南京长江三桥深水基础钢套箱施工

深水基础施工是大桥施工的重点,如何合理地选择其施工方案是保证大桥按期顺利完成、降低工程造价的关键。本文介绍了长江三桥钢围堰施工方案的比选及其施工要点,以供参考。     

Feasibility of localizing in vivo micro-devices with electromagnetic methods

In order to measure the location of medical micro-devices in the gastrointestinal tract, electromagnetic methods were developed considering the magnetic permeability of human bodies. Two varieties of electromagnetic localization methods have been implemented： one uses direct current（DC） to generate the electromagnetic field, and the other uses alternating current （AC）. The two varieties of the localization principle were analyzed and relevant experiments were made. The experiments show that the alternating electromagnetic method acquires higher accuracy, higher stability and wider measurement range.     

Connecting e-hailing to mass transit platform: Analysis of relative spatial position

This paper analyzes and compares two different relative spatial position (RSP) designs in an integrated e-hailing/fixed-route transit system: a zone-based design that operates e-hailing vehicles within a zone, and a line-based design that operates e-hailing vehicles along a fixed-route transit line and with a stable headway. To conduct a meaningful comparison, the optimal design problems for both systems are formulated using a same analytical framework based on the continuous approximation approach. A comprehensive numerical experiment is performed to compare various cost components corresponding to the optimal designs, and a discrete-event simulation model is developed to validate the analysis. The analytical and simulation results agree with each other well, with a discrepancy in the total system cost less than 5% in most test scenarios. These results also suggest that the line-based system consistently outperforms the zone-based system in terms of both agency and user costs, for all scenarios tested. Compared to the zone-based design, the line-based design features a sparser fixed-route network (resulting in larger stop spacing) but a higher dispatching frequency. It is concluded that the higher efficiency of the line-based design is likely derived from the strategy of operating e-hailing vehicles with a more regular route/headway structure and allowing ride-sharing.     

计算机联锁与自闭结合中防追尾电路设计改进

对计算机联锁与区间自闭反向结合电路设计中各闭塞分区轨道电路的连续检查存在的问题进行了分析,并提出了几种解决方案供借鉴。     

信号故障诊断专家系统

描述了铁路信号故障诊断专家系统的基本结构和工作原理，提出了基于规则的故障诊断自学习新方法，并详细说明了知识库的建立及推理方法。     

营业线站场改造过渡插入道岔的联锁电路处理方法

以北同蒲线万吨站场股道延长改造工程为例,分别对新铺设的临时道岔纳入联锁电路的方法进行介绍,实现对其密贴状态的监控。     

合武铁路列控与联锁系统工程结合设计

简单介绍了合武铁路的列控和联锁系统，并对列控与联锁系统工程结合设计思路进行分析描述。     

Estimation of wheel–rail friction for vehicle certification

In certification of new rail vehicles with respect to running characteristics, a wide variety of operating conditions needs to be considered. However, in associated test runs the wheel–rail friction condition is difficult to handle because the friction coefficient needs to be fairly high and the friction is also generally hard to assess. This is an issue that has been studied in the European project DynoTRAIN and part of the results is presented in this paper. More specifically, an algorithm for estimating the wheel–rail friction coefficient at vehicle certification tests is proposed. Owing to lack of some measurement results, the algorithm here is evaluated in a simulation environment which is also an important step towards practical implementation. A quality measure of the friction estimate is suggested in terms of estimated wheel–rail spin and total creep. It is concluded that, tentatively, the total creep should exceed 0.006 and the spin should be less than 1.0 m^?1 for the algorithm to give a good friction estimate. Sensitivity analysis is carried out to imitate measurement errors, but should be expanded in further work.     

跨海钢混结合梁斜拉桥边跨施工方案研究

福厦客专安海湾特大桥主桥为国内首座跨海高速铁路结合箱形截面梁斜拉桥,该桥主桥采用(40+135+300+135+40)m双塔双索面斜拉桥跨越安海湾航道。本文结合桥址处水浅、滩涂发育,潮汐明显,周围养殖密布等影响因素,对边跨钢箱梁进行了悬臂拼装施工、高位支架滑移施工、高位支架顶推施工等多方案比选,同时针对顶推方案又从顶推过程是否设置前导梁,是否一次性带桥面板上桥及实施中所用工装设备、顶推支架进行了综合比选,重点对无导梁不带板顶推施工方案进行了介绍,为以后类似工程施工提供借鉴。     

计算机联锁仿真试验自动执行平台研究

介绍车站计算机联锁仿真试验通过计算机技术模拟人工操作,实现仿真试验自动执行平台的方案。通过分析当前计算机联锁仿真试验的现状,提出采用自动执行平台的解决方案,从平台任务设计、功能接口、执行流程等主要方面论述平台的方案实现,最后通过平台初版的示例站应用验证方案的效果,分析平台研究的下一阶段目标及未来价值。