Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

整体推进式桩基码头结构设计与施工

针对在拉美和非洲地区部分码头建设中,存在大型船机设备缺乏和长周期波较为明显、常规打桩船作业和预制构件安装困难的问题,基于一般桩基码头结构,在设计和施工两个方面进行优化,采用桩顶施工行走平台方法施工,利用桩基自身作为支撑结构,大量采用叠合式上部结构,实现将海上施工转化为陆上施工的创新,形成整体推进式桩基码头结构,规避大型船机设备缺乏和长周期波较为明显的问题,具有良好的经济性和对强震区的适应性。     

大型升船机卷筒与主轴连接技术

大型升船机承载能力大,若卷筒与主轴仍采用常规连接形式很难满足要求。分析了卷筒与主轴的各种连接结构,针对景洪升船机开发一种新的连接技术,解决了加工和装配的工艺难题。通过理论计算确定结构尺寸,成功完成了16件大型卷筒装置的设计生产加工。     

干线公路高模量沥青混凝土应用研究

文章试验研究了不同PR/RA改性剂掺量的高模量沥青混凝土(HMAC)的抗车辙性能,分析了层位、层厚、模量、轴载、温度和荷载次数等因素对高模量沥青混凝土路面抗车辙性能的影响程度,提出了合理的路面层位设置、模量取值范围及路面结构组合,并通过某干线公路试验路段,验证了高模量沥青混凝土的抗车辙效果。     

轴舵系照光找中工艺流程优化

在轴舵系照光找中方面,虽然传统拉线法设备简单、操作简便,但由于钢丝本身存在挠度,导致测量精度无法保证。随着超长轴系船舶不断增多和船舶建造精度的不断提高,拉线法已不能满足当前船舶建造精度的需要。优化后的轴舵系照光找中工艺采用光学仪器与激光设备代替拉线,所测量的数据更精准、更直观。经多型船实践证明,新的轴舵系照光找中工艺,通过改变过去照光的生产技术,不仅提高船舶建造效率和质量,而且为船厂进一步节约建造成本。     

硫酸盐还原菌对高桩码头抗震设计的影响

国际上高震区高桩梁板码头抗震设计往往采用基于位移的抗震设计方法,且采用钢管桩结构较多,而硫酸盐还原菌(SRB)能在极短时间内对钢管桩造成严重的腐蚀,危害极大。针对SRB的腐蚀机理,提出3种主要防护措施,并对物理防护法的3种不同工程应用方案进行对比研究。结合菲律宾马尼拉某集装箱码头工程设计,采用控制变量法,对3个方案分别进行push-over推覆分析求解。计算结果表明,覆盖层保护法及钢管桩泥面处局部填充混凝土法的结构抗力较大且结构延性较好。对类似工程环境的码头结构设计具有借鉴意义。     

长江大保护战略下河口滩涂的保护对策研究

针对长江来沙持续减少引起河口滩涂侵蚀日益严峻的现象,提出长江口滩涂保护的重要性;并以九段沙、横沙东滩为研究典型,探讨分析不同定位滩涂宜采取的不同保护对策。结论如下:对于生态保护区滩涂,宜通过改变外围环境实施滩涂保护、促进滩面缓慢淤涨;对于非生态保护区滩涂,可采取积极主动的护滩措施,且可通过工程有目的地培育高-中-低滩有序分布的滩涂基底,在实现滩涂资源稳定的基础上提升滩涂生态品质,增强滩涂区域功能,积极响应长江大保护战略。     

浅埋暗挖地铁隧道施工监测方法

文章以重庆市地铁一号线大坪车站临时施工便道为例,对在浅埋、软岩条件下既有隧道拆除采用工字钢支顶、风镐破岩,新建隧道采用台阶法环形开挖预留核心土、人工非爆破开挖的施工方法,通过现场监控量测,得出最大地表沉降仅为3.82mm,表明采用合理的施工方法可以减少地表沉降。     

基于湿度应力场理论的膨胀土边坡稳定分析

边坡土体中的膨胀力是导致膨胀土边坡失稳的主要原因之一。文章基于湿度应力场理论,采用ANSYS软件的热传导分析功能模拟分析边坡的降雨入渗以及膨胀变形,并采用有限元强度折减法对不同条件下边坡安全系数进行计算,分析了膨胀土边坡稳定规律,为膨胀土边坡处治提供理论依据。