12000 t抬浮力打捞工程船电力系统

针对12000t抬浮力打捞工程船,在概括介绍其船型特点的同时,对其电力系统以及在系统设计时需要注意的一些问题进行了详细描述,为同类电力系统设计提供参考.     

乌江思林和沙沱升船机船舶超吃水可行性研究

针对乌江思林、沙沱两座升船机船舶1.6 m吃水控制标准导致载货量偏低的实际问题,开展超吃水船舶进出升船机船厢系统性的实船试验,论证船舶吃水标准提升的可行性。结果表明,船舶出厢为控制性工况,2.0 m吃水船舶正常出厢实测最大下沉量16.46 cm,富余水深大于30 cm;基于实船试验数据改进的下沉量预测公式,将船舶实际下沉量预测精度提高1倍以上;按目前2座升船机运行水位协调机制,上下游水位变化在10 cm以内,船舶最大吃水提升至2.0 m是可行的。建议在运行中按照1.8~2.0 m吃水逐步放宽控制标准。     

铝合金在邮轮主船体结构上的应用分析

基于铝合金与钢结构“等强、等刚、等稳定性”的理论和有限元计算方法的分析,对某邮轮主体结构进行替代等效分析,论证了铝合金结构的安全性、经济性以及可能性,为铝合金在邮轮主船体结构的应用和直接计算方法提供建议和参考。     

Valuation mismatch and shipping q indicator for shipping asset management

ABSTRACT

This paper aims to develop an adaptation of the Tobin Q investment model for the shipping asset management in order to monitor valuation mismatch and bubble pricing of shipping assets. In this circumstance, the market prices of various shipping assets (e.g., Capesize or Panamax dry bulk carriers in different age profiles) are compared to the measured long-term asset value with second-hand ship prices. The mark-to-market prices of shipping assets are led by current market trends and freight rates, while the long-term asset value is estimated by using past data under certain assumptions (mean reversion, trend reversion). The discrepancy between market prices and the long-term nominal value of a shipping asset reflects any mispricing, which in turn sheds light on investment timing and market entry-exit decision.     

Overview of maritime research publications by the late Professor Richard O. Goss

We lost one of the great maritime scholars in 2017—Professor Richard Goss, who is considered one of the founders of maritime economics. He was a pioneer and a most influential leader in establishing the discipline of maritime economics worldwide. This paper revisits his research by examining major issues and assessing his arguments by surveying empirical works that have been conducted after his works in the literature. His economic thoughts are based on laissez-faire, welfare economics, and Marshallian economics. Comparing his arguments with major findings in ensuing research, several research directions are suggested.     

全舰（船）统一姿态基准系统中甲板变形分析

为了研究舰船甲板的变形,此文对甲板结构进行了简化,建立了甲板受力的数学模型。分别在舰船处于中垂和中拱两种状态下,对舰船甲板受横向载荷、总纵弯矩及两者共同作用下的变形进行了计算。     

A theory of coupled beams for strength assessment of passenger ships

This paper describes a coupled beam method, which estimates elastic response in the longitudinal bending of a passenger ship with a large multi-deck superstructure. The method can be applied during an early project stage, when detailed three-dimensional finite element modelling is not yet possible. The theory is based on the assumption that each deck in the superstructure and also the main hull can be considered as a thin-walled beam. These beams are coupled to adjacent beams with springs modelling vertical and shear stiffness. The shear effect in the side and deck structures is included with options for large openings. As a result, the method allows for the calculation of the normal stresses and vertical deflections in the arbitrary location of the hull girder. Average longitudinal displacements of deck structures and shear stresses in the side structures can be estimated as well. Simplified structures were analysed in order to validate the coupled beam method against the three-dimensional finite element method.     

舰船RCS整形设计中的电磁分析

采用物理光学法导出了金属平板RCS与倾斜角的理论公式，讨论了在舰船RCS整形设计中如何采用该公式进行折衷设计和电磁分析。     

利用伪力法计算带限位器的船舶设备隔振系统冲击响应

建立了带限位器浮筏隔振系统的非线性系统模型,利用伪力(pseudo-forces)法计算了带有限位器的浮筏隔振系统模型的冲击响应,分析了限位器参数对冲击响应的影响.设计制作了带有限位器的浮筏隔振系统试验模型,进行了冲击试验研究.数值计算与试验结果的比较表明,伪力法在计算带限位器的舰船设备隔振系统冲击响应时的适用性和有效性.     

破损船体极限强度非线性有限元分析

本文基于通用有限元系统,结合船体破损机理和初始缺陷处理方法,建立船体极限强度非线性有限元分析的完整框架.利用对水面舰船和双壳油船极限强度模型试验的比较验证,合理解决非线性有限元分析的关键技术,并对完整和破损船体极限强度进行非线性有限元法分析.然后,在模型试验和非线性有限元分析的基础上提出面向设计的适合破损船体和双向弯曲状态的船体极限强度分析的改进解析方法.