加强我军空中战略投送能力建设研究

针对我军空中战略投送能力薄弱的问题,结合我国国情、军情,研究提出了建立健全快速动员机制、增强民用运输机的军事适用性、发展军用运输机和创新战略投送模式等建议,可为我军空中战略投送能力建设提供参考。     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.     

烟台某工程循环水取、排水工程压水试验

为确定烟台某工程地基基岩的渗透特性,阐述水上岩体压水试验的主要操作过程、试验数据处理和试验结果分析评价方法．测定区域内的各岩层的透水率和渗透系数,给出不同风化程度岩层的渗透性评价,为设计提供防渗设计所需参数。     

A new logit‐artificial neural network ensemble for mode choice modeling: a case study for border transport

Logit model is one of the statistical techniques commonly used for mode choice modeling, while artificial neural network (ANN) is a very popular type of artificial intelligence technique used for mode choice modeling. Ensemble learning has evolved to be very effective approach to enhance the performance for many applications through integration of different models. In spite of this advantage, the use of ANN‐based ensembles in mode choice modeling is under explored. The focus of this study is to investigate the use of aforementioned techniques for different number of transportation modes and predictor variables. This study proposes a logit‐ANN ensemble for mode choice modeling and investigates its efficiency in different situations. Travel between Khobar‐Dammam metropolitan area of Saudi Arabia and Kingdom of Bahrain is selected for mode choice modeling. The travel on this route can be performed mainly by air travel or private vehicle through King Fahd causeway. The results show that the proposed ensemble gives consistently better accuracies than single models for multinomial choice problems irrespective of number of input variables. Copyright © 2015 John Wiley & Sons, Ltd.     

盾构法施工单机核算管理模式的应用

近年来盾构机越来越多地应用于各种隧道工程中,其中地铁应用的数量最多,约占80%。现代盾构已演变成为一种高度智能化的大型工程机械装备,对其控制的好坏将直接影响到整个工程的施工成本和企业的经营效益,而通过单机核算降低机械成本是降低施工成本、提高企业效益的有效手段,因此推行盾构法施工单机核算显得尤为重要。文章结合地铁2222标施工项目,重点介绍了盾构法单机核算管理模式及其在施工中的应用。     

深圳轨道交通投融资模式回顾及再创新探索

深圳轨道交通已进入高质量发展时期,政府的财政压力加大,需要再次创新投融资模式.深圳轨道交通前四期经历了一元、多元化的投融资创新,五期将实施轨道与土地一体化发展的思路,而上盖物业开发是轨道交通投融资再创新的基石.基于深圳利用先行先试、引领示范政策的大好机遇,提出两种创新的投融资模式:"轨道交通PPP项目+上盖物业规划+浮...     

普速铁路钢轨滚动接触疲劳裂纹萌生研究和检验

以普速铁路京九线不同曲线半径为研究对象,建立车辆-轨道动力学模型、磨耗和裂纹萌生预测模型;计算60N廓形在不同曲线半径条件下的轮轨接触状态,预测了不同曲线条件下磨耗发展率、裂纹萌生位置与寿命,并与京九线现场观测结果进行对比验证。研究结果表明:随着疲劳损伤的累积,不同曲线半径下钢轨的阶段磨耗发展率呈下降的趋势,其中曲线半径小(600 m)的磨耗发展率降低最快,随着曲线半径的增大,平均磨耗发展率降低趋势减缓;不同曲线半径下钢轨裂纹萌生位置均在钢轨表面以下1～3 mm处,横向位置在距离轨顶中心15～20 mm范围内,曲线半径600 m外轨裂纹萌生寿命大约为2.64×10⁵次,内轨裂纹萌生寿命约为4.86×10⁵次,与现场观测较为符合。     

机器人生产线在船舶智能制造中的应用研究

智能制造是“中国制造2025”的主攻方向。本文先浅谈了智能船厂，并结合国内首个智能船厂试点对智能船厂的初级发展建设等进行初步探索，主要对船舶智能制造机器人生产线应用进行梳理分析，如工艺流程及布置、生产模式改进、提质增效和人员减配等。     

桥梁大体积混凝土施工技术探讨

从原材料选择、合理安排施工进度、养护及施工缝处理等角度分析桥梁大体积混凝土施工技术要点.对同类工程有一定的借鉴意义.     

乾元公司铁路专用线场站模式探讨

目前,传统的铁路专用线建设模式是铁路专用线自接轨站接轨,通过区间正线引入厂区的建设模式,这种模式的区间正线受地形条件、厂区位置和沿线规划影响较大,这些影响将不可避免地导致铁路专用线建设工程投资的增加,如能根据运输性质考虑缩短区间正线长度,在接轨站旁边设装车作业站,将大大减少专用线工程投资.以乾元公司铁路专用线建设模式为例来研究铁路专用线场站模式,就如何在接轨站旁边设装车作业站,实现接轨站设备与铁路专用线共用进行探讨.