箱形梁桥横隔板的作用分析

利用大型有限元分析软件ansys对庐铜高速公路段某混凝土箱形梁桥进行计算，对比分析箱梁桥在跨间设置与不设横隔板情况下的箱梁横截面正应力、抗扭刚度、以及截面变形等因素的变化，分析结果显示加设横隔板后，箱梁受力有明显改善。     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。     

侧压力系数与非同步开挖对分离式隧道影响研究

使用有限元方法进行了一系列的计算分析,探讨不同侧压力系数对分离式隧道左、右洞不同步开挖时两洞间的影响程度,并通过现场动态监控量测来验证数值模拟的正确性。结果表明：侧压力系数越大相邻隧道的影响程度越大。     

桥面铺装复合梁的有限元分析

采用三维有限元法,分析了复合梁试件模型和实体桥面铺装模型中沥青混凝土铺装层表面的受力特性及其变化趋势。计算结果表明,复合梁模型和实体桥面铺装模型中的沥青铺装层表面的受力状态相同,变化趋势一致,采用试验可控性较好的复合梁试验能够模拟不同结构组合的桥面铺装层受力特性,为大跨径桥梁桥面铺装层结构设计、材料选择提供依据。     

低温独立液舱曲面外板加工减薄量评估

基于耐低温合金材料的非线性特性,以某液化气船的低温独立液舱曲面外板加工成形过程为研究对象,研究其塑形变形过程及机理。利用ABAQUS作为计算分析工具,建立了板材原料及上、下加工模具的分析模型,给定冲压成形的时间和初始速度,并设定时间步长,考察每个时间步长的计算结果,分析了其加工过程中的弹塑性变形过程,评估了低温合金材料在加工过程中的板厚变化情况,并与实际加工测量值进行对比,验证了模型和计算分析过程的准确性。为各类低温独立液舱的设计和材料尺寸选用提供了技术支持和指导。     

船舶甲板分段纵骨焊接变形和残余应力数值模拟

基于非线性分析软件Abaqus,采用顺序耦合的热弹塑性有限元方法研究典型船舶甲板分段纵骨焊接的变形与残余应力问题。焊接过程中的温度场分析采用具有截面积分shell单元的shell/solid模型,移动热源为高斯分布与均匀体组合热源,材料考虑应变随温度变化的特性。通过与T型接头焊接实验结果对比,验证了方法的可靠性。在此基础上,计算分析了甲板分段纵骨焊接的整体变形和局部板格变形,并讨论了外板纵向和横向焊接残余应力分布规律。     

基于Femap的风帆基座局部强度分析

以上海海事大学教学实习船"育明"轮为对象,研究船舶加装风帆装置的船体结构强度问题,通过局部加强风帆基座和船体连接部分来保证风帆安装部位的结构稳定性。利用Solidworks和Femap软件建立了风帆基座和船体的有限元模型,计算得到该模型在10级风载荷下受风角度从0°~60°的应力和应变。最终结果表明,在10级风载荷下,该船风帆基座和局部加强后的船体的强度符合要求。     

横骨架式结构装载钢卷的直接强度评估

目前的结构规范中对于装载钢卷的结构构件尺寸要求仅针对纵骨架式结构。但在实船设计时,仍有部分内底（如管弄）和底边舱区域会采用横骨架式甚至混合骨架式结构布置。文章基于协调共同结构规范关于纵骨架式结构装载钢卷时计算的理论背景,采用有限元法,探讨和建立一种可行的横骨架式结构装载钢卷的直接强度评估方法流程。经实船算例分析验证了方法的可行性和合理性,表明该方法具有实际工程价值。