登高平台消防车操作要点及在灭火救援中的应用

充分认识和了解登高平台消防车的结构特点,明确它的操作要点,明确它在灭火救援中的应用,才能确保其使用过程中的安全性和可靠性。     

摆式车辆液压缸载荷的确定

详细介绍了摆式车辆液压倾摆系统的机构动作、车体复原力矩与液压缸脉冲加载时间的确定和液压缸载荷的计算。     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

ISG hybrid powertrain: a rule-based driver model incorporating look-ahead information

According to European regulations, if the amount of regenerative braking is determined by the travel of the brake pedal, more stringent standards must be applied, otherwise it may adversely affect the existing vehicle safety system. The use of engine or vehicle speed to derive regenerative braking is one way to avoid strict design standards, but this introduces discontinuity in powertrain torque when the driver releases the acceleration pedal or applies the brake pedal. This is shown to cause oscillations in the pedal input and powertrain torque when a conventional driver model is adopted. Look-ahead information, together with other predicted vehicle states, are adopted to control the vehicle speed, in particular, during deceleration, and to improve the driver model so that oscillations can be avoided. The improved driver model makes analysis and validation of the control strategy for an integrated starter generator (ISG) hybrid powertrain possible.     

企业租用电力设备的财务效益

由于当前的金融危机，许多企业正在寻找出路，避免大额资本支出、固定资产投资和雇佣昂贵的雇员。与此同时，这些企业需要为将来经济的好转做打算，他们知道在不远的将来经济形势必有所改善，那时他们的企业必须为经济复苏做好准备。     

运行参数对双燃料船用柴油机燃烧和排放性能的影响

为研究运行参数对天然气-柴油双燃料船用发动机燃烧和排放的影响,运用AVL_FIRE仿真软件基于4190Z_LC-2型船用中速柴油机,构建燃烧室高压循环模型。通过将仿真数据和台架试验得到的缸压曲线进行对比,验证模型的准确性。采用模型仿真,研究运行参数对燃烧和排放性能的影响。结果表明:天然气替代率可以明显改善NO的排放,过高的替代率会降低指示功率,损失部分动力性;提高进气温度可改善燃烧质量,合适的进气温度可以改善动力性和经济性;提高进气压力有增压效果,适当提高进气压力可获得较好的动力性和排放性;喷油提前角的增大,会延长滞燃期,缩短后燃期,而合适的喷油提前角可以避免工作粗暴,改善柴油机动力性。     

绞吸挖泥船轴扭矩及功率测试

针对绞吸挖泥船轴扭矩及功率测试的问题,进行了现场测试和泥泵性能试验,介绍了一种绞吸挖泥船轴扭矩及轴功率测试试验装置。采用船舶应变片式轴功率测量方法,得出泥泵在850、900、950、1 000 r/min共4个转速下的泥泵性能参数;并对柴油机在945 r/min转速下,油门刻度18时的瞬时扭矩和平均扭矩进行计算。得出结论：在流量不变的情况下,泵的转速越高,扬程越高、功率越高;在流速在1~1.51 m3/s时,泥泵在4个转速下的水功率十分接近;随着流量的增大,转速越大,泵的水功率越高。     

转矩传感器磨损造成汽车跑偏的原因分析

针对市场某车型基本存在转向左跑偏的现状,根据转矩传感器的原理,对转矩传感器的主要部件尺寸进行测量分析,找出跑偏的原因,并模拟试验进行验证。     

盾构刀盘中心区域磨损研究

文章介绍了刀盘中心区域磨损的原因,并对结泥饼引起的扭矩变化进行了分析。通过工程实例对比指出,在刀盘中心区域加装搅拌棒是比较有效的解决方案。     

船舶驾驶员危险预测能力在人因可靠性评估中应用的设想

通过对复杂水域系统海事事故的特点及不同经验船舶驾驶员操船特点进行分析,结合熟练操作技能的特征,提出可采用船舶驾驶员的危险预测能力对船舶驾驶员的人因可靠性进行评价.