基于GIS的多模式动态网络装载程序设计研究

给出了一个基于GIS的多模式动态网络装载程序设计流程。首先，给出了一个新的基于GIS的框架，使之能够用于动态的交通数据的融合、分析以及可视化。这个框架的主要特征是将用于显示空间地图数据与用于动态网络装载的动态交通信息融入统一的体系中。而后给出了相应的多模式动态网络装载程序流程，包括：数据输入，数据预处理以及相应的多模式动态网络装载程序。最后，给出了相应的仿真试验以及结论。     

桥梁混凝土水管冷却温度场有限元分析

针对混凝土水管冷却温度场的计算问题，分析了当前冷却水管有限元分析的主要方法，对多重网格法进行有效的处理，从而在不增加计算时间的前提下能更准确地计算出水管冷却温度场。基于这种处理方法，结合通用软件ANSYS对某高墩大跨刚构桥桥墩混凝土水管冷却温度场进行了仿真分析，计算结果与实测数据比较表明该方法计算精度是较高的。     

高速公路危险点控制管理研究

针对高速公路交通安全管理的特征和需要，引入危险点控制管理的思想，比较详细地阐述了危险点控制管理的概念，性质，特点和原则，探讨了危险点评价，确定，分级和系统综合分析的方法，并在此基础上，就危险点控制管理机制建设提出了一定的设想和建议。     

Inventory,Classification, and Analysis of Special Management Areas Associated with U.S. Coastal Programs

Area-based management approaches may be beneficial in integrating sectoral, single-purpose laws and regulations; however, these benefits may not be attained if special area designations are equally sectoral or single-purpose in nature. Over 60 types of special management areas were documented under U.S. coastal programs, and a new classification scheme was developed to allow comparisons and analyses across programs. Results indicate that requirements and incentives for special area designations under the Coastal Zone Management Act did little to standardize or influence area-based management systems associated with state and territory coastal programs. Further, the absence of clear patterns within and between coastal programs with respect to special area policies suggests a limited commitment to this important aspect of coastal management. Continued research is needed to document the effectiveness of the various area-based management approaches presented in this article.     

Technical Note: Force Control in Electrohydraulic Active Suspensions Revisited

The inner loop control for the actuator force can be quite simply compensated by means of a correction term to the desired force signal at the input. The correction requires only a measurement of the actuator piston velocity and is employed to cancel the loop disturbance caused by the oil flow to the actuator. Although an additional time constant is introduced by the integration in the inner loop force control, the overall performance is nevertheless quite close to that of an ideal optimal system.     

基于风险网络的轨道交通车辆风险评价

针对轨道交通车辆系统的风险网络和关键部件风险评价开展研究，以系统部件和部件连接关系作为节点和边，建立了风险网络模型，分析了节点固有风险的影响因素和计算方法.根据节点之间故障传播概率得到边的作用强度和路径风险.对节点固有风险和路径风险进行分析，得到节点综合风险，并通过幂法对节点综合风险进行求解，从而识别部件对系统的影响程度.以转向架系统为例进行综合风险计算，结果表明：部件固有风险大小不能完全决定综合风险大小，还与部件连接关系和作用强度相关；与实际经验得出的关键部件综合风险排序对比，利用本文方法得到的关键部件排序一致性与其他方法相比有明显提升.     

Integrated coastal water monitoring

Geographical Information Systems (GIS) are important took for environmental monitoring and management. However, their limitations in dealing with complex, dynamic, and mission‐critical situations call for alternative approaches. Integrating GIS with dynamic simulation models offers one such solution. Numerical models that simulate physical, chemical, and biological processes greatly increase our understanding of the environment. Many of these models use refined forecast information to accurately predict processes that help in monitoring and managing the environment. Integrating these models with GIS offers new functionalities. The present research couples the MIKE21 comprehensive modeling system for two‐dimensional free surface flows with the spatial analysis strengths of the ArcView GIS. The southern coastal water system of Singapore serves as the study area. The aim is to develop a comprehensive software system that provides support for both environmental managers and land‐use planners in making their decisions.     

汽车玻璃升降器失效控制技术

随着经济社会的持续快速发展,汽车玻璃升降器构造技术迎来了前所未有的重大发展机遇,如何采取有效控制技术方法,全面提升汽车玻璃升降器运行效果,成为业内广泛关注的焦点课题之一。基于此,本文首先介绍了汽车玻璃升降器的基本组成与原理,分析了汽车玻璃升降器的失效分析与处理技术,并结合相关实践经验,分别从严格执行玻璃升降器技术规范要求等多个角度与方面,探讨了优化汽车玻璃升降器失效控制效果的有效策略,阐述了个人对此的几点浅见,望对汽车玻璃升降器失效控制实践有所裨益。     

钢网面板加筋土挡墙动力特性试验的变形研究

基于泥质红砂岩粗粒土填料，采用MTS分别模拟地震荷载、交通荷载、加-卸载多循环荷载进行大尺寸模型试验，研究了钢网面板土工格栅加筋土挡墙在上述荷载作用下的动力特性，获得了不同峰值的水平地震激励下模型挡墙不同位置的水平动位移、竖向动位移峰值响应等实测值；采用不同频率、不同幅值的竖向交通荷载正交试验法，获得了该模型挡墙在重复荷载作用下的最大水平变形、最大沉降量及位置等动力特性参数值；通过7种荷载、21组加卸载循环试验，获得了加一卸载多循环荷载作用下的实测沉降值。试验结果表明：该加筋结构具有整体变形的特性，是优良的抗震结构，能承受抗震设防烈度为9度的地震荷载；同时该加筋结构具有良好的稳定性和抗破坏性，重复荷载的幅值和振动次数对结构动力变形特性的影响较大，而振动频率对变形特性的影响不显著；多循环荷载作用下该加筋结构能够明显减小不均匀沉降。过长的筋材并不能明显地改善加筋土挡墙的动力特性。     

An ABS control logic based on wheel force measurement

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre–road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force.

The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.