压载荷下骨材贯穿孔孔边应力集中模型试验

以船舶双层底结构为研究对象开展模型试验,研究板材中的开孔在承受压力载荷作用下的孔边应力分布情况,分析压力载荷下不同开孔孔型以及不同补强结构对孔边应力分布情况的影响。在此基础上,开展相关仿真分析,将试验结果与有限元仿真结果进行对比,验证有限元仿真的准确性。     

大深度浮力驱动式水下运载器的浮潜运动研究

基于模型试验,对大深度浮力驱动式水下运载器的上浮运动进行研究与分析,基于数值仿真,提出大深度浮力驱动式水下运载器浮潜运动的快速预报方法,并将预报结果与模型试验结果进行对比,证明快速预报方法的准确性。使用快速预报方法,针对水下运载器比重变化、流体密度变化、水下运载器初速度以及水流扰动4种因素对浮潜运动的影响进行研究.此外,对水下运载器作六自由度运动时所受的水动力进行计算,为后续的六自由度运动预报和研究提供基础。     

双月池对某援潜救生船运动性能及波面升高的影响

介绍某援潜救生船配设双月池的船型特点,规划双月池和不带月池2种方案来评估双月池开口对援潜救生船船体运动性能的影响。采用三维势流理论对2个方案的运动性能进行计算,得到船体运动响应函数,对船舶运动性能进行短期预报,研究总结双月池效应对援潜救生船运动的影响规律。对比双月池内水面和舷外波面升高的情况,比较两个位置处波面升高的差异性,总结双月池波面升高对潜水钟收放的影响。     

潮流泥沙数值模拟在潍坊港规划中的应用

将潮流泥沙数学模型应用于潍坊港总体规划方案比选研究。采用MIKE21软件建立潍坊港二维潮流泥沙数学模型,对总体规划的各项方案进行水流、地形冲淤、航道回淤等方面的数值计算,并进行方案间的比较分析。研究结果表明,各方案工程实施后流场无明显差别,周边地形冲淤变化不大且差别较小;航道回淤是该区域规划方案选择的关键因素,整体发展方案明显优于分离式方案;经多方面考虑离岸岛堤式方案尚不可行。     

单侧边载作用下黏土中单桩负摩阻力特性模型试验研究

桩基础边载作用会在桩周产生负摩阻力,进而危及软土地区高桩码头、人工岛、路基等工程的安全。通过开展黏土中单侧堆载作用下单桩室内模型试验,测定桩身应变、桩顶沉降和水平位移,研究边载作用距离和桩型对桩身轴力及弯矩的影响,探讨桩身负摩阻力、桩顶沉降和水平位移在黏土固结过程中的时间效应。结果表明:边载作用距离对桩身最大轴力和最大弯矩有较大影响;翼板桩会增加桩身最大轴力和最大弯矩;负摩阻力和有效应力系数随时间增长且增速趋缓;增加边载作用距离和添加翼板都会提升桩身中性点位置,在这两组试验中均提升了8.33%。     

特大型耙吸挖泥船研制及工程应用

针对特大型耙吸挖泥船多工况、大舱容、大挖深、精确与高效控制及良好的航行性能等问题,进行船型、系列化耙头、高效泥泵、耙臂泵和控制系统的研究。采用理论研究、大比例尺模型试验、实船验证等多种研究方法,解决了限制特大型耙吸挖泥船国产化的技术瓶颈。在上述研究成果的基础上,设计建造了2艘特大型耙吸挖泥船,两船服务于我国多个重大港口航道工程,经济和社会效益显著。     

不同间隙比竖井内水流与平衡重二维流固耦合

目前,水力式升船机在国内外尚无投入实际运行,无实际设计、安装、运行经验可循。建立不同间隙比竖井与平衡重之间二维流固耦合数学模型,在非恒定流作用下,对不同间隙比时平衡重上升过程的水动力响应进行动态模拟。得出有利于该类升船机稳定运行的最优间隙比。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Emission rates of intermodal rail/road and road-only transportation in Europe: A comprehensive simulation study

Intermodal rail/road transportation combines advantages of both modes of transport and is often seen as an effective approach for reducing the environmental impact of freight transportation. This is because it is often expected that rail transportation emits less greenhouse gases than road transportation. However, the actual emissions of both modes of transport depend on various factors like vehicle type, traction type, fuel emission factors, payload utilization, slope profile or traffic conditions. Still, comprehensive experimental results for estimating emission rates from heavy and voluminous goods in large-scale transportation systems are hardly available so far. This study describes an intermodal rail/road network model that covers the majority of European countries. Using this network model, we estimate emission rates with a mesoscopic model within and between the considered countries by conducting a large-scale simulation of road-only transports and intermodal transports. We show that there are high variations of emission rates for both road-only transportation and intermodal rail/road transportation over the different transport relations in Europe. We found that intermodal routing is more eco-friendly than road-only routing for more than 90% of the simulated shipments. Again, this value varies strongly among country pairs.