波浪作用下30万吨级油轮撞击能量研究

通过物理模型试验,研究不规则波作用下30万吨级油轮撞击能量,分析了主要影响因素HT、LB、TT0、D对撞击速度的影响规律。结果表明:撞击速度与HT成正比;与LB成幂次关系;与TT0也成正比,但TT0=1时船舶撞击码头与波浪产生共振,撞击速度出现极大值;压载时的撞击速度大于满载时的撞击速度,撞击速度与吃水成负相关。提出了30万吨级油轮撞击能量的计算公式,与青岛港原油码头三期工程和青岛益佳集团燃油码头工程的物理模型试验结果对比,具有较好的计算精度,可供工程设计参考。     

Numerical simulation of three-dimensional breaking waves

Three-dimensional (3D) wave breaking around bodies of complex geometry has been numerically investigated by use of two types of Navier-Stokes solvers, namely the finite-difference and the finite-volume methods employing rectangular and curvilinear coordinate systems, respectively. Both methods employ the density-function technique to capture the free surface location and can cope with complicated free surface configurations such as breaking waves. The accuracy of the density-function method is examined through the comparison with experimental results, and it is confirmed to be satisfactory when the grid spacing and the time increment are sufficiently small. New computational methods are applied to several problems including 3D breaking waves around ships and wave diffraction around offshore structures. The computed results show good agreement with experimental results indicating that wave breaking phenomena are successfully simulated. The qualitative accuracy, however, could be improved by including the dissipating effect of breaking waves.     

Free Propagation of Wave in Viscoelastic Cables with Small Curvature

IntroductionDynamicbehaviorsofcablesandcable structureshaveattractedtheattentionofmanyresearchers .Therehavebeenmanyreports[1 5 ] ontheproblemsofnaturalfrequencies ,freevibrations,andstabilitybehaviorsofcablesandcablestructures .Manyavailabletechniques ,s…     

城市道路不规则交叉口渠化设计

不规则交叉口是城市交通的瓶颈,合理的渠化设计是提高不规则交叉口通行能力的重要途径,但国内针对不规则交叉口渠化的研究较少,且缺乏系统性。文章分析了不规则交叉口渠化的基本思路,从交通调查、现状问题分析、渠化设计及方案评价等4个方面提出了不规则交叉口渠化的基本步骤．并结合VISSIM仿真软件对渠化方案进行评价,论证方案的合理性。     

实船耐波性试验数据快速分析方法研究

针对实船耐波性试验数据不规则性强、数据量大的特点,研究了包括有效数据采样、数据中心化、快速傅里叶变换（FFT）、幅值统计分析等环节在内的耐波性试验数据快速分析方法,成功开发耐波性试验数据分析系统,直接由原始试验结果分析得到舰船在海浪中的运动响应幅度统计值,并将原始记录及分析结果的曲线和数据导出,生成Excel等形式的文件,大大简化了试验数据处理过程,提高了效率。     

近水面椭球体非线性兴波的数值模拟

本文开发了一种去奇异面元法用于计算以定常前进速度运动的近水面椭球体引起的三维非线性自由面势流.采用求解非线性深水波的Stokes理论求解该定常非线性问题;物面用NURBS(非均匀有理B样条)表达;孤立的Rankine源分布在物体内部和自由面上方.给出了波型、波阻以及收敛特性随一些参数的变化规律.波阻计算结果和他人的其它数值结果进行了比较,其吻合程度令人满意.     

不规则波中二阶辐射问题时域数值模拟

能够有效地模拟不规则波中非线性的波物相互作用是深海工程领域一直关心的热点问题,因此有必要采用时域理论对不规则波中非线性的波物相互作用进行研究和分析。对自由面和物面条件进行Taylor 级数和Stokes摄动展开得到一阶和二阶边值问题。使用基于Rankine源的边界元法计算每一时刻的流场,并在自由面上采用积分格式的自由面条件;在远方控制面上采用多次透射边界条件以及其耦合阻尼区的边界条件;对做不规则垂荡运动的截断圆柱所受到的水动力进行了时域数值模拟。结果表明：文中方法可以用于时域研究不规则波中的二阶问题,在人工边界处达到无反射的效果。     

直立圆柱体内孤立波载荷特性数值模拟

以三类内孤立波理论(KdV、eKdV和MCC)的适用性条件为依据,将内孤立波诱导上下层深度平均水平速度作为入口条件,采用Navier-Stokes方程为流场控制方程,建立了两层流体中内孤立波对直立圆柱体强非线性作用的数值模拟方法.结果表明,数值模拟所得内孤立波波形及其振幅与相应理论和实验结果一致,并且直立圆柱体内孤立波水平力、垂向力及其力矩数值模拟结果与实验结果吻合.直立圆柱体内孤立波载荷由波浪压差力、粘性压差力和摩擦力构成,其中摩擦力很小,可以忽略;对于水平力,其波浪压差力与粘性压差力量级相当,流体粘性的影响显著;对于垂向力,粘性压差力很小,流体粘性影响可以忽略.此外,直立圆柱体对内孤立波的波形及其诱导流场的影响很小,因此采用Morison公式和傅汝德—克雷洛夫力分别计算其内孤立波水平力和垂向力是可行的.     

异形钢桥塔高程精密测量技术

针对传统桥塔高程测量方法受场地、环境等因素影响较大无法满足异形桥塔高程测量要求的问题,本文结合永定河特大桥桥塔高程测量的实际需求,提出了一种基于正负压力变送器测量桥塔倾斜端口高差的方法,并介绍其计算分析方法.全站仪地面竖向高程传递+端口正负压力变送器测量倾斜端口高程的测量方法克服了传统方法中要求测试端口基本平直的限制;温度引起的液态水密度变化会对压力变送器测量高差的精度产生较大影响;通过测量已知基准点高差反算液体密度取值可减小温度影响产生的误差;该测量方法能够满足高度大于100 m的异形桥塔高程精确、快速测量的要求.     

Mixed manual/semi-automated traffic: a macroscopic analysis

The use of advanced technologies and intelligence in vehicles and infrastructure could make the current highway transportation system much more efficient. Semi-automated vehicles with the capability of automatically following a vehicle in front as long as it is in the same lane and in the vicinity of the forward looking ranging sensor are expected to be deployed in the near future. Their penetration into the current manual traffic will give rise to mixed manual/semi-automated traffic. In this paper, we analyze the fundamental flow–density curve for mixed traffic using flow–density curves for 100% manual and 100% semi-automated traffic. Assuming that semi-automated vehicles use a time headway smaller than today’s manual traffic average due to the use of sensors and actuators, we have shown using the flow–density diagram that the traffic flow rate will increase in mixed traffic. We have also shown that the flow–density curve for mixed traffic is restricted between the flow–density curves for 100% manual and 100% semi-automated traffic. We have presented in a graphical way that the presence of semi-automated vehicles in mixed traffic propagates a shock wave faster than in manual traffic. We have demonstrated that the presence of semi-automated vehicles does not change the total travel time of vehicles in mixed traffic. Though we observed that with 50% semi-automated vehicles a vehicle travels 10.6% more distance than a vehicle in manual traffic for the same time horizon and starting at approximately the same position, this increase is marginal and is within the modeling error. Lastly, we have shown that when shock waves on the highway produce stop-and-go traffic, the average delay experienced by vehicles at standstill is lower in mixed traffic than in manual traffic, while the average number of vehicles at standstill remains unchanged.