深圳地铁永磁同步牵引系统研究分析

牵引传动系统是轨道交通车辆装备实现机电能量转换的“心脏”单元,其性能在某种程度上决定轨道交通车辆的动力品质、能耗和控制特性,是轨道交通车辆节能升级的关键系统。而永磁同步牵引系统以其高效率、高可靠性和低能耗的优势特点,受到轨道交通行业的密切关注。文章阐述深圳地铁10号线永磁同步牵引系统批量装车概况,重点分析永磁同步牵引系统组成及优势,指出推广应用永磁同步牵引系统的经济和社会效益显著。     

基于生长曲线函数的货车运营环节碳达峰研究

货车是我国大气环境污染的重要来源之一，也是影响我国碳达峰总体目标实现的重要因 素。本文从货车运营环节入手，在运用生长曲线函数对货车保有量进行预测的基础上，对不同类 型货车的保有量和单车碳排放变化进行研究，并从货车节能技术发展、新能源货车推广和应用进 程两方面入手，分3种情景对货车运营环节中产生的碳排放总量趋势进行预判，推演货车运营环 节的碳达峰时间。研究结果表明，只有同时加快货车节能技术发展以及新能源货车推广和应用 进程，货车运营环节中产生的碳排放总量规模才能得到有效抑制并逐渐减少。若到 2030 年货 车单车燃料消耗水平较 2019 年降低 20%以上，新能源货车在货车整体保有量中的占比达到 20%，到 2060 年货车单车燃料消耗水平较 2019 年降低 50%，新能源货车占比达到 50%，则货车 运营环节碳达峰时间将缩短至2030年左右实现，2030年后货车运营环节产生的碳排放总量规 模将逐渐减少。     

冲压机械振动对高铁桥梁及行车动力影响分析

高速铁路桥梁的平顺性和稳定性对运营列车的平稳性和安全性有很大影响。为研究冲压机械产生的外部振动激励对高铁桥梁的影响,首先通过对此机械引起的地面振动进行实测,并结合有限元分析软件,确定最大冲击荷载作用下产生的地面振动及传播至桥墩处的振动;然后通过建立列车-轨道-桥梁耦合动力学模型,将桥墩处的地面振动作为激励输入,分析列车以不同速度通过时车辆、桥梁动力学响应。结果表明:地面冲击振动有限元模型计算结果与实测结果基本相符,验证了模型的可靠性;地面振动对桥梁响应会产生一定的影响,距振源50 m处地面振动对桥梁所产生的影响较距振源80 m处(桥墩处)的大,但对运行车辆的影响很小;随着车速由250 km/h至350 km/h,车辆及桥梁各结构的动态响应均有所增大,但都未超出安全限值。因此,冲压机械冲击作用导致的地面振动对列车-轨道-桥梁系统动态服役性能影响非常有限。     

Can we reliably assess climate mitigation options for air traffic scenarios despite large uncertainties in atmospheric processes?

Air traffic has an increasing influence on climate; therefore identifying mitigation options to reduce the climate impact of aviation becomes more and more important. Aviation influences climate through several climate agents, which show different dependencies on the magnitude and location of emission and the spatial and temporal impacts. Even counteracting effects can occur. Therefore, it is important to analyse all effects with high accuracy to identify mitigation potentials. However, the uncertainties in calculating the climate impact of aviation are partly large (up to a factor of about 2). In this study, we present a methodology, based on a Monte Carlo simulation of an updated non-linear climate-chemistry response model AirClim, to integrate above mentioned uncertainties in the climate assessment of mitigation options. Since mitigation options often represent small changes in emissions, we concentrate on a more generalised approach and use exemplarily different normalised global air traffic inventories to test the methodology. These inventories are identical in total emissions but differ in the spatial emission distribution. We show that using the Monte Carlo simulation and analysing relative differences between scenarios lead to a reliable assessment of mitigation potentials. In a use case we show that the presented methodology can be used to analyse even small differences between scenarios with mean flight altitude variations.     

Traffic and emissions impact of congestion charging in the central Beijing urban area: A simulation analysis

Congestion charging is being considered as a potential measure to address the issue of substantially increased traffic congestion and vehicle emissions in Beijing. This study assessed the impact of congestion charging on traffic and emissions in Beijing using macroscopic traffic simulation and vehicle emissions calculation. Multiple testing scenarios were developed with assumptions in different charging zone sizes, public transit service levels and charging methods. Our analysis results showed that congestion charging in Beijing may increase public transit use by approximately 13%, potentially reduce CO and HC emissions by 60–70%, and reduce NOx emissions by 35–45% within the charging zone. However, congestion charging may also result in increased travel activities and emissions outside of the charging zone and a slight increase in emissions for the entire urban area. The size of charging zone, charging method, and charging rate are key factors that directly influence the impact of congestion charging; improved public transit service needs to be considered as a complementary approach with congestion charging. This study is used by Beijing Transportation Environment and Energy Center (BTEC) as reference to support the development of Beijing’s congestion charging policy and regulation.     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Layout optimization of an inertial energy harvester for miniature underwater mooring platforms

Comprehensive analyses of the layout influence on power performance of a low-frequency miniature horizontal-pendulum-type inertial energy harvester for underwater mooring platforms are presented in this article. The mathematical models are obtained utilizing the Newton-Euler method. The power performance is evaluated by simulations over different parameters, such as damping, excitation frequency, and layout position. Simulation results indicate that the harvester can extract energy from low-frequency excitations over the range of 0.1 Hz–0.4 Hz, and maximum output power can reach to 0.7 W under excitation frequency f = 0.4 Hz. Different layout positions influence the energy harvesting performance of the harvester dramatically. Changing the layout position to positive value can enhance and broaden the power performance. The amplitude responses with different layout positions do not show resonant characteristics, even near the natural frequency of the harvester, due to large amplitude vibrations and strong nonlinear characteristic. As excitation frequency f = 0.4 Hz, there is a zero output power point appears at layout position d = −1.3 m. Moreover, the harnessed power has a quadratic relationship with the layout position value.     

基于云平台的城市轨道交通能源管理系统

阐述了基于云平台的城市轨道交通能源管理系统架构和建设方式。该系统利用云计算的高效和弹性来部署建设,采用线网-车站二层管理模式,降低了线网和线路服务器等的硬件部署成本和维护成本。通过将能源管理系统内部使用的业务应用转换为基于云平台的能源管理应用软件,能源管理系统可获取云平台提供的共享数据,并将经过业务处理后的数据存储到云平台中,以服务于云平台上其他业务,实现了数据资源的逻辑统一和高效利用。     

船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。     

基于FLAC软件模拟强夯加固吹填砂地基

基于港区陆域吹填项目,采用FLAC软件建立三维模型,模拟了不同夯能、夯击次数对强夯效果的影响,对强夯前后杨氏模量的变化进行了分析研究。结果表明,表层吹填砂厚度和下卧软土层分布对夯能的大小起着决定作用。对于下卧松散砂层,可适当加大夯击能量和夯击次数(7~8击),增加其处理深度和效果;而对于下卧软黏土层,可以适当减小夯击能量并增加夯击次数,以提高加固效果。夯击之后,表层吹填砂的杨氏模量有较大的提高,从原来的10 MPa提高到20~40 MPa。