倒立摆的H∞控制仿真与实验

建立了一级倒立摆的奇异摄动模型,在此基础上给出了H∞最优控制,与倒立摆一般模型的H∞最优效果进行了仿真比较。同时根据对实际系统调试结果和仿真结果的比对,进一步证明了仿真得到的结论的正确性。并对所得仿真、实验结果进行分析。     

无线传感器网络安全路由协议SNEP的分析与仿真实现

以提供可靠保密通信为目标的安全路由协议的分析是无线传感器网络安全基本研究领域之一．阐述了针对无线传感器网络的攻击手段所采取的措施,研究了安全路由协议,重点研究了其中的传感网络加密协议（Sensor Network Encryption Protocol,SNEP）,并进行了仿真实现,最后针对无线传感网络的攻击方式对SNEP的安全性进行了分析．结果证明SNEP协议具有数据机密性、数据认证、防御重放攻击等安全服务．     

基于Web技术的船用传感器监控系统研制

基于Web测控技术设计船用传感器监控系统,提出该监控系统的嵌入式体系结构。以嵌入式微控制器SST89E564为核心,构建在机舱局域网之上,由TLC2543、SST89E564片内定时计数单元分别实现模拟量、数字量的测量。该装置采用B／S架构,可为远程终端由IE浏览器直接调用,实时提供重要监测参数。     

永磁无刷直流电机霍尔位置传感器的安装

永磁无刷直流电机在各行各业的应用越来越广泛。在永磁无刷直流电机中,霍尔位置传感器经常用来测量电机的转子位置和转速。转子位置传感器的安装精度直接关系到永磁无刷直流电机的运行,因此如何安装传感器是非常重要的。本文结合作者多年从事无刷直流电机开发的经验,提出了简便易行的霍尔位置传感器安装方法。     

公路桥梁结构智能超载报警系统研究

结合工程实践．分析了常规桥梁结构检测与诊断技术存在的缺陷,提出了利用光纤传感技术时桥梁的承载能力进行监测的思路和研究方向。     

超声波流量计探头参数的选择

以时差法为例,分析了超声波探头中超声射线入射角及振荡频率对测量精度的影响,给出了探头的选择原则。     

直接优化解析姿态确定方法

基于惯性系的姿态确定方法是近阶段关于动基座姿态确定问题的热点研究方向,分析了惯性系姿态确定方法的误差源产生机理,发现传统的惯性系首先解析出起始姿态阵,继而通过惯性器件量测输出,更新至当前姿态完成姿态确定,这一更新过程不仅加大了计算量,同时会重新引入器件误差和系统误差。因此,针对这一问题提出了一种基于惯性系的瞬时姿态阵解析姿态确定方法。该方法直接解析出当前时刻的姿态阵,避免姿态更新过程中引入误差,充分发挥了优化解析法的优势,对准精度得到大大提高,并利用仿真和实测数据验证了算法的可行性和有效性。     

Shared autonomous electric vehicle (SAEV) operations across the Austin,Texas network with charging infrastructure decisions

Shared autonomous vehicles, or SAVs, have attracted significant public and private interest because of their opportunity to simplify vehicle access, avoid parking costs, reduce fleet size, and, ultimately, save many travelers time and money. One way to extend these benefits is through an electric vehicle (EV) fleet. EVs are especially suited for this heavy usage due to their lower energy costs and reduced maintenance needs. As the price of EV batteries continues to fall, charging facilities become more convenient, and renewable energy sources grow in market share, EVs will become more economically and environmentally competitive with conventionally fueled vehicles. EVs are limited by their distance range and charge times, so these are important factors when considering operations of a large, electric SAV (SAEV) fleet.This study simulated performance characteristics of SAEV fleets serving travelers across the Austin, Texas 6-county region. The simulation works in sync with the agent-based simulator MATSim, with SAEV modeling as a new mode. Charging stations are placed, as needed, to serve all trips requested (under 75 km or 47 miles in length) over 30 days of initial model runs. Simulation of distinctive fleet sizes requiring different charge times and exhibiting different ranges, suggests that the number of station locations depends almost wholly on vehicle range. Reducing charge times does lower fleet response times (to trip requests), but increasing fleet size improves response times the most. Increasing range above 175 km (109 miles) does not appear to improve response times for this region and trips originating in the urban core are served the quickest. Unoccupied travel accounted for 19.6% of SAEV mileage on average, with driving to charging stations accounting for 31.5% of this empty-vehicle mileage. This study found that there appears to be a limit on how much response time can be improved through decreasing charge times or increasing vehicle range.     

一种单片机控制的水温测试系统

由于现代多样的电子控制技术和电子控制理论的迅猛发展,高精度的机械在各类工业控制系统、生产线等方面的需求越来越大.其中以单片机为核心实现的数字控制器,因其体积小、简便易行等优点,而被广泛应用于各行各业.本文将单片机的温度控制系统作为设计核心,通过温度传感器、单片机等软件系统图,并利用软件编程,从而达到实现水温控制的目的....     

新建地铁控制中心大屏幕系统的设计优化

地铁控制中心的大屏幕系统能够便捷地为调度人员提供直观的信息显示,但也因为能耗大、维护成本高等诸多原因而饱受争议.分析了大屏幕系统在使用过程中存在的争议,提出了大屏幕系统设计的优化和改进措施.随着运营需求的不断增加和对大屏幕系统要求的不断提高,在进行大屏幕系统设计时,必须在合理规划运营需求的同时,积极探讨和使用新技术、新工艺.