A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

基于模糊综合评价法的城市综合管廊结构健康评价方法研究

为解决城市综合管廊结构健康状况评估结果无法量化和指导运维的问题，通过分析模糊综合评价理论在交通隧道结构健康评价方法研究中的应用，依照类比思想，利用该理论建立城市综合管廊结构健康状况评价体系。首先，依据有关养护规定和调研结果，基于不同需求分别建立管廊结构的本体完好状况和本体结构状况评价指标体系； 其次，以交通隧道和综合管廊养护经验为基础，划分各指标的分级判定标准； 然后，采用层次分析法，计算评价指标的权重分配； 最后，采用柯西分布型隶属函数和矩阵型隶属函数确定各指标的隶属度，建立一级和二级模糊综合评价模型，赋予评价向量中各评语相应分值，将评价向量单值化，判定管廊结构健康状况。采用所提出的评价方法应用于实际工程，所得评价结果与经验评判得到的结果相同。     

Vehicle electrification in a developing country: Status and issue,from a well-to-wheel perspective

The increase of public attention, scientific research and political interest in environmental problems associated with transportation has provided the motivation for re-invention of electric vehicles. However the usage of grid-dependent EVs with a high-carbon electricity grid might produce more damage to the environment. This study aims to provide an environmental impact comparison of ICEVs, HEVs and EVs during their usage cycle, by modeling their energy consumption (electricity or fuel) and the supply chains of the supplied energy, (well-to-wheel) based on a life cycle assessment. The results show that running EVs with the existing mixed sources of electrical energy produce larger impacts on the environment 60% of the time; when compared to HEVs. When compared to ICEVs, EVs produce a larger environmental impact on 7 out of 15 environmental impact categories. Overall the environmental impacts of EVs are substantial based on the well-to-wheel analysis. It will continue to be so if no change is made to the methods of electricity generation in the near future. Given that the environmental profile of EVs is linked with the existing national electricity generation mix, the national electricity supply must be made cleaner before the electrification of the urban transport system.     

马鞍山长江公路大桥钢塔线形控制技术

马鞍山长江公路大桥左汊主桥为（360＋2×1080＋360） m的三塔两跨悬索桥，中塔采用钢－混叠合、塔梁固结门式结构，下塔柱为预应力钢筋混凝土结构，上塔柱为钢结构，钢塔共分21个节段，首节采用浮吊安装，标准节段长6 m ，最大起吊重达235 t ，采用塔吊进行安装。为确保钢塔线形满足要求，对影响钢塔安装精度因素进行分析，形成以控制钢塔制造质量为核心、钢塔首节段安装精度为基础的线形控制流程，对钢塔节段进行工厂制造控制和现场安装控制。工厂制造控制包括零部件加工、块体制作、节段组拼、端面机加工、预拼装；现场安装控制包括首节段安装、标准节段安装、横梁与钢塔的连接。实践表明，该桥采用以控制钢塔制造精度为核心的钢塔线形控制技术进行钢塔架设施工，施工过程中钢塔制造精度和安装精度满足要求，实现了钢塔线形控制的目的。     

Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

基于决策偏好的ETC系统评价指标体系及评价方法

为更好地反映不同决策者对电子收费系统（ETC）评价的偏好,从政府、运营者和付费者三个主要利益主体的角度对ETC系统的评价指标及评价方法进行了研究。根据评价指标体系筛选原则,确定了基于决策偏好的ETC系统评价指标体系;通过综合分析成本-效益法（CBA）和数据包络分析法（DEA）的各自特点,依据基于决策偏好所确定的评价指标,同时引入当前一些比较好的算法来优化CBA,DEA和AHP法,建立数学模型,从而确立了基于决策偏好的综合评价方法。该方法较为全面地对ETC系统社会经济影响进行评价,所建立的指标体系和方法能更直观、更可靠地反映出决策者的决策偏好。     

公路生态系统服务功能分析及评估

文章探讨了公路生态系统的生态服务功能,提出价值评估指标体系及定量评估方法,为公路生态系统的恢复或重建提供理论依据,对全面、正确评价公路生态系统有积极意义。     

厦门地铁2号线钻探工程海上通航安全评估

依据港口通航现状、港口发展规划、附近海域船舶交通现况,分析通航安全形势,预测厦门轨道交通2号线跨海路段施工期间,船舶交通流可能的变化和通航环境、通航秩序的适应能力,论证在施工期间存在的通航安全风险、主要问题及通航安全保障能力,并提出保障通航安全的可行性建议和措施.     

基于名义应力法的动车组车体净水箱吊装部件疲劳强度分析

针对高速运行动车组车体悬挂设备振动疲劳损伤问题,以某型动车组车顶净水箱吊装结构为研究对象,采用名义应力法对吊装结构的焊缝部位进行疲劳强度评估.根据EN 12663标准确定净水箱的工作载荷工况,采用有限元法计算了各工况下结构的振动响应,并基于BS标准计算了焊缝疲劳评估点的寿命.假定各载荷工况出现频率相同的情况下,构造了工作载荷历程,采用Fe-safe软件对焊缝的疲劳寿命进行了仿真分析.两种方法分析结果均表明:焊缝1与焊缝2寿命最低,是结构最易发生疲劳破坏的位置;焊缝位于筋板表面的焊趾寿命低于位于主支撑板表面的焊趾寿命.     

基于裂纹扩展理论的船体结构疲劳评估

疲劳破坏是船舶结构的主要破坏形式之一。为了保证船舶结构有足够的疲劳强度,各国船级社、船厂等均建立了船舶结构疲劳强度校核规范作为船舶疲劳评估的指导性文件,尽管这些规范均是建立在S-N曲线方法基础上的,但由于S-N曲线方法存在自身无法克服的缺陷(如忽略材料的初始缺陷等),对同一节点进行计算得到的疲劳寿命大相径庭。该文作者在基于裂纹扩展理论的基础之上,给出了一套详细的船体结构疲劳评估方法,并应用此方法对大型船舶结构典型节点的疲劳寿命进行评估,以期能为完善船舶结构疲劳寿命的评估提供参考。