自动变速器齿轮系统传动比计算与分析

自动变速器齿轮系统结构复杂,形式多样,它和控制阀体、液力变矩器被列为自动变速器的三大主要部件与认知难点。为了搞清它的结构和动力传递,结合典型结构简图,分析自动变速器3种类型齿轮系统的结构特点和动力路线,提出相应齿轮系统的传动比计算方法。     

电动液压动力转向控制技术

随着人们对汽车经济性、环保性及安全性的日益重视及小排量轿车的发展,电子控制及电动液压动力转向技术在汽车上的应用也已经越来越多,大大提高了汽车驾驶的舒适性、安全性和稳定性。介绍了汽车电动液压动力转向系统的特点、结构及控制原理。     

雾化液滴尺寸和速度分布函数的推导

为了增强雾化液滴质量和热量的传递,有效预测与评价喷雾质量,应用最大熵原理和动量守恒定律推导出了新的雾化液滴尺寸和速度的概率密度分布函数,包括数目分布函数、数目微分分布函数、体积分布函数、体积微分分布函数与总体积公式。当不考虑速度分布时,推导的喷雾液滴尺寸分布与曹建明先前推导的尺寸分布具有完全相同的形式,其分布函数是Nukiyama-Tanasawa型雾化液滴尺寸分布函数的一种特定形式,推导结果具有普适意义。     

唐山中低速磁悬浮列车试验线牵引供电系统

为进行中低速磁悬浮列车的各项功能试验,在唐山修建了1.5 km的试验线.根据试验线系统的特点,阐述了其牵引供电系统供电电压制式的选择,牵引变电所的主接线、设计原则、负荷容量的计算方法及主要电气设备.通过设计和试验,掌握了中低速磁悬浮列车牵引变电系统的设计要求及设备选型原则.     

基于内燃动车组的混合动力匹配设计研究

针对内燃动力轨道交通在实际应用中存在的不足以及当前主要新能源技术发展现状,文章结合某内燃动车组的总体参数和配置情况,将内燃机组匹配蓄电池的混合动力方案与纯内燃机组方案进行对比分析,并对混合动力选型和配置进行了计算和分析.结果表明,混合动力匹配方案在降低整车能耗和节省燃油消耗等方面有着显著的优势.     

大型油船进出钦州港拖船功率探讨

为了确定大型油轮进出港口所需拖轮功率,通过对目前最常用的两种确定功率的方法进行对比分析,得出各自的优点和不足,结合钦州港实际情况,运用这两种方法确定在不同条件下,大型油轮进出钦州港所需拖轮功率。     

车辆动力性能评价仿真系统设计

运用LabVIEW图形化编程软件,通过结构化设计及模块化编程,设计出车辆动力性能评价仿真系统.该仿真系统考虑了多种参数对车辆动力性能的影响,并且能够处理Excel扭矩数据表格和生成Word报表文档,使用方便,仿真结果准确性较高.利用此仿真结果可进一步优化车辆的结构参数,从而提高车辆的动力性能.     

The Evaluation of the 2nd Ocean Plan in Korea: Focused on the Implementing Power of the Plan

There seem to be two types of ocean planning system in the world. First, the federal or united government suggests a basic framework of the plan which is followed by states, countries or areas as shown in the European Union, the United States, Canada, Australia, and so on. Second, a powerful central government prepares a basic ocean plan that guides the following sector plans of the relevant ministries. These cases are shown in Japan, Korea, and China. In Korea, the 2nd Ocean and Fishery Development Plan (OK21, 2011–2020) was made as a comprehensive ocean plan reflecting recent natural and social changes including global warming. The OK21 is declarative in its nature, and so evaluated by its sector plans, which have some specific implementing means such as budgets and manpower, organization, and so on, by the relevant laws. The 2nd OK21 is supported by 21 legally binding sector plans, 14 more than in the 1st plan, thus guaranteeing more effective implementation than in the 1st plan. In addition, most of sector plans are planned to be carried out through the well-coordinated system among the related ministries, thus showing a high degree of implementing efficiency of the plan. Every marine area in the plan, including marine environment, is being supported by more sector plans than before, indicating the equitable development of marine areas in the future. In sum, the 2nd OK21 is expected to show more implementing power due to the well-organized sector plans than in the 1st plan.     

Experimental and finite element analysis of fatigue strength for 300 mm2 copper power conductor

The fatigue strength of a 300 mm² stranded copper conductor was investigated experimentally and by finite element (FE) analysis. An analytical model was also developed and validated. Wires taken from the outer layer of the conductor were fatigue tested in tension–tension loading and compared with similar data for wires taken from a 95 mm² conductor. The wire cross section was deformed due to the compacting process that was applied during fabrication. When corrected for stress concentrations due to the deformation the data for the two sets of wire fell within the same scatter-band. Full scale testing was carried out in a specially designed rig with constant tensile load and reversed displacement controlled bending with a fixed curvature variation. The loading is a simulation of the loading of a power cable hanging from a floating vessel through a bellmouth. Conductors were tested in two states; dry and lubricated. A finite element model was established for the copper conductor. The model was formulated by a combination of elastic beam and beam-contact elements that included the effects of friction. The effect of local bending due to contact forces was included in the model. Two contact conditions were investigated; the point (trellis) contact between adjacent layers of wire and the inline contact within each layer and between the first layer (centre wire) and the second layer. The FE model was validated by a calibration test of a full scale conductor, and by sensitivity studies varying the size and the number of elements of the model. Fatigue analysis of the conductor was carried out, based on the S–N curve for individual wires. Taking into account the effects of friction and local bending, agreement was obtained between predicted and experimental fatigue strength of the conductor, for the FE model as well as the analytical model.     

关于海上钻井平台并网发电技术的探讨

本论文对海上钻井平台的发电系统做了一些探讨。提出了并网发电的设想,并对其硬件部分和具体的接入方式做些说明,弥补了现有的风力发电系统的不足。