粘连蚕卵图像分离算法研究

针对蚕卵图像中存在的粘连或者部分重叠现象,本文提出了一种新的分离方法。该方法先采用模糊C均值聚类算法将蚕卵图像从背景中分割,然后采用模糊距离变换得到模糊距离图像,最后使用分水岭算法将粘连或者部分重叠蚕卵分离。实验证明,此法能够将粘连颗粒物图像有效分离。     

Application of frequency estimation algorithm based on a single vector sensor in underwater acoustic communication

1 Introduction1 An acoustic vector sensor (AVS) simultaneously measures the acoustic pressure and the components of acoustic particle velocity which render the basis for developing new signal processing methods[1-2]. The higher processing gain can be obta…     

Min-norm spatial spectrum based on acoustic vector-sensor linear array

1 Introduction1 The Min-Norm(MN) algorithm was proposed by Kumaresan and Tufts[1] for estimating the DOA of targets applied at pressure sensor arrays. It has been proved that lower bias and higher resolution of DOA estimation using the MN algorithm is obt…     

Study of automatic designing of line heating technique parameters

1Introduction Lineheatingisashellplateheatprocessingmethod usedinshipbuildingproduction.Itisacomplexand difficulttechnique,mainlyusedindoublebending shellplateforming.Becausetherearemanyinfluence factorsinplateforming,theinfluencedisciplineis hardtopredic…     

CABOSFV算法中集合稀疏差异度阈值确定方法

在实际应用中,CABOSFV算法初始参数———集合稀疏差异度阈值b的确定是否合理,对聚类结果是否有效起决定作用。本文针对如何科学方便地确定集合稀疏差异度阈值b进行了深入研究,给出了集合稀疏差异度阈值确定方法,并通过该方法进行了实例计算。计算结果表明,由于该方法能够确定聚类结果中类的对象组成最小数量,聚类结果的粗糙与精细程度可以人为控制,对聚类结果的准确及高效提供了很好的保证,能够为CABOSFV算法进行聚类提供合理的阈值。     

虚拟仪器在大型养路机械电子插件测试系统中的应用

从大型养路机械自动测试系统的功能和系统结构出发,详细说明了虚拟万用表、虚拟示波器的基本工作原理和实现方法,并重点阐述了利用恒流源测量电阻。虚拟仪器的应用降低了测试成本和测试的难度。     

金茂大厦空调水系统能量计量管理系统——关于其设计、施工、调试和使用实例

叙述金茂大厦空调水系统能量计量管理系统的计量方法和必须解决的几个问题,详细分析了空调水系统能量计量设计方案并加以确定,提高了测温精确度,同时介绍了有关仪表的造型问题．     

Electric vehicle charging station locations: Elastic demand,station congestion,and network equilibrium

Battery-only electric vehicles (BEVs) generally offer better air quality through lowered emissions, along with energy savings and security. The issue of long-duration battery charging makes charging-station placement and design key for BEV adoption rates. This work uses genetic algorithms to identify profit-maximizing station placement and design details, with applications that reflect the costs of installing, operating, and maintaining service equipment, including land acquisition. Fast electric vehicle charging stations (EVCSs) are placed across a congested city's network subject to stochastic demand for charging under a user-equilibrium traffic assignment. BEV users’ station choices consider endogenously determined travel times and on-site charging queues. The model allows for congested-travel and congested-station feedback into travelers’ route choices under elastic demand and BEV owners’ station choices, as well as charging price elasticity for BEV charging users.Boston-network results suggest that EVCSs should locate mostly along major highways, which may be a common finding for other metro settings. If 10% of current EV owners seek to charge en route, a user fee of $6 for a 30-min charging session is not enough for station profitability under a 5-year time horizon in this region. However, $10 per BEV charging delivers a 5-year profit of $0.82 million, and 11 cords across 3 stations are enough to accommodate a near-term charging demand in this Boston-area application. Shorter charging sessions, higher fees, and/or allowing for more cords per site also increase profits generally, everything else constant. Power-grid and station upgrades should keep pace with demand, to maximize profits over time, and avoid on-site congestion.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

战场抢修多目标多分队调度优化研究

基于多目标的战场抢修分队调度优化问题一直以来是装备指挥管理部门关注的问题之一.通过约束转换,确立了采用遗传算法进行多目标优化调度的模型,并详细地说明了遗传操作方法的设计,实例验证了遗传算法在多目标多分队调度问题处理过程中的有效性.