大深度浮力驱动式水下运载器的浮潜运动研究

基于模型试验,对大深度浮力驱动式水下运载器的上浮运动进行研究与分析,基于数值仿真,提出大深度浮力驱动式水下运载器浮潜运动的快速预报方法,并将预报结果与模型试验结果进行对比,证明快速预报方法的准确性。使用快速预报方法,针对水下运载器比重变化、流体密度变化、水下运载器初速度以及水流扰动4种因素对浮潜运动的影响进行研究.此外,对水下运载器作六自由度运动时所受的水动力进行计算,为后续的六自由度运动预报和研究提供基础。     

单侧边载作用下黏土中单桩负摩阻力特性模型试验研究

桩基础边载作用会在桩周产生负摩阻力,进而危及软土地区高桩码头、人工岛、路基等工程的安全。通过开展黏土中单侧堆载作用下单桩室内模型试验,测定桩身应变、桩顶沉降和水平位移,研究边载作用距离和桩型对桩身轴力及弯矩的影响,探讨桩身负摩阻力、桩顶沉降和水平位移在黏土固结过程中的时间效应。结果表明:边载作用距离对桩身最大轴力和最大弯矩有较大影响;翼板桩会增加桩身最大轴力和最大弯矩;负摩阻力和有效应力系数随时间增长且增速趋缓;增加边载作用距离和添加翼板都会提升桩身中性点位置,在这两组试验中均提升了8.33%。     

不同间隙比竖井内水流与平衡重二维流固耦合

目前,水力式升船机在国内外尚无投入实际运行,无实际设计、安装、运行经验可循。建立不同间隙比竖井与平衡重之间二维流固耦合数学模型,在非恒定流作用下,对不同间隙比时平衡重上升过程的水动力响应进行动态模拟。得出有利于该类升船机稳定运行的最优间隙比。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Emission rates of intermodal rail/road and road-only transportation in Europe: A comprehensive simulation study

Intermodal rail/road transportation combines advantages of both modes of transport and is often seen as an effective approach for reducing the environmental impact of freight transportation. This is because it is often expected that rail transportation emits less greenhouse gases than road transportation. However, the actual emissions of both modes of transport depend on various factors like vehicle type, traction type, fuel emission factors, payload utilization, slope profile or traffic conditions. Still, comprehensive experimental results for estimating emission rates from heavy and voluminous goods in large-scale transportation systems are hardly available so far. This study describes an intermodal rail/road network model that covers the majority of European countries. Using this network model, we estimate emission rates with a mesoscopic model within and between the considered countries by conducting a large-scale simulation of road-only transports and intermodal transports. We show that there are high variations of emission rates for both road-only transportation and intermodal rail/road transportation over the different transport relations in Europe. We found that intermodal routing is more eco-friendly than road-only routing for more than 90% of the simulated shipments. Again, this value varies strongly among country pairs.     

Situation analysis forecasting: the case of European maritime clusters

Within the literature concerned with aspects of competitiveness, innovation and strategic management of industrial clusters, the body regarding forecasting of strategic management is still nascent. This work aspires to render a contribution within the domain of strategic management forecasting, through the indicative case of European maritime clusters. For this end, a two-tier model is formulated. A quantitative strengths, weaknesses, opportunities, and threats (SWOT) methodology that derives from the fusion of a quondam situation analysis and crosstabs’ theory is generated. This leads to the utilization of the crosstab’s conditional probabilities as transition probabilities; the latter are called to compile the transition matrix of a Markov chain. Through this methodology, and the successive Markov chain’s transition matrices, strategic forecasts are extracted for a devised European maritime cluster case. This work relinquishes a novel application with respect to strategic management forecasting, that provides a dichotomy of practical interpretations and scenarios for quantitative situation analysis. Thus, it may enable effective real-time decision-making for strategic management and/or policy drafting. The situation analysis forecasting model may find applicability in a plethora of practical and theoretical cases, wherein forecasting may be desirable. It may as well pertain to an intrinsic methodology for situation analysis forecasting of maritime clusters.     

受侧向冲击的混凝土墩柱本构模型对比

采用ANSYS建模和LS-DYNA显式动力分析的方式,分别使用HJC、脆性损伤、盖帽和混凝土损伤等4种混凝土本构模型,对钢筋混凝土墩柱的侧向冲击过程进行仿真。从系统能量的角度验证数值计算的正确性;并将冲击过程中的冲击物块加速度和钢筋应变的历时值与试验值进行对比,进一步证实仿真计算的正确性。从各本构模型的计算结果、模拟所耗费的计算时间以及所需的参数数量等方面进行对比。     

吹填土对筒型基础结构工作性能的影响

针对吹填土对筒型基础结构工作性能影响的问题,进行三维有限元模拟研究。采用大型通用有限元软件ABAQUS建立筒型基础结构与吹填土相互作用的三维弹塑性模型,模拟在波浪荷载和不同厚度吹填土作用下筒型基础结构各点土压力的变化趋势,揭示筒壁所承受土压力的分布规律以及不同厚度吹填土的影响。该结果为防波堤的筒型基础结构稳定性验算提供了依据。     

柳江红花二线船闸输水系统布置与水力学模型试验研究

红花二线船闸是广西西江黄金水道首批重点建设项目,是提升柳江及西江通航能力、实现西江亿吨黄金水道的重要工程,其闸室规模与三峡船闸一致、工作水头近20 m、输水能量巨大。结合工程特点,选择了闸底长廊道侧支孔输水系统,设计了输水系统具体布置,并提出采用汇合廊道改善单边阀门运行输水流态的措施。通过比尺为1∶30的物理模型试验,对不同阀门运行工况下输水系统水力特性、闸室船舶停泊条件、进出水口水流条件等开展研究,推荐了使水力指标满足规范和设计要求的阀门开启方式。