A multiobjective model for maximizing fleet availability under the presence of flight and maintenance requirements

Every aircraft, military or civilian, must be grounded for maintenance after it has completed a certain number of flight hours since its last maintenance check. In this paper, we address the problem of deciding which available aircraft should fly and for how long, and which grounded aircraft should perform maintenance operations, in a group of aircraft that comprise a combat unit. The objective is to achieve maximum availability of the unit over the planning horizon. We develop a multiobjective optimization model for this problem, and we illustrate its application and solution on a real life instance drawn from the Hellenic Air Force. We also propose two heuristic approaches for solving large scale instances of the problem. We conclude with a discussion that gives insight into the behavior of the model and of the heuristics, based on the analysis of the results obtained.     

基于感知能力的微观交通流动力学建模与仿真

基于驾驶员驾驶行为感知能力，提出了一种新的微观交通流动力学模型. 通过理论分析和数值模拟，对新模型的性能进行了详细的研究分析. 通过理论分析，基于线性稳定性理论，得到了新模型的稳定性条件. 通过数值模拟，深入分析了各参数对密度波和迟滞环的影响，进而对交通流稳定性的影响. 仿真算例结果表明：驾驶员感知能力对交通流稳定性有显著影响，车头距离变化信息可有效增强交通流的稳定性，对stop-and-go 交通拥堵有显著抑制作用，但不可避免的感知缓冲时间会破坏交通稳定性，进而产生严重的stop-and-go 交通拥堵；密度波和迟滞环的数值仿真结果与理论分析结果吻合得很好，验证了理论分析结果.     

移动模架造桥机在苏通大桥引桥PC连续梁的应用

介绍了苏通北引桥完全自行式移动模架系统的一般构造及工作原理。重点分析了移动模架系统施工过程中箱梁底板线形控制要点及箱梁悬臂段受力特点，针对悬臂端箱梁底板横向应力水平过高的特点，揭示了原因，提出了工程措施并在实桥中应用。     

二层线性规划的模糊数学解法(Ⅱ)

针对上层有约束条件、下层有Ｎ个独立的决策单元的二层线性规划问题，提出了一种模糊数学解法。首先，把这种规划分解为若干单层规划；然后引入隶属函数，用３个定理对各单层规划的解进行讨论，最终把这种二层线性规划转化为求解一个单层线必规划问题。使问题得到了简化。     

直线电机在城市轨道交通中的优势及应用

直线电机轮轨交通系统因其工程造价低、线路适应性强等优势，被认为是资源节约型城市轨道交通先进模式。分析了日本、加拿大等直线电机地铁车辆的转向架、牵引和制动等技术的特点和性能，探讨了直线电机在城市轨道交通应用中的经济性和适用性。     

组合预测在港口吞吐量预测中的应用研究

以某港口1996—2002年吞吐量为原始数据,按照“误差平方和最小”的准则,把一元线性回归模型和GM(1,1)模型组合起来,对某港口2004—2008年的吞吐量进行了组合预测。     

分段施工PC梁桥线形的分形预测方法

充分考虑到分段施工PC梁桥施工阶段线形变化的非线形,复杂性和随机性,提出一种基于分形理论的节段线形预测方法。采用滚动选取预测样本降低原始误差累计的方法,建立了节段施工线形预测理论模型。将此模型应用于黄河大桥悬臂施工线形预测控制中,按节段施工周期依次预测下一节段的线形指标,结果证实了分段施工PC梁桥线形变化的分形特征,与实测和理论值相比,预测值具有较高的工程精度。     

直线电机车辆牵引电机恒隙控制的初步研究

直线电机轨道车辆采用直线感应电机牵引、轮轨系统支撑导向,是一种新型城市轨道交通工具。本文介绍了直线电机的原理,对加拿大、日本以及广州4号线的直线电机车辆的不同牵引电机悬挂方式进行了对比分析,提出了在牵引电机悬挂系统中采用主动控制的恒隙技术的初步设想。     

直线电机地铁车辆转向架

介绍了直线电机地铁车辆转向架的功能和组成、径向转向架的采用、直线感应电机悬挂技术、直线感应电机气隙调节装置,最后提出了目前直线电机地铁车辆转向架设计建议。     

Nonlinear feedforward–feedback control of clutch-to-clutch shift technique

To improve the shift quality of the vehicle with clutch-to-clutch gear shifts, a nonlinear feedforward–feedback control scheme is proposed for clutch slip control during the shift inertia phase. The feedforward control is designed based on flatness in consideration of the system nonlinearities, and the linear feedback control is given to accommodate the model errors and the disturbances. Lookup tables, which are widely used to represent complex nonlinear characteristics of powertrain systems, appear in their original form in the designed feedforward controller, while the linear feedback controller is calculated through linear matrix inequalities such that the control system is robust against the parameter uncertainties. Finally, the designed controller is tested on an AMESim powertrain simulation model, which contains a time-variant model of clutch actuators.