数控车削加工仿真系统的研究与实现

介绍一个数控车床加工仿真系统,系统实现了对数控代码的词法、语法检验并将代码翻译成动画仿真所需的数据格式．通过在计算机上动画演示加工过程来检验数控代码的正确性．使用该系统可以实现高效率、低成本的培训．     

线接触零件磨损仿真的温度研究

磨损是摩擦学研究中的重要领域之一．然而，现行的磨损研究方法普遍采用大量的模拟试验来进行经验性的探索．而且，在磨损量计算中只考虑压力的影响．在考虑压力对磨损影响的同时，加入了温度影响因素，利用仿真技术对磨损量进行计算机模拟，提出了线接触零件磨损的数值仿真通用模型．对后续线接触零件磨损仿真的研究具有很大的指导意义．     

Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

Laser shock forming (LSF) of sheet metal is a new technique realized by applying an impulsive pressure generated by laser-induced shock wave on the surface of metal sheet.LSF of brass sheet metal was investigated using a Q-switched Nd:YAG laser with an energy per pulse of 15～50 joules.ABAQUS software was used to simulate laser shock forming process.The central displacement of the shocked region is measured and compared with the simulation.The higher pulse energy, the higher central displacement of the shocked region were obtained.The deformation of the simulation matches the experiment quite well.     

Bi-phasic Simulation of Metal Injection Moulding： Constitutive Determinations

IntroductionMetalinjectionmolding (MIM )isexpectedtobeveryefficienttoproducesmalland 3Dcomplicatedpartsinlargeseries .Thistechnologycombinesthewell knownpolymerinjectionmouldingandpowdermetallurgytechnology .AnMIM processincludesfourmainstages[1,2 ] :them…     

基于OVM模型的交通流混沌研究

研究基于OVM模型的交通流混沌问题。用Matlab结合C 语言编写OVM模型的仿真程序来产生交通流时间序列。在一定的参数组合下,仿真研究交通流车队中不同序号的前后车辆之间的车头间距变化过程。通过分析这种车头间距变化过程的变化曲线并利用小数据量方法计算Lyapunov指数,证明了基于OVM模型产生的交通流中存在着混沌现象。讨论模型参数和仿真试验参数对该理论交通流运动状态的影响,给出相应的仿真研究结果,得出对于研究与应用交通流理论有益的结论。     

A New Explicit Algorithm for Bi-Phasic Mixture Flow in MIM

Metal injection moulding (MIM) is a new technology to manufacture small intricate parts in large quantity. Numerical simulation plays an important role in its development. To predict the specific segregation effect in MIM injection, mixture theory is adopted to model the injection flow by a bi-phasic model. This model conducts to the solution of two-coupled Stokes equations. It is an extremely computational consuming solution in the scope of the traditional algorithms, which induce a serious challenge to cost-effectivity of the MIM simulation. Referred to some methods proposed by Lewis in mono-phasic simulation and the implicit algorithms in MIM simulation, a new explicit algorithm is proposed and realized to perform efficiently this type of bi-phasic flow. Numerically this algorithm is devised to perform the simulation in a fully uncoupled manner except for a global solution of the pressure field in each time step. The physical coupling is taken into account in a sequential pattern by fractional steps. This special algorithm does not need any iteration, so it is straightforward and robust, suitable for MIM simulation and other sorts of simulations for multi-phasic flow.     

虹桥综合客运枢纽车道边规模论证与仿真评价

采用理论计算与软件仿真相结合的方式,依托对现有虹桥机场与浦东机场车道边上落客特征调查数据分析,对规划中的虹桥枢纽车道边的适用规模进行建模论证,并通过仿真软件对不同车道边形式的集散效果进行评价,可为虹桥综合客运枢纽的规划设计提供理论和技术支撑。     

新建单线铁路车站股道数的设置

采用单线铁路车站股道数的简单分析模型、排队论分析模型和模型分析模型，分别就技术站、限制区间两端车站、一般会让站等不同类型的车站股道数进行了分析。确定股道数量时，应满足技术停站、限制区间、远期规划及旅客列车提速要求。     

Investigation of Wall Pressure Fluctuations in a Turbulent Boundary Layer by Large Eddy Simulation

Large eddy simulation (LES) was used to investigate the space-time field of the low Mach number, fully developed turbulent boundary layer on a smooth, rigid flat plate. The wall-pressure field simulated by LES was analyzed to obtain the pressure statistics, including the wall-pressure root-mean square, skewness and flatness factors, which show the wall pressure distribution was not Gaussian. The profile of the auto-power spectral density and the contour of the streamwise wavenumber-frequency spectral density of wall-pressure were plotted. The "convection ridge" can be observed clearly and the convection velocity can be calculated from the location of the convection peak.     

不同流速流向下的某型空投水雷水下散布研究

对某型空投水雷在不同流速流向条件下的水下不同深度的散布进行了仿真研究.分析了空投水雷水下无动力运动过程中雷体和尾翼的受力情况,并在运动受力分析的基础上给出了研究其水下散布的数学基础--水下无动力运动弹道仿真数模.用Matlab软件编写了空投水雷水下散布仿真程序,并对不同流速流向条件下多种初始条件的水下不同深度的散布进行了研究,给出了仿真结果和分析.