Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

分离式桥现浇连续箱梁钢管支架施工方案

文章以陈家田分离式桥现浇连续箱梁满堂钢管支架施工为例,介绍了在山区软质地基上进行现浇预应力连续箱梁满堂钢管支架施工的总体布置方案,并通过支架力学检算验证了施工方案的可行性,同时阐述了支架地基处理、支架装拆及加载预压等施工过程。     

基于支持向量机的多传感器船舶火灾探测技术

针对船舶火灾探测误报率高的情况,为提高火灾探测系统的可靠性,提出一种基于支持向量机的多传感器火灾信息融合方法。经过仿真试验证明,通过多传感器探测数据的有效融合,可以大幅提高火灾探测系统的火灾识别率。     

葛洲坝船闸浮式检修门快速精准对位

葛洲坝船闸浮式检修门(以下简称浮门)是葛洲坝船闸检修设备设施的重要组成部分,在停航期检修中起下游挡水作用,为闸室廊道、下游人字门等检修项目提供无水环境。葛洲坝船闸浮式检修门快速精准对位,是提高葛洲坝船闸停航期检修效率的基础。浮门快速精准对位主要分为3个步骤:浮门门体入槽、门体对位、快速沉浮。通过分析葛洲坝船闸浮式检修门对位现状,从浮门影响因素入手分析研究葛洲坝船闸浮门快速精准对位。     

丽香铁路黄山哨隧道下穿岩堆段设计施工关键技术

以下穿岩堆段的丽香铁路黄山哨隧道为工程依托,对岩堆段地表开裂及洞内初期支护边墙严重变形的问题进行研究。地表埋设6根测斜管监测地表位移情况,洞内布置3个断面进行围岩压力、钢架内力、二次衬砌内力、初期支护与二次衬砌间的接触压力、锚杆轴力量测。在分析现场岩堆段洞内外受力机制及原因的基础上,根据数值计算结果优化二次衬砌断面型式及进一步加大二次衬砌厚度及配筋。采取以下措施控制隧道岩堆段变形： 1）地表岩堆土石接触面开裂处增设截排水措施; 2）加大隧道初期支护钢架型号及加长岩堆侧边墙径向系统锚杆; 3）加大隧道边墙轮廓曲率并优化隧道二次衬砌型式为圆顺型; 4）隧道预留变形量加大至30 cm; 5）隧道二次衬砌内净空预留50 cm补强空间; 6）隧道拱部设置42小导管超前支护。现场岩堆段采取以上措施后已顺利施工通过,根据洞内外监测结果显示,结构在安全可控范围内。     

高埋深软硬岩互层地质条件下敞开式TBM岩爆段施工方法研究

基于喜马拉雅山区域某软硬岩性互层地质条件下的深埋隧洞工程,为解决该区域TBM施工过程中的岩爆问题,统计分析了TBM施工过程中的岩爆特征;在施工过程中开展了多种岩爆规避试验,形成了一套较完整的有针对性的施工方法： 1）岩爆风险巡查常态化; 2）超前地质预报和超前处理措施相结合; 3）支护材料和支护方式合理化; 4）掘进参数动态调整。在后续的施工中加以应用,取得了较好的效果,可以为类似地质条件下的安全施工提供参考。     

深埋大断面黄土隧道初期支护受力特征分析

为避免初期支护局部破坏对深埋黄土隧道安全产生危害,依托甘肃省境内早胜3号隧道施工开展深埋大断面黄土隧道初期支护受力规律的现场试验研究。通过埋设振弦式传感器对围岩与初期支护接触压力、喷射混凝土应变、钢拱架应变、相邻钢拱架间作用力进行监测,同时建立模拟隧道施工的有限元计算模型,分析得到初期支护内力分布特点。结果表明： 1) 初期支护受力随时间表现出迅速增长—缓慢增长—逐渐稳定的特点,曲线在二次衬砌闭合12 d后基本稳定; 2)应力空间分布上部大下部小,偏压特性明显,荷载理论计算值偏小; 3) 拱顶及边墙区域为初期支护薄弱部位,需采取措施并加强监控量测; 4)数值计算表明锚杆末端轴力较小,设计中可考虑适当缩短锚杆长度。     

城市公共交通发展的动力机制研究

城市公共交通发展动力涵盖政府的主导作用、公交运营企业的主动力、公众的支持力以及营销传播的助动力等"四方力量",四方力量的协同推动城市公共交通系统快速发展。首先对城市公共交通发展的动力机制进行分析,研究快速发展面临的困境以及进行公共交通系统动力协调的必要性;然后提出强化政府主导作用的"4P"发展策略、激发公交运营企业主动力的品牌服务策略、拓展公众支持力的乘客关系管理策略、发挥营销传播助动力的促销策略等公共交通协同发展策略;由此增强公共交通竞争力,提高公交出行方式分担率,推动城市可持续发展。