极早期烟雾报警系统在列车中的应用分析

分析列车起火因素,介绍典型火灾发展的过程,阐述传统早期烟雾报警系统的缺陷和极早期烟雾报警系统在列车中应用的优势,并给出极早期烟雾报警系统在列车中的初步应用方案。     

Total cost analysis: An alternative to benefit-cost analysis in evaluating transportation alternatives

This paper explains the theory in support of total cost analysis (TCA) to compare transportation system alternatives. The full costs of each alternative are first aggregated, including travel time costs and monetizable environmental and social costs. Many costs which are considered on the benefits side of the equation in benefit-cost analysis (BCA) as "cost savings" are brought over to the costs side. Total cost differences among alternatives are then traded off against their estimated non-monetized benefits or impacts, just as a consumer trades off product quality against cost before deciding which product he or she will buy. One advantage of TCA over traditional BCA is that the concept of "total cost" is more easily understood by the public and by political decision-makers than BCA concepts such as "net present worth", "benefit-cost ratio" and "internal rate of return". A second advantage is that there is no suggestion that all "benefits" have been considered; decision-makers are free to use their own value judgements to trade off total cost against non-monetizable social, environmental and economic impacts, just as they trade off quality and convenience against cost when purchasing goods and services in their roles as consumers. The TCA approach is demonstrated in this paper through a case study of two systemwide alternatives for the Baltimore, MD urban area.     

基于弹性动力分析的工程机械集成化设计系统

为了解次目前国内工程机械设计中由于动力学分析水平和设计效率较低而造成的产品性能落后这一长期存在的问题，首次引入弹性动力分析理论建立了工程机械工作装置的通用弹性动力分析模型，以此为基础建立了工程机械动力学仿真系统，并建立了工程机械方案设计与部件选型专家系统以实现总体方案设计、部件选型和整机动力匹配的自动化，最后利用信息集成技术建立了基于弹性动力分析的工程机械集成化设计系统。     

考虑荷载历史的既有桥梁结构可靠度分析方法

针对既有桥梁结构的特点,建立了考虑荷载历史的可靠度分析模型,并讨论了其计算方法。应用所研究的方法,对一座实际钢筋混凝土桥梁的承载能力可靠度进行了分析和评估;结果表明,荷载历史对该桥可靠度提高的影响不容忽视。     

微型客车白车身模态分析

建立了某微型客车白车身结构的有限元模型，计算了在自由状态下该白车身结构的振动模态，并提出了鉴别整体模态与局部模态的方法。计算结果与试验结果进行了对比分析，结果表明所建立的有限元模型基本反映了原结构的振动特性。     

UD63型尼桑汽车起动和充电系控制电路及故障排除

系统地介绍UD63型尼桑汽车起动系和充电系控制电路的原理及故障分析,并给出检修实例。有利于准确、快速地排除该类车型的故障。     

柴油机活塞组耦合模型有限元分析

建立了活塞、活塞环、活塞销和缸套的耦合模型，采用接触对、设定接触热阻的方法对耦合模型进行了二维和三维瞬态温度场的分析。对采用接触模型和粘贴方式模型的分析结果做了比较。对活塞组的机械负荷及热负荷做了耦合场静态分析。     

桑塔纳汽车后桥强度有限元分析及改进方案

根据桑塔纳2000汽车后桥的实际结构，利用通用有限元软件ANSYS，对后桥进行了弹塑性静态结构有限元分析。主要研究了结构焊接处强度、横梁破坏处在半个周期载荷波内应力状态变化；给出了在最大剪应变幅平面上，影响疲劳强度及寿命的基本参量的计算结果；提出了提高后桥强度的改进方案。     

Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

胶焊,点焊和胶接接头应力分布的比较分析

采用三维弹塑性有限元数值分析方法，比较了分析了胶焊，点焊和胶接接头的应力分布情况，结果表明，胶焊接头与胶接接头的应力分布特征值基本相同，仅在焊点区内略有区别，胶焊接头中的胶粘剂有效地降低了点焊接头中焊点的应力，消除了其焊点过级处的应力集中，所得应力分布可合理解释已有强度试验结果。