by seeking roots with given detected responding data and relationship between system responding data and system parameters. A case study on a low power gasoline engine shows that the method presented in this paper can provide useful information for the development and maintenance of complex equipments.     

桩基桥墩的静力推倒分析

该文根据日本铁道抗震设计规范建立了考虑桩构件及地基非线性的杆系有限元模型,分析了某客运专线上的桩基础的水平极限承载能力,并与我国规范m法的计算结果进行了比较。分析结果表明:当墩顶水平力较大时,随着桩侧地基土水平及竖向抗力不断进入塑性,中日两国规范计算的结果相差较大;考虑桩土相互作用的墩顶水平力-位移的骨架曲线可用三线性描述。该分析结果可为罕遇地震下桩基础的抗震分析提供理论依据。     

红河高墩连续刚构桥的优化设计

红河大桥为连接某复建公路的特大桥,根据地形条件的特点,桥梁主桥设计为主跨220 m的预应力混凝土连续刚构桥,主梁采用单箱单室变高度截面,三向预应力体系.为使主桥结构的设计更加合理,对主跨单箱单室截面的腹板厚度、预应力钢束的布置形式等进行了优化设计.通过比较分析优化前后结构在施工、运营阶段的力学性能、主梁挠度及动力性能,进而得到优化对施工、运营阶段结构的力学性能、主梁挠度及结构整体动力性能的影响.     

基于粗糙集属性约简的异步电机速度模型结构辨识

提出了一种针对决策信息系统的属性约简方法,并将其应用到异步电机速度模型结构辨识上.同时,讨论了去除离散化数据中不一致规则的方法.结果表明,约简之后的速度模型结构与实际调速系统中影响电机转速的因素相符合,从而表明该算法是有效的.