LED灯具在高速列车照明系统中的应用

随着我国高速铁路事业的发展,旅客对车内照明环境品质的要求越来越高,在我国高速列车照明设计中广泛采用LED灯具作为光源。通过对高速动车组车载灯具与25T型列车传统车载灯具的测试对比,总结出LED灯具在发光效率等方面相对于传统灯具的优势,为高速动车组室内照明设计提供依据。     

Integrated vehicle and powertrain optimization for passenger vehicles with vehicle-infrastructure communication

This research proposes an optimal controller to improve fuel efficiency for a vehicle equipped with automatic transmission traveling on rolling terrain without the presence of a close preceding vehicle. Vehicle acceleration and transmission gear position are optimized simultaneously to achieve a better fuel efficiency. This research leverages the emerging Connected Vehicle technology and utilizes present and future information—such as real-time dynamic speed limit, vehicle speed, location and road topography—as optimization input. The optimal control is obtained using the Relaxed Pontryagin’s Minimum Principle. The benefit of the proposed optimal controller is significant compared to the regular cruise control and other eco-drive systems. It varies with the hill length, grade, and the number of available gear positions. It ranges from an increased fuel saving of 18–28% for vehicles with four-speed transmission and 25–45% for vehicles with six-speed transmission. The computational time for the optimization is 1.0–2.1 s for the four-speed vehicle and 1.8–3.9 s for the six-speed vehicle, given a 50 s optimization time horizon and 0.1 s time step. The proposed controller can potentially be used in real-time.     

Point-to-point speed enforcement systems: Speed limits design criteria and analysis of drivers’ compliance

Point-to-point (P2P) speed enforcement is a relatively new approach to traffic law enforcement. Its technology allows vehicles whose average speed exceeds the speed limit over the controlled section to be fined. It therefore encourages compliance over distances longer than those where spot enforcement policies have been in place.In this paper, a procedure for consistently setting speed limits with such enforcement systems is proposed. Such a method has been applied to design the speed limits on two motorways in the district of Naples, Italy, where P2P enforcement systems became operational in 2009 and 2010. The speed limits, which were set using the Italian geometric design standard to assess vehicle stability and stopping sight distance, have been compared with those provided by using well-known international standards.The impact of the newly designed speed limits and of the P2P enforcement system on drivers’ speeding behaviour has been quantified for each highway section and vehicle type. In fact, accurate measurements of the average travel speeds of each vehicle crossing the enforced sections, before and after the activation of the system, were available. The migration from the old speed limits with spot speed enforcement to the new approach resulted in a notable increase in drivers’ compliance to the speed limits with a remarkable decrease in both the average of individual speeds and in their standard deviation.In addition, the analysis of 3 years of data shows that a gradual adaptation of drivers’ behaviour to the system took place. In particular, a decreasing compliance to the speed limits points to a non-optimal system management. Finally, the results of a revealed preference survey allowed us to make a behavioural interpretation regarding the significantly different impacts measured on the two motorways.     

对地铁信号系统列车运行速度制约因素的探讨

信号系统是保障地铁运行安全及提高运行效率的重要设备,列车超速防护功能是信号系统一个非常关键的功能。信号系统防护下的列车运行速度由车辆、线路、轨道、限界及信号系统等条件共同决定。由于相关专业对信号系统安全制动模型不了解,在实际工程中易造成"速度浪费"现象。从信号系统安全制动模型的原理出发,对车辆、线路、轨道、限界等专业对列车运行速度的制约因素进行分析,提出建议。     

多元评价体系组合模型在铁路隧道变形预测中的应用

为克服传统预测模型结构单一、预测精度及稳定性不足等缺陷,提出多元体系组合预测模型的建模思路。首先,基于支持向量机、BP神经网络及ARMA模型3种单一预测模型,构建铁路隧道变形预测体系;再以均方根误差、误差平方和及平均绝对误差等为评价准则或指标,构建各预测结果的误差评价体系,求解各单项预测模型的权值贡献指数,得到最优组合权值;然后利用后验差检验、残差检验和关联度检验构建预测精度校验体系,对组合预测结果进行检验,评价预测模型的有效性;最后,结合工程实例,对多元体系组合预测模型在特大断面隧道中的变形预测效果进行检验。结果表明:多元评价体系组合模型预测相对误差值均小于2%,具有较高的预测精度,且较单一预测模型具有更高的预测精度,也一致通过相关检验,验证了多元体系组合预测模型的有效性。     

双车道公路危险路段评价指标与安全改善对策

选取相邻路段车速差△V、车速降低系数SRC和速度离差作为鉴别双车道公路危险路段的三个评价指标,从道路工程措施和交通安全设施两方面对事故多发路段进行安全改善对策研究。以内蒙古S203公路为例,利用评价指标进行危险路段判析,针对K465＋900急弯陡坡危险路段,通过线形改造以及设置交通标志标线、减速设施、避险车道和防护设施等一系列工程改造措施,进行安全改善综合方案设计。     

互通立交平面线形设计的经验探讨

通过设计工作的实践,探讨互通立交平面线形设计的具体步骤、操作方法和注意事项,并对匝道线元参数的取值、线元参数与运行速度的关系、线形设计的连续性与协调性等方面提出了一些见解。     

湖北城际铁路动车组选型与交路优化研究

以湖北城际铁路为例,通过比照区间运行速度、参考我国高级动车的技术配置合理选择车型,并优化原交路,最终对原、现两种方案的成本效益对比分析,实证表明,该方案有助于减少动车购置成本,降低亏损,并简化原有运输组织工作.     

基于物联网技术的高速铁路综合维修物流监控系统

提出了基于物联网技术的高速铁路综合维修物流作业管理流程及监控系统组成,并对该系统实现的关键技术问题即多阅读器碰撞问题进行了Matlab仿真实验和现场试验,研究结果表明利用概率功率控制算法的阅读器,在阅读器5台以下的情况,高铁综合维修物流监控系统多阅读器可利用嵌入式软件监控范围超过3.5 m,可达到比较理想的状态,保证了该系统实现的可行性.     

高速铁路声屏障在列车脉动风载荷下的强度计算

为了得到高速列车声屏障在列车经过时的受力规律,建立了声屏障的外流场模型和有限元模型。利用流固耦合技术,计算分析了声屏障的三维动态流场和结构模型,得到了列车风气动力特性和H钢立柱的受力规律。计算结果表明:列车经过时声屏障受到的压力为一个随时间变化且不均匀分布的面载荷。H钢立柱发生弯扭组合变形,弯矩扭矩各经历两次换向。每当列车经过一次,等效应力产生四个脉冲。H钢立柱受到的应力不大,可能出现疲劳破坏。