基于杆梁模型的舰船隔振系统功率流传递特性分析

针对舰船中比较典型的静不定隔振系统，建立了柔性基础上安装4个隔振器的隔振系统物理模型。对隔振器采用杆梁模型建模，隔振上层设备采用刚体模型，导出了静不定隔振系统的动力控制方程。使用振动功率流方法对隔振系统进行了功率流分析，并利用Matlab进行编程计算，计算结果表明杆梁模型隔振器对上下两端的功率流的减少有明显效果，隔振器的内部共振特性对隔振系统振动功率流具有显著的影响。对主要设计参数进行了讨论，得出了具有工程指导意义的结论。     

关键航段江海直达船舶驾驶技术探讨

此文通过对江海直达船舶的操纵性分析,从过弯曲河段航法、过桥航法、入海河口的航法三方面对关键航段江海直达船舶驾驶技术进行了探讨。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

用PROLOG语言在第五代计算机中实现三种同步机制

以日本新一代计算机技术研究所研制的个人顺序推理机ＰＳＩ为模型，详细讨论了用ＰＲＯＬＯＧ语言在新一代计算机操作系统中实现忙式等待、信号灯、条件临界区三种同步机制的情况，并进行了评价，软件模拟程序已在微机上调试通过。     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

成昆线红层地区泥石流沟侵蚀程度量化分析

以成昆铁路红层地区的3个小流域为研究区,计算3个年份的地面割裂度及其年平均变化率,分析用地面割裂度表征泥石流沟侵蚀程度的不足及其原因。基于泥石流沟发育的物理模型,以原来的地面割裂度定义为基础,引入表述沟谷分布零散程度的异型度因子,导出新侵蚀系数公式。以3个小流域固体物质的年平均流失量作为侵蚀程度强弱的标准,采用非参数统计推断方法,将侵蚀系数、地面割裂度的年变化值和固体物质的年平均流失量作秩统计和次序统计。对秩统计参数和次序统计参数比较结果表明:在表征泥石流沟侵蚀程度方面,侵蚀系数优于地面割裂度。     

模糊数据融合技术在柴油机状态监测中的应用研究

针对传统柴油机状态监测的不足,采用模糊数据融合的方法,对多传感器测得的数据进行融合处理,实现柴油机故障的预警及柴油机状态的监测。     

网络数据融合技术在MITS中的应用研究

探讨了基于传感器网络的数据融合技术在海事智能交通系统(MITS)中的应用问题,为该领域的进一步研究提供一些有价值的思路和见解。基于目前研究遇到的困境,提出将MITS抽象成一个无线传感器网络(WSN),从而可在WSN环境下引入数据融合技术来研究海事智能交通系统中的各种信息处理问题,如船舶的定位与导航以及避碰等;紧接着,总结了现有定位、导航、避碰和船舶安全管理技术研究的现状并分析了存在的主要问题;针对基于GPS的MITS存在的种种弊端,结合各国卫星定位导航系统的建设现状,提出利用MITS内其它元素的信息和多源信息融合技术来实现船舶的相对定位和导航这一新思路;最后,从网络数据融合技术角度出发,具体指出了MITS网络融合系统构建时所必须考虑的一些基本问题,并给出该融合系统的一般性框架。     

Japanese perspective of driver information systems

A perspective view of of Japanese R&D activities of Driver Information Systems is given from the standpoint of developing joint projects by public and private sectors. First, a brief history of the R&D activities is illustrated from above mentioned standpoint. Then, two major projects, AMTICS and RACS, and the social backgrounds of these projects are explained. In order to give a clear idea of both projects some technical details are treated.Based on the history and the present status of the developments, the basic design conceptions of Japanese Driver Information Systems are explained and several factors or reasons which have influenced to the design conception are discussed. Then, the promoting systems of the R&D activities are generally explained and present status of the projects and future problems in developing more advanced systems are also handled. A brief discussion on the establishment of international standard is also mentioned as a final comment.     

铁路钢桁梁桥状态评估

以京广上行线洣河大桥为例介绍铁路钢桁梁桥的状态评估方法,为维修加固和更新改造提供依据。