甲板上浪问题的二维数值模拟

以连续性方程和N-S方程为控制方程,采用源造波理论和技术,建立了具有造波和消波功能的二维数值波浪水槽,并使用VOF方法追踪自由面来模拟二维情况下的甲板上浪问题.文中就迎浪状态下的固定FPSO和横浪状态下的运动船体断面模型所遭遇的甲板上浪现象分别进行了数值模拟研究.船体的运动规律通过势流理论计算结果给定,在上浪现象模拟计算时,船体的运动采用移动网格技术实现.研究表明,计算结果与试验结果相当吻合,该方法可以用于甲板上浪现象的预报和模拟,可以用于分析预报甲板上浪对浮体的破坏作用.     

Unsteady finite-depth effects during resistance tests on a ship model in a towing tank

This paper covers an extension of the study of Doctors et al. (J Ship Res 52(4):263–273, 2008) on oscillations in wave resistance during the constant-velocity phase of a towing-tank resistance test on a ship model to the case of relatively shallow water. We demonstrate here that the unsteady effects are very prominent and that it is essentially impossible to achieve a steady-state resistance curve in a towing tank of typical proportions for a water-depth-to-model-length ratio of 0.25. This statement is particularly true in the speed region near a depth Froude number of unity. However, on the positive side, we show here that an application of unsteady linearized wave-resistance theory provides an excellent prediction of the measured total resistance, when one accounts for the form factor in the usual manner. Finally, a simple application of the results to the planning and analysis of towing-tank tests is presented.     

某国际集装箱码头给排水设计探讨

结合某国际集装箱码头给排水、消防设计,探讨无市政给排水管网码头区的给水、消防、排水管线的设计,为相似码头工程的设计提供一定的设计思路.     

基于ANSYSWorkbench的动车组水箱吊装结构强度分析

动车组车上吊装结构的设计是否合理将关系着动车组的安全运行，在对动车组车内水箱吊装结构模型合理简化的基础上，利用ANSYSWorkbench软件创建了其有限元模型，并依据标准EN12663，确定了其载荷工况，完成了对C型槽、滑块、联接螺栓的强度校核，其结果对水箱结构的设计及优化提供了参考．     

乘用车助力转向油泵储液罐材料、制备及性能研究

采用红外光谱、差热分析、物理力学试验等设备对乘用车助力转向油泵储液罐所选用原材料的结构、耐热性能和物理力学性能进行了表征及测试。试验结果表明，该产品原料以PA66为基体，耐温度〉250℃，分解温度〉390℃；拉伸强度≥70MPa，弯曲强度≥96MPa，洛氏硬度≥120，熔点264．6℃。经注射、焊接所制备的储液罐，具有良好的耐磨、耐特殊矿物油、耐热、耐冲击等性能。     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

地下水池结构抗震概念分析与研究

地下水池通常存在于大型的地下污水厂、城市雨污水泵站、调蓄池等工程中。然而地下水池结构的抗震分析存在一系列难题,如设计理论的选取、流体作用力分析、构造措施的设计、设缝形式的影响等。介绍了常用的地下结构抗震设计理论,对地下水池结构存在的问题和抗震设计特点进行了分析和总结,并通过一系列案例提出了设计中的注意点,可供相似工程参考。     

铁路罐式集装箱空箱调配优化模型及遗传模拟退火算法

针对罐式集装箱运输的特殊性,考虑重箱流和空箱流调配的综合优化,以罐箱运输费用最小为目标,建立铁路罐式集装箱空箱调配优化多商品网络流模型,并构造了1种嵌入模拟退火操作的遗传算法对之进行求解。为了使模型与算法可得到更符合实际、操作性更强的结果,给出了3种空罐箱调配的策略,作为隐含条件加入到算法求解过程中。利用自适应遗传模拟退火算法对随机生成的实际规模问题算例进行求解,并与用通用代数建模系统软件GAMS的计算结果进行对比。结果表明,前者得出的结果与最优解差距不大,而且运算速度更快,更能满足解决实际问题的需要,为铁路罐箱调配优化提供了良好的决策支持模型和算法。     

大体积无粘结预应力混凝土卵形消化池施工技术

以武汉三金潭污水处理厂项目中2座13900m^3卵形消化池工程为实例，概要介绍了消化池施工特点及整体方案，以及伞形模架系统设计及安装、大体积混凝土、无粘结预应力施工等关键技术。伞形模架系统的成功实践，是对卵形消化池传统模板施工工艺的一次技术革新，同时对其他类似曲面体构筑物的施工也具有很大参考价值。     

树脂运输罐式半挂车的结构

介绍了树脂运输罐式半挂车的工作方式和工作流程，整车布置及主要部件结构。