An inverse finite element method for the analysis of VIV data

This paper presents an algorithm for the frequency domain solution of dynamic linear “inverse” problems, that is for the processing of measurement data (strain, acceleration etc.) acquired on a mechanical structure, in order to estimate the loads acting on the structure and its corresponding response. The problem is formulated as a constrained (force equilibrium) optimization (small deviations from measurements, small loads) problem, which is transformed into an unconstrained problem, then into differential equations. The algorithm is applied to the estimation of hydrodynamic forces induced by the shedding of vortices from an offshore oil riser.     

地铁盾构隧道沿线障碍桩冲桩破除施工技术

通过西安地铁二号线盾构区间隧道穿越障碍桩的工程案例,对4种废弃障碍桩的处理工艺的优缺点进行对比,确定采用"基坑开挖+冲桩"的方法,并介绍冲桩施工的要点以及关键技术措施。采用的施工方案施工效果明显：工序简单、容易操作、工期短;工序相对安全,工艺可靠。所得以验可供今后类似工程借鉴参考。     

浅析G30线K3981～K3982路段防沙害处治方法

结合博乐公路管理局管养的G30线K3981～K3982路段路基边坡防沙害处治养护项目的实施,对处治沙害实施流程进行了详细的阐述,有一定的参考价值。     

液压转向系统冷启动沉故障机理及测试方法研究

液压转向系统冷启动沉故障在北方冬季是比较常见的一个故障,论文针对故障产生的机理进行了深入分析,并对产生故障的常见原因及改进方法进行了简单介绍,最后对如何确定故障源从测试方面提供了方法.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

网络计划工期－费用的动态规划决策

关键路线法中网络计划工期－费用优化，可以化为一系列单阶段决策，构成确定性离散优化决策问题，本文试用动态规划处理这一过程。     

有限体积法在一维平底溃坝问题研究中的应用

以一维平底溃坝问题为例,讨论了有限体积法的应用。从溃坝基本方程入手,采用Roe方法计算界面数值通量,采用空间一阶、时间二阶格式（预测校正二步格式）计算溃坝问题,得到了满意的结果。     

贝叶斯假设方法在水声成像声呐阵控制中的应用

在对水中目标轮廓进行水声成像时,可设计声呐阵中各声呐单体对目标分割识别,利用贝叶斯假设方法,解决多声呐单体识别结果的目标最终识别问题,实现声呐阵的有效控制。     

基于并联型灰色神经网络模型的港口吞吐量预测方法探讨

港口吞吐量预测是港口规划的基础,在确定港口发展方向、投资规模等方面发挥着十分重要的作用,因此有必要对港口吞吐量的发展趋势做出合理的预测。结合灰色理论和神经网络模型的特点,尝试用灰色神经网络组合模型之一——并联型灰色神经网络模型进行港口吞吐量预测。用实际算例证明了该方法在港口吞吐量预测中的有效性。     

应用巴列特统计方法降低工程成本的实践

文章简述了巴列特（Pareto）统计分配法的基本要点，并结合天津港南疆工作船码头工程的施工实例，应用巴列特法进行了分析，明确了该工程中节省成本的重点项目、内容及节省成本的贡献率，从而有针对性地制定了相应的成本控制和节约措施，经过实践，收到了较好的效果。