Pb and Pu in the Northeast Water Polynya, Greenland: particle dynamics and sediment mixing rates

Distributions of the radionuclides ²¹⁰Pb and ^239,240Pu in sediment cores from the Northeast Water Polynya, Greenland, showed that these nuclides reached depths of 5–15 cm by particle mixing and sediment accumulation. End-member average values of the particle mixing coefficient and sediment accumulation rate were 0.13 cm² y⁻¹ and 0.06 cm y⁻¹, obtained from the ²¹⁰Pb profiles by assuming that each process is dominant relative to the other. Both ²¹⁰Pb and ^239,240Pu were measured on four cores; using the Pu data to constrain mixing rates produced corrected sediment accumulation rates that were 20–80% of the values calculated by neglecting mixing. Organic carbon burial in the polynya sediments was ≤0.4 mmol m⁻² d⁻¹, based on measured POC values at depth in the sediments and sediment accumulation rates corrected for mixing. This value is about 1% of the independently measured POC flux leaving the euphotic zone and compares with benthic carbon remineralization rates of 7% calculated by others from O₂ uptake in the sediments.The inventories of excess ²¹⁰Pb in the sediments ranged from 6 to 28 dpm cm⁻². Relative to the atmospheric input of ²¹⁰Pb and in situ production from decay of ²²⁶Ra, approximately 5 dpm cm⁻² of ²¹⁰Pb was being removed from the water column. The difference between the removal from the water column and sediment inventories suggests a net import of ²¹⁰Pb to the polynya. This may occur by input of dissolved ²¹⁰Pb from offshore waters or by input of ²¹⁰Pb carried by sea ice. Particulate matter in land-derived fast ice adjacent to the polynya contained 330 ± 14 dpm of excess ²¹⁰Pb g⁻¹. If particles transported in sea ice are comparable to those extracted from fast ice, then sea ice transport into the polynya followed by melting may be an important source of excess ²¹⁰Pb to the area. Fast ice also may contribute ²¹⁰Pb if portions break off and melt within the polynya, as occurred in 1993.     

渤海海上风力发电示范工程的电气设计

介绍了渤海海上风力发电示范项目的基本情况。从风电机组、入网方案、电网稳定、设备选型与布置、海洋环境影响诸方面介绍了渤海海上风力发电示范项目电气设计工作，希望对我国海上风电场的建设能起到一点借鉴作用。     

全站仪测微倾角法在大跨度桥梁墩台沉降观测中的应用

墩台沉降及位移观测是新建特大桥投入运营初期的重点观测项目 ,结合芜湖长江大桥正桥桥跨长、观测条件限制多的特点 ,在测量中采用全站仪测微倾角法 ,使问题得到很好地解决 ,为大桥的安全运输提供了翔实的数据保障     

舰船回转过程中内、外侧螺旋桨负荷变化规律的新现象

在许多教科书中,螺旋桨推进双桨船在回转过程中内、外螺旋桨负荷变化规律均有如下叙述:回转过程中内侧螺旋桨负荷远大于外侧螺旋桨负荷.这个结论也被某些实船试验结果所证实.但新近完成的某双桨船的回转试验的多个实测结果表明:外侧螺旋桨负荷远大于内侧螺旋桨负荷.在上世纪90年代国内有人已发现过这一新现象,但当时无人记录和分析以进行研究.本文报告和分析了这一新现象.文章首先简要回顾了以往教科书和某些实船试航回转过程中内、外桨负荷变化规律;然后介绍了某新船回转试验的实测结果,论述了实测结果的可信性.本文着重探讨了导致这一新现象的主要原因,如船体形状、船的运动、内外螺旋桨的运动、桨与船的相互作用和桨与桨的相互作用等.     

New-Level VR Marine Training System

Marine simulator is a valuable and effective medium for maritime education and training and is becoming widespread to foster the qualified and competent personnel for working in the maritime industry.However,many problems with most marine simulation systems today limit their pervasive use:the limited accessibility,immobility,the high expenditure,the long develop- meat cycle,and the difficult maintenance etc.A web-based maritime training environment is proposed in this paper as a new ma- rine training level,which fully combining web technology,VR,high fidelity simulation,and e-learning tools to create a more cost- effective and flexible training environment still with very realistic and high-interactive simulation characteristics,the system will provide a consistent and more flexible training medium for improving maritime education and training.     

CAD／CAM技术在船舶减摇鳍设计制造中应用的思考

介绍了CAD／CAM技术以及如何应用CAD／CAM技术为减摇鳍的设计开发提供更有效的设计平台。     

基于设计模式的科研项目管理系统设计研究

介绍基于设计模式的高校科研项目管理系统的设计。针对科研项目管理系统的开发,提出一个基于模式的设计方案,解决系统开发过程中功能扩展以及代码重用等问题。     

船体图样样板图的程序设计

介绍基于AutoCAD VBA船体图样样板图的程序设计方法,包括图样幅面、比例、文字样式、尺寸样式、图层、线型和标题栏等的设计,以及程序菜单的设计和程序代码的自动加载,列举了用VBA编写的相关程序。     

浅析环保城市轨道交通

本文通过对国内轨道交通发展前景、环境现状、主要污染类型、特点、产生机理和影响因素等方面的分析,提出从规划设计、施工和运营三个方面进行综合环境污染治理的措施,以实现环保的城市轨道交通。     

海工耐久混凝土氯离子渗透性能的影响因素及其扩散系数的早期推定

大规模海工耐久混凝土在国内应用很少,各种影响因素对其影响作用不甚明了,通过正交设计的方法研究各影响因素对耐久性的影响,对指导配合比设计和施工过程质量控制具有积极的意义。