降低重型车用柴油机废气排放的技术措施

在维持重型车用柴油机良好的燃油经济性的同时，降低其氮氧化物（NOx）和微粒（PM）排放的关键，是燃烧过程的进一步优化。阐述了喷油系统的改进、燃烧室设计的优化、4气门低涡流和可变涡流结构的采用等技术措施的潜力，以及一些诸如排气再循环、喷水和掺烧清洁燃料等附加措施的效果     

国际平整度指数二元曲面函数描述模型的研究

通过建立国际平整度指数(IR I)的数字地面模型来描述基于道路面状的IRI指标概念。在分析研究几类数字地面模型的曲面函数内插方法的基础上,给出了IRI的二元双一次曲面乘积型逼近模型。最后给出了定义和描述同一段道路路面不同时段IRI变化量的乘积型重积分求积公式、IRI均值和标准差、IRI值的变化差均值及IRI值变化差的标准差、IRI值单位时间变化速率等数值解法。     

用于车道识别的分段切换车道模型

为了使得车道模型既能准确地描述车道形状,又不影响车道识别算法的实时性,提出了一种分段切换车道模型。对近视场区域使用直线模型匹配车道线,对远视场区域则在直线模型和二次曲线模型之间进行切换,以适应有曲率和无曲率道路的识别要求。试验表明,使用分段切换车道模型的车道识别算法能够很好地匹配各种形状道路,并能满足实时性要求。     

动态分段技术在路面管理系统中的应用

动态分段技术是一项新的线性特征的存储、显示和分析技术,已经开始应用于路面管理系统。该文介绍了动态分段技术中的基本概念及其基本原理,分析了路面管理系统中动态分段的数据结构并结合实例介绍了其在该系统中的应用。     

数字电子调速器的设计与应用

数字电子调速器是实现直列柱塞泵柴油机电子控制的有效方案.介绍了利用线性比例电磁铁作为执行器,以Mortorola的MC9S12DP256 MCU为主控芯片,在CodeWarrier集成开发环境下开发了相应的控制程序,实现了柴油机的数字调速,并应用于LR6105Q柴油机.测试结果表明,发动机稳态调速率小于2.5%,符合各类常规设备动力的调速要求;发动机的两级调速转矩特性符合车辆的动力特性要求.     

基于Synchro的多交叉口交通信号控制研究

分析了城市道路交叉口的平均延误时间、道路通行能力和信号配时的数学模型和计算方法。在对宝鸡市的22个主要信控交叉口进行了大量的交通调研的基础上，选取了有代表性的太白路、公园路上多个交叉口作为协调控制交叉口，阐述了交叉口信号协调控制系统的设计方法。最后通过公式计算和Synchro系统仿真的两种方法，对线控前后的系统进行了对比，结果表明宝鸡市受控干道交叉口的延误和通行能力得到了明显的改善。     

Optimization models for differentiating quality of service levels in probabilistic network capacity design problems

This paper develops various chance-constrained models for optimizing the probabilistic network design problem (PNDP), where we differentiate the quality of service (QoS) and measure the related network performance under uncertain demand. The upper level problem of PNDP designs continuous/discrete link capacities shared by multi-commodity flows, and the lower level problem differentiates the corresponding QoS for demand satisfaction, to prioritize customers and/or commodities. We consider PNDP variants that have either fixed flows (formulated at the upper level) or recourse flows (at the lower level) according to different applications. We transform each probabilistic model into a mixed-integer program, and derive polynomial-time algorithms for special cases with single-row chance constraints. The paper formulates benchmark stochastic programming models by either enforcing to meet all demand or penalizing unmet demand via a linear penalty function. We compare different models and approaches by testing randomly generated network instances and an instance built on the Sioux–Falls network. Numerical results demonstrate the computational efficacy of the solution approaches and derive managerial insights.     

A multiobjective model for maximizing fleet availability under the presence of flight and maintenance requirements

Every aircraft, military or civilian, must be grounded for maintenance after it has completed a certain number of flight hours since its last maintenance check. In this paper, we address the problem of deciding which available aircraft should fly and for how long, and which grounded aircraft should perform maintenance operations, in a group of aircraft that comprise a combat unit. The objective is to achieve maximum availability of the unit over the planning horizon. We develop a multiobjective optimization model for this problem, and we illustrate its application and solution on a real life instance drawn from the Hellenic Air Force. We also propose two heuristic approaches for solving large scale instances of the problem. We conclude with a discussion that gives insight into the behavior of the model and of the heuristics, based on the analysis of the results obtained.     

基于感知能力的微观交通流动力学建模与仿真

基于驾驶员驾驶行为感知能力，提出了一种新的微观交通流动力学模型. 通过理论分析和数值模拟，对新模型的性能进行了详细的研究分析. 通过理论分析，基于线性稳定性理论，得到了新模型的稳定性条件. 通过数值模拟，深入分析了各参数对密度波和迟滞环的影响，进而对交通流稳定性的影响. 仿真算例结果表明：驾驶员感知能力对交通流稳定性有显著影响，车头距离变化信息可有效增强交通流的稳定性，对stop-and-go 交通拥堵有显著抑制作用，但不可避免的感知缓冲时间会破坏交通稳定性，进而产生严重的stop-and-go 交通拥堵；密度波和迟滞环的数值仿真结果与理论分析结果吻合得很好，验证了理论分析结果.     

Decoupled 3D moment control using in-wheel motors

Vehicles equipped with in-wheel motors are being studied and developed as a type of electric vehicle. Since these motors are attached to the suspension, a large vertical suspension reaction force is generated during driving. Based on this mechanism, this paper describes the development of a method for independently controlling roll and pitch as well as yaw using driving force distribution control at each wheel. It also details the theoretical calculation of a method for decoupling the dynamic motions. Finally, it describes the application of these 3D dynamic motion control methods to a test vehicle and the confirmation of the performance improvement.