桩侧及桩端后注浆对超长桩承载力的影响

以海南省某跨海大桥为工程背景,采用平行对比试验法,以桩侧桩端后注浆及施工桩长为变量,对3根超长灌注桩进行了竖向抗压静载试验,并对试验过程中试桩穿越各土层的分段侧摩阻力及桩端阻力进行测试。通过比对试验结果,分析桩侧桩端后注浆对超长灌注桩承载力性状、荷载传递规律及桩侧、桩端阻力发挥特性的影响。结果表明:进行桩侧、桩端后注浆能显著提高超长灌注桩的承载能力,减小桩基沉降;对于超长灌注桩,桩侧注浆对承载能力的增加效果远远大于桩端注浆;桩侧桩端注浆后,超长桩的荷载传递规律不变,依然是上部侧阻力先于下部侧阻力激发;桩侧注浆处土体表现出与桩体水泥胶结的性质,其抗剪强度较大且随位移增长而增加得更快。     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

基于BIM的铁路路基三维建模方法研究

对基于Bentley平台的铁路路基三维建模方法展开探索和研究:(1)对路基建模方法的研究现状进行总结,认为基于网格和参数化的建模方法较为适用。(2)根据路基结构的造型特点,将路基结构物分为线状构造物和不连续构造物。(3)连续线状构造物建模主要分两步,一是通过编辑横断面构建路基骨架,二是采用放样、拉伸横断面的方式构建路基网格模型,再通过三维可视化检查模型的合理性。(4)对于不连续构造物,如挡土墙、地基处理桩等构件,应采用参数化的建模方法。     

电动汽车充电桩安全管理研究

随着国家对环境保护和能源节约的重视以及新能源政策的实施,电动汽车行业迎来了快速发展。充电基础设施的建设,是加快电动汽车推广的重要需要。电动汽车充电基础设施建设和运营业务发展的机会也极大,随之而来的安全管理工作要求也越来越高。本文依据充电桩建设和运营的特点,剖析其中面临的安全风险,并提出加强安全管理工作的措施,为充电桩企业安全管理运营提供参考和借鉴。     

Design and Application of Micropiles on Treatment for Landslide of High-speed Railway

Research purposes: The micro-pile has been used in foundation replacement, building reinforcement, retaining soil reinforcement, but the design and calculation theory of the micro-pile is seriously lagging behind. The design and calculation method and content of the micro-pile are not clear, and there are no relevant regulations. In this paper, the design and calculation method of landslide treatment by micro-pile is discussed, and its effect is monitored and analyzed. Research conclusions: (1) There are many advantages such as flexible construction and high construction efficiency. For landslide project with limited terrain, micro-pile has good governance effect and adaptability. (2) The monitoring data show that it is appropriate to adopt micro-pile treatment in the landslide project. After the micro-pile reinforcement treatment, the deformation of the landslide project has been quickly and effectively controlled, and the safety of the tunnel and roadbed engineering has been guaranteed. (3) The design content of the micro-pile should include the overall stability, the length of the pile, the pile spacing, and the reinforcement of the pile. (4) This paper can provide guidance for the design and construction of using micro-piles to control railway landslide. © 2021, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

大型浮式结构物结构碰撞性能分析

碰撞事故是基于事故极限状态设计重点考虑的对象,在设计中越来越受到重视。文章以某大型浮式结构物为研究对象,总结分析ISO、API、HSE、DNV、ABS、BV、LR等标准及规范对碰撞场景的相关规定,提出碰撞分析场景及设计衡准;基于简化分析技术建立碰撞力学模型,利用动态非线性结构分析软件ABAQUS进行仿真分析,通过分析塑性应变、塑性变形、吸能、碰撞力及运动等,校核评估舷侧结构的耐撞性能;分析不同碰撞位置、撞击船型式等对碰撞性能的影响。研究表明:目标大型浮式结构物舷侧结构碰撞事故极限强度满足规范要求,首柱撞击相对比较危险,可作为计算分析控制工况。     

基于临界面理论的焊接结构多轴疲劳寿命评估方法

目前多轴疲劳理论难以用于实际工程中焊接结构的疲劳寿命评估.文章将等效热点应力法与双参数临界面理论相结合,提出了一种能够应用于复杂焊接结构的多轴疲劳寿命评估方法.分别阐述了双参数临界面法的损伤参数、控制方程以及等效热点应力的定义,给出了焊接结构多轴疲劳寿命的评估过程,并应用有限元数值模拟验证了该方法的可行性.     

不同数值积分方式对海洋结构物疲劳裂纹扩展模拟结果的影响

海洋结构物的疲劳寿命预报是当前的研究热点,文章根据第二作者率领的课题组提出的海洋结构物疲劳寿命预报统一方法比较了疲劳裂纹扩展模拟的三种数值积分方法：逐周数值积分法、△N积分法和△a积分法,并分析了每种方法的适用条件。随后,以中心表面裂纹承受单向交变拉伸载荷的平板为例,分别运用三种方法计算了裂纹扩展寿命和最终裂纹尺寸。同时,研究了△N和△a取值不同对结果的影响。最后,综合考虑计算耗时和计算结果精度,给出了△N积分法和△a积分法的建议值,即△N/N≤1.0%,△a≤0.1 mm。